Commit a985b66a authored by Maxime Coquelin's avatar Maxime Coquelin

ARM: dts: stm32f429: Fix clocks referenced by GPIO banks

All the clocks referenced by the GPIO banks were not the good ones.
Reported-by: default avatarBruno Herrera <bruherrera@gmail.com>
Signed-off-by: default avatarMaxime Coquelin <mcoquelin.stm32@gmail.com>
parent f48e3d68
......@@ -182,7 +182,7 @@ gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 256>;
clocks = <&rcc 0 0>;
st,bank-name = "GPIOA";
};
......@@ -190,7 +190,7 @@ gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 257>;
clocks = <&rcc 0 1>;
st,bank-name = "GPIOB";
};
......@@ -198,7 +198,7 @@ gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 258>;
clocks = <&rcc 0 2>;
st,bank-name = "GPIOC";
};
......@@ -206,7 +206,7 @@ gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 259>;
clocks = <&rcc 0 3>;
st,bank-name = "GPIOD";
};
......@@ -214,7 +214,7 @@ gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 260>;
clocks = <&rcc 0 4>;
st,bank-name = "GPIOE";
};
......@@ -222,7 +222,7 @@ gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 261>;
clocks = <&rcc 0 5>;
st,bank-name = "GPIOF";
};
......@@ -230,7 +230,7 @@ gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 262>;
clocks = <&rcc 0 6>;
st,bank-name = "GPIOG";
};
......@@ -238,7 +238,7 @@ gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 263>;
clocks = <&rcc 0 7>;
st,bank-name = "GPIOH";
};
......@@ -246,7 +246,7 @@ gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 264>;
clocks = <&rcc 0 8>;
st,bank-name = "GPIOI";
};
......@@ -254,7 +254,7 @@ gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 265>;
clocks = <&rcc 0 9>;
st,bank-name = "GPIOJ";
};
......@@ -262,7 +262,7 @@ gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 266>;
clocks = <&rcc 0 10>;
st,bank-name = "GPIOK";
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment