Commit a97d67d1 authored by Matt Porter's avatar Matt Porter

ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot

The BCM28155-AP board has a bootloader that expects the camldo1
regulator to be enabled on entry. Currently, the camldo1 regulator
is disabled when no longer in use as is the case during a reboot /
warm reset. This causes the early bootloader to hang upon entry. Add
regulator-always-on to the camldo1 constraint to fix reboot.
Reported-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarMatt Porter <mporter@linaro.org>
Tested-by: default avatarAlex Elder <elder@linaro.org>
parent a51b4c01
......@@ -89,6 +89,7 @@ regulators {
camldo1_reg: camldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sdldo_reg: sdldo {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment