qlcnic: Rearrange ordering of header files inclusion

Include local headers files after kernel's header files.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -24,9 +24,7 @@
 #include <linux/mii.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
-
 #include <linux/vmalloc.h>
-
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/bitops.h>

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -5,14 +5,15 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
-#include "qlcnic.h"
-#include "qlcnic_sriov.h"
 #include <linux/if_vlan.h>
 #include <linux/ipv6.h>
 #include <linux/ethtool.h>
 #include <linux/interrupt.h>
 #include <linux/aer.h>
 
+#include "qlcnic.h"
+#include "qlcnic_sriov.h"
+
 static void __qlcnic_83xx_process_aen(struct qlcnic_adapter *);
 static int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *, u8);
 static void qlcnic_83xx_configure_mac(struct qlcnic_adapter *, u8 *, u8,

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h

@@ -10,6 +10,7 @@
 
 #include <linux/types.h>
 #include <linux/etherdevice.h>
+
 #include "qlcnic_hw.h"
 
 #define QLCNIC_83XX_BAR0_LENGTH 0x4000

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c

@@ -5,13 +5,13 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
-#include "qlcnic.h"
-#include "qlcnic_hdr.h"
-
 #include <linux/slab.h>
 #include <net/ip.h>
 #include <linux/bitops.h>
 
+#include "qlcnic.h"
+#include "qlcnic_hdr.h"
+
 #define MASK(n) ((1ULL<<(n))-1)
 #define OCM_WIN_P3P(addr) (addr & 0xffc0000)
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -7,11 +7,6 @@
 
 #include <linux/vmalloc.h>
 #include <linux/interrupt.h>
-
-#include "qlcnic.h"
-#include "qlcnic_sriov.h"
-#include "qlcnic_hw.h"
-
 #include <linux/swab.h>
 #include <linux/dma-mapping.h>
 #include <linux/if_vlan.h>
@@ -25,6 +20,10 @@
 #include <net/vxlan.h>
 #endif
 
+#include "qlcnic.h"
+#include "qlcnic_sriov.h"
+#include "qlcnic_hw.h"
+
 MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(QLCNIC_LINUX_VERSIONID);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c

@@ -5,13 +5,13 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <net/ip.h>
+
 #include "qlcnic.h"
 #include "qlcnic_hdr.h"
 #include "qlcnic_83xx_hw.h"
 #include "qlcnic_hw.h"
 
-#include <net/ip.h>
-
 #define QLC_83XX_MINIDUMP_FLASH		0x520000
 #define QLC_83XX_OCM_INDEX			3
 #define QLC_83XX_PCI_INDEX			0

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h

@@ -8,10 +8,11 @@
 #ifndef _QLCNIC_83XX_SRIOV_H_
 #define _QLCNIC_83XX_SRIOV_H_
 
-#include "qlcnic.h"
 #include <linux/types.h>
 #include <linux/pci.h>
 
+#include "qlcnic.h"
+
 extern const u32 qlcnic_83xx_reg_tbl[];
 extern const u32 qlcnic_83xx_ext_reg_tbl[];
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c

@@ -5,10 +5,11 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <linux/types.h>
+
 #include "qlcnic_sriov.h"
 #include "qlcnic.h"
 #include "qlcnic_83xx_hw.h"
-#include <linux/types.h>
 
 #define QLC_BC_COMMAND	0
 #define QLC_BC_RESPONSE	1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c

@@ -5,9 +5,10 @@
  * See LICENSE.qlcnic for copyright and licensing details.
  */
 
+#include <linux/types.h>
+
 #include "qlcnic_sriov.h"
 #include "qlcnic.h"
-#include <linux/types.h>
 
 #define QLCNIC_SRIOV_VF_MAX_MAC 7
 #define QLC_VF_MIN_TX_RATE	100

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c

@@ -7,10 +7,6 @@
 
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-
-#include "qlcnic.h"
-#include "qlcnic_hw.h"
-
 #include <linux/swab.h>
 #include <linux/dma-mapping.h>
 #include <net/ip.h>
@@ -24,6 +20,9 @@
 #include <linux/hwmon-sysfs.h>
 #endif
 
+#include "qlcnic.h"
+#include "qlcnic_hw.h"
+
 int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable)
 {
 	return -EOPNOTSUPP;