drm/i915: move rawclk from runtime to display runtime info

It's mostly about display, so move it under display. This should also
fix rawclk freq initialization in the xe driver.

v2: Change the init location

Link: https://lore.kernel.org/r/20240819133138.147511-2-maarten.lankhorst@linux.intel.com
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39330d09c48509e013f01fd0247a9b7c291173e2.1724144570.git.jani.nikula@intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/display/intel_backlight.c

@@ -1011,7 +1011,7 @@ static u32 cnp_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 {
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 
-	return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq),
+	return DIV_ROUND_CLOSEST(KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq),
 				 pwm_freq_hz);
 }
 
@@ -1073,7 +1073,7 @@ static u32 pch_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 {
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 
-	return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq),
+	return DIV_ROUND_CLOSEST(KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq),
 				 pwm_freq_hz * 128);
 }
 
@@ -1091,7 +1091,7 @@ static u32 i9xx_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 	int clock;
 
 	if (IS_PINEVIEW(i915))
-		clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+		clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
 	else
 		clock = KHz(i915->display.cdclk.hw.cdclk);
 
@@ -1109,7 +1109,7 @@ static u32 i965_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 	int clock;
 
 	if (IS_G4X(i915))
-		clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+		clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
 	else
 		clock = KHz(i915->display.cdclk.hw.cdclk);
 
@@ -1133,7 +1133,7 @@ static u32 vlv_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
 			clock = MHz(25);
 		mul = 16;
 	} else {
-		clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+		clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
 		mul = 128;
 	}
 

drivers/gpu/drm/i915/display/intel_display_device.c

@@ -1474,6 +1474,9 @@ static void __intel_display_device_info_runtime_init(struct drm_i915_private *i9
 		}
 	}
 
+	display_runtime->rawclk_freq = intel_read_rawclk(i915);
+	drm_dbg_kms(&i915->drm, "rawclk rate: %d kHz\n", display_runtime->rawclk_freq);
+
 	return;
 
 display_fused_off:
@@ -1516,6 +1519,8 @@ void intel_display_device_info_print(const struct intel_display_device_info *inf
 	drm_printf(p, "has_hdcp: %s\n", str_yes_no(runtime->has_hdcp));
 	drm_printf(p, "has_dmc: %s\n", str_yes_no(runtime->has_dmc));
 	drm_printf(p, "has_dsc: %s\n", str_yes_no(runtime->has_dsc));
+
+	drm_printf(p, "rawclk rate: %u kHz\n", runtime->rawclk_freq);
 }
 
 /*

drivers/gpu/drm/i915/display/intel_display_device.h

@@ -204,6 +204,8 @@ struct intel_display_runtime_info {
 		u16 step;
 	} ip;
 
+	u32 rawclk_freq;
+
 	u8 pipe_mask;
 	u8 cpu_transcoder_mask;
 	u16 port_mask;

drivers/gpu/drm/i915/display/intel_display_power_well.c

@@ -1176,9 +1176,9 @@ static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
 		       MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
 	intel_de_write(dev_priv, CBR1_VLV, 0);
 
-	drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
+	drm_WARN_ON(&dev_priv->drm, DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
 	intel_de_write(dev_priv, RAWCLK_FREQ_VLV,
-		       DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq,
+		       DIV_ROUND_CLOSEST(DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq,
 					 1000));
 }
 

drivers/gpu/drm/i915/display/intel_dp_aux.c

@@ -83,7 +83,7 @@ static u32 g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	 * The clock divider is based off the hrawclk, and would like to run at
 	 * 2MHz.  So, take the hrawclk value and divide by 2000 and use that
 	 */
-	return DIV_ROUND_CLOSEST(RUNTIME_INFO(i915)->rawclk_freq, 2000);
+	return DIV_ROUND_CLOSEST(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq, 2000);
 }
 
 static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
@@ -103,7 +103,7 @@ static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	if (dig_port->aux_ch == AUX_CH_A)
 		freq = i915->display.cdclk.hw.cdclk;
 	else
-		freq = RUNTIME_INFO(i915)->rawclk_freq;
+		freq = DISPLAY_RUNTIME_INFO(i915)->rawclk_freq;
 	return DIV_ROUND_CLOSEST(freq, 2000);
 }
 

drivers/gpu/drm/i915/display/intel_pps.c

@@ -1483,7 +1483,7 @@ static void pps_init_registers(struct intel_dp *intel_dp, bool force_disable_vdd
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u32 pp_on, pp_off, port_sel = 0;
-	int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
+	int div = DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
 	struct pps_registers regs;
 	enum port port = dp_to_dig_port(intel_dp)->base.port;
 	const struct edp_power_seq *seq = &intel_dp->pps.pps_delays;

drivers/gpu/drm/i915/intel_device_info.c

@@ -124,7 +124,6 @@ void intel_device_info_print(const struct intel_device_info *info,
 #undef PRINT_FLAG
 
 	drm_printf(p, "has_pooled_eu: %s\n", str_yes_no(runtime->has_pooled_eu));
-	drm_printf(p, "rawclk rate: %u kHz\n", runtime->rawclk_freq);
 }
 
 #define ID(id) (id)
@@ -370,10 +369,6 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 			 "Disabling ppGTT for VT-d support\n");
 		runtime->ppgtt_type = INTEL_PPGTT_NONE;
 	}
-
-	runtime->rawclk_freq = intel_read_rawclk(dev_priv);
-	drm_dbg(&dev_priv->drm, "rawclk rate: %d kHz\n", runtime->rawclk_freq);
-
 }
 
 /*

drivers/gpu/drm/i915/intel_device_info.h

@@ -204,8 +204,6 @@ struct intel_runtime_info {
 
 	u16 device_id;
 
-	u32 rawclk_freq;
-
 	struct intel_step_info step;
 
 	unsigned int page_sizes; /* page sizes supported by the HW */