Commit a94f0181 authored by Artur Petrosyan's avatar Artur Petrosyan Committed by Greg Kroah-Hartman

usb: dwc2: Add exit hibernation mode before removing drive

When dwc2 core is in hibernation mode loading
driver again causes driver fail. Because in
that mode registers are not accessible.

In order to exit from hibernation checking
dwc2 core power saving state in "dwc2_driver_remove()"
function. If core is in hibernation, then checking the
operational mode of the driver. To check whether dwc2 core
is operating in host mode or device mode there is one way
which is retrieving the backup value of "gotgctl" and compare
the "CurMod" value. If previously core entered hibernation
in host mode then the exit is performed for host if not then
exit is performed for device mode. The introduced checking
is because in hibernation state all registers are not
accessible.
Reported-by: default avatarkernel test robot <lkp@intel.com>
Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarMinas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: default avatarArtur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124827.9BB59A005D@mailhost.synopsys.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ae0da4fd
......@@ -316,8 +316,23 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
struct dwc2_gregs_backup *gr;
int ret = 0;
gr = &hsotg->gr_backup;
/* Exit Hibernation when driver is removed. */
if (hsotg->hibernated) {
if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
else
ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
}
/* Exit Partial Power Down when driver is removed. */
if (hsotg->in_ppd) {
ret = dwc2_exit_partial_power_down(hsotg, 0, true);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment