Commit a9606ce6 authored by Daniel Gimpelevich's avatar Daniel Gimpelevich Committed by Mauro Carvalho Chehab

V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7

Signed-off-by: default avatarDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent fc60d6e2
...@@ -60,7 +60,7 @@ ...@@ -60,7 +60,7 @@
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788] 60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18] 61 -> Winfast TV2000 XP Global [107d:6f18]
62 -> PowerColor Real Angel 330 [14f1:ea3d] 62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852] 63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610] 65 -> DViCO FusionHDTV 7 Gold [18ac:d610]
......
...@@ -1493,10 +1493,16 @@ static const struct cx88_board cx88_boards[] = { ...@@ -1493,10 +1493,16 @@ static const struct cx88_board cx88_boards[] = {
}, },
}, },
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
.name = "PowerColor Real Angel 330", .name = "PowerColor RA330", /* Long names may confuse LIRC. */
.tuner_type = TUNER_XC2028, .tuner_type = TUNER_XC2028,
.tuner_addr = 0x61, .tuner_addr = 0x61,
.input = { { .input = { {
.type = CX88_VMUX_DEBUG,
.vmux = 3, /* Due to the way the cx88 driver is written, */
.gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
.gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
.gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
}, { /* from the tuner on boot for a little while. */
.type = CX88_VMUX_TELEVISION, .type = CX88_VMUX_TELEVISION,
.vmux = 0, .vmux = 0,
.gpio0 = 0x00ff, .gpio0 = 0x00ff,
...@@ -2424,8 +2430,9 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) ...@@ -2424,8 +2430,9 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
switch (core->boardnr) { switch (core->boardnr) {
case CX88_BOARD_POWERCOLOR_REAL_ANGEL: case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
/* Doesn't work with firmware version 2.7 */ /* Now works with firmware version 2.7 */
ctl->fname = "xc3028-v25.fw"; if (core->i2c_algo.udelay < 16)
core->i2c_algo.udelay = 16;
break; break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
ctl->scode_table = XC3028_FE_ZARLINK456; ctl->scode_table = XC3028_FE_ZARLINK456;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment