Merge tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "There's quite a lot of changes for SPI in this release but none in the
  core, they're all mostly small driver updates and additions. Some of
  the more notable changes include:

   - A huge set of cleanups, optimizations and improvements for the
     DesignWare driver from Serge Semin finishing up the work started
     last release.

   - Conversion of the Zynq gqspi driver to spi-mem.

   - Support for Baikal T1, Broadcom BCMSTB 7445, and Renesas R8A7742"

* tag 'spi-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (137 commits)
  spi: cadence: Add SPI transfer delays
  spi: dw: Add Baikal-T1 SPI Controller bindings
  spi: dw: Add Baikal-T1 SPI Controller glue driver
  spi: dw: Add poll-based SPI transfers support
  spi: dw: Introduce max mem-ops SPI bus frequency setting
  spi: dw: Add memory operations support
  spi: dw: Add generic DW SSI status-check method
  spi: dw: Move num-of retries parameter to the header file
  spi: dw: Explicitly de-assert CS on SPI transfer completion
  spi: dw: De-assert chip-select on reset
  spi: dw: Discard chip enabling on DMA setup error
  spi: dw: Unmask IRQs after enabling the chip
  spi: dw: Perform IRQ setup in a dedicated function
  spi: dw: Refactor IRQ-based SPI transfer procedure
  spi: dw: Refactor data IO procedure
  spi: dw: Add DW SPI controller config structure
  spi: dw: Update Rx sample delay in the config function
  spi: dw: Simplify the SPI bus speed config procedure
  spi: dw: Update SPI bus speed in a config function
  spi: dw: Detach SPI device specific CR0 config method
  ...

Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml

@@ -19,6 +19,7 @@ properties:
   compatible:
     enum:
       - ibm,fsi2spi
+      - ibm,fsi2spi-restricted
 
   reg:
     items:

Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt

@@ -32,6 +32,8 @@ Required properties:
     			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7445-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+                                                                            BRCMSTB  SoCs
     "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI

Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serial NOR flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Bayi Cheng <bayi.cheng@mediatek.com>
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  This spi controller support single, dual, or quad mode transfer for
+  SPI NOR flash. There should be only one spi slave device following
+  generic spi bindings. It's not recommended to use this controller
+  for devices other than SPI NOR flash due to limited transfer
+  capability of this controller.
+
+allOf:
+  - $ref: /spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-nor
+              - mediatek,mt2712-nor
+              - mediatek,mt7622-nor
+              - mediatek,mt7623-nor
+              - mediatek,mt7629-nor
+              - mediatek,mt8192-nor
+          - enum:
+              - mediatek,mt8173-nor
+      - items:
+          - const: mediatek,mt8173-nor
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock used for spi bus
+      - description: clock used for controller
+
+  clock-names:
+    items:
+      - const: spi
+      - const: sf
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      nor_flash: spi@1100d000 {
+        compatible = "mediatek,mt8173-nor";
+        reg = <0 0x1100d000 0 0xe0>;
+        interrupts = <&spi_flash_irq>;
+        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+        clock-names = "spi", "sf";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "jedec,spi-nor";
+          reg = <0>;
+        };
+      };
+    };
+

Documentation/devicetree/bindings/spi/renesas,rspi.yaml

@@ -25,6 +25,7 @@ properties:
 
       - items:
           - enum:
+              - renesas,qspi-r8a7742   # RZ/G1H
               - renesas,qspi-r8a7743   # RZ/G1M
               - renesas,qspi-r8a7744   # RZ/G1N
               - renesas,qspi-r8a7745   # RZ/G1E

Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml

@@ -41,6 +41,7 @@ properties:
               - renesas,msiof-r8a774e1      # RZ/G2H
               - renesas,msiof-r8a7795       # R-Car H3
               - renesas,msiof-r8a7796       # R-Car M3-W
+              - renesas,msiof-r8a77961      # R-Car M3-W+
               - renesas,msiof-r8a77965      # R-Car M3-N
               - renesas,msiof-r8a77970      # R-Car V3M
               - renesas,msiof-r8a77980      # R-Car V3H

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

@@ -22,6 +22,21 @@ allOf:
       properties:
         reg:
           minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - baikal,bt1-sys-ssi
+    then:
+      properties:
+        mux-controls:
+          maxItems: 1
+      required:
+        - mux-controls
+    else:
+      required:
+        - interrupts
 
 properties:
   compatible:
@@ -36,6 +51,8 @@ properties:
               - mscc,ocelot-spi
               - mscc,jaguar2-spi
           - const: snps,dw-apb-ssi
+      - description: Microchip Sparx5 SoC SPI Controller
+        const: microchip,sparx5-spi
       - description: Amazon Alpine SPI Controller
         const: amazon,alpine-dw-apb-ssi
       - description: Renesas RZ/N1 SPI Controller
@@ -44,12 +61,16 @@ properties:
           - const: snps,dw-apb-ssi
       - description: Intel Keem Bay SPI Controller
         const: intel,keembay-ssi
+      - description: Baikal-T1 SPI Controller
+        const: baikal,bt1-ssi
+      - description: Baikal-T1 System Boot SPI Controller
+        const: baikal,bt1-sys-ssi
 
   reg:
     minItems: 1
     items:
       - description: DW APB SSI controller memory mapped registers
-      - description: SPI MST region map
+      - description: SPI MST region map or directly mapped SPI ROM
 
   interrupts:
     maxItems: 1
@@ -93,6 +114,12 @@ properties:
       - const: tx
       - const: rx
 
+  rx-sample-delay-ns:
+    default: 0
+    description: Default value of the rx-sample-delay-ns property.
+      This value will be used if the property is not explicitly defined
+      for a SPI slave device. See below.
+
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
@@ -107,6 +134,13 @@ patternProperties:
       spi-tx-bus-width:
         const: 1
 
+      rx-sample-delay-ns:
+        description: SPI Rx sample delay offset, unit is nanoseconds.
+          The delay from the default sample time before the actual
+          sample of the rxd input signal occurs. The "rx_sample_delay"
+          is an optional feature of the designware controller, and the
+          upper limit is also subject to controller configuration.
+
 unevaluatedProperties: false
 
 required:
@@ -114,7 +148,6 @@ required:
   - reg
   - "#address-cells"
   - "#size-cells"
-  - interrupts
   - clocks
 
 examples:
@@ -129,5 +162,22 @@ examples:
       num-cs = <2>;
       cs-gpios = <&gpio0 13 0>,
                  <&gpio0 14 0>;
+      rx-sample-delay-ns = <3>;
+      spi-flash@1 {
+        compatible = "spi-nand";
+        reg = <1>;
+        rx-sample-delay-ns = <7>;
+      };
+    };
+  - |
+    spi@1f040100 {
+      compatible = "baikal,bt1-sys-ssi";
+      reg = <0x1f040100 0x900>,
+            <0x1c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-controls = <&boot_mux>;
+      clocks = <&ccu_sys>;
+      clock-names = "ssi_clk";
     };
 ...

Documentation/devicetree/bindings/spi/spi-mtk-nor.txt

-* Serial NOR flash controller for MediaTek ARM SoCs
-
-Required properties:
-- compatible: 	  For mt8173, compatible should be "mediatek,mt8173-nor",
-		  and it's the fallback compatible for other Soc.
-		  For every other SoC, should contain both the SoC-specific compatible
-		  string and "mediatek,mt8173-nor".
-		  The possible values are:
-		  "mediatek,mt2701-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt2712-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7622-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
-		  "mediatek,mt8173-nor"
-- reg: 		  physical base address and length of the controller's register
-- interrupts:	  Interrupt number used by the controller.
-- clocks: 	  the phandle of the clocks needed by the nor controller
-- clock-names: 	  the names of the clocks
-		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
-		  and "sf" is used for controller, these are the clocks witch
-		  hardware needs to enabling nor flash and nor flash controller.
-		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- #address-cells: should be <1>
-- #size-cells:	  should be <0>
-
-There should be only one spi slave device following generic spi bindings.
-It's not recommended to use this controller for devices other than SPI NOR
-flash due to limited transfer capability of this controller.
-
-Example:
-
-nor_flash: spi@1100d000 {
-	compatible = "mediatek,mt8173-nor";
-	reg = <0 0x1100d000 0 0xe0>;
-	interrupts = <&spi_flash_irq>;
-	clocks = <&pericfg CLK_PERI_SPI>,
-		 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
-	clock-names = "spi", "sf";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-	};
-};
-

drivers/spi/Kconfig

@@ -235,6 +235,7 @@ config SPI_DAVINCI
 
 config SPI_DESIGNWARE
 	tristate "DesignWare SPI controller core support"
+	imply SPI_MEM
 	help
 	  general driver for SPI controller core from DesignWare
 
@@ -251,6 +252,34 @@ config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"
 	depends on HAS_IOMEM
 
+config SPI_DW_BT1
+	tristate "Baikal-T1 SPI driver for DW SPI core"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+	help
+	  Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
+	  controllers. Two of them are pretty much normal: with IRQ, DMA,
+	  FIFOs of 64 words depth, 4x CSs, but the third one as being a
+	  part of the Baikal-T1 System Boot Controller has got a very
+	  limited resources: no IRQ, no DMA, only a single native
+	  chip-select and Tx/Rx FIFO with just 8 words depth available.
+	  The later one is normally connected to an external SPI-nor flash
+	  of 128Mb (in general can be of bigger size).
+
+config SPI_DW_BT1_DIRMAP
+	bool "Directly mapped Baikal-T1 Boot SPI flash support"
+	depends on SPI_DW_BT1
+	select MULTIPLEXER
+	select MUX_MMIO
+	help
+	  Directly mapped SPI flash memory is an interface specific to the
+	  Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
+	  can be used to access a peripheral memory device just by
+	  reading/writing data from/to it. Note that the system APB bus
+	  will stall during each IO from/to the dirmap region until the
+	  operation is finished. So try not to use it concurrently with
+	  time-critical tasks (like the SPI memory operations implemented
+	  in this driver).
+
 endif
 
 config SPI_DLN2
@@ -637,7 +666,7 @@ config SPI_QCOM_QSPI
 
 config SPI_QUP
 	tristate "Qualcomm SPI controller with QUP interface"
-	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
+	depends on ARCH_QCOM || COMPILE_TEST
 	help
 	  Qualcomm Universal Peripheral (QUP) core is an AHB slave that
 	  provides a common data path (an output FIFO and an input FIFO)

drivers/spi/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_SPI_DLN2)			+= spi-dln2.o
 obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
 spi-dw-y				:= spi-dw-core.o
 spi-dw-$(CONFIG_SPI_DW_DMA)		+= spi-dw-dma.o
+obj-$(CONFIG_SPI_DW_BT1)		+= spi-dw-bt1.o
 obj-$(CONFIG_SPI_DW_MMIO)		+= spi-dw-mmio.o
 obj-$(CONFIG_SPI_DW_PCI)		+= spi-dw-pci.o
 obj-$(CONFIG_SPI_EFM32)			+= spi-efm32.o

drivers/spi/spi-armada-3700.c

@@ -848,7 +848,6 @@ static int a3700_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, master);
 
 	spi = spi_master_get_devdata(master);
-	memset(spi, 0, sizeof(struct a3700_spi));
 
 	spi->master = master;
 

drivers/spi/spi-atmel.c

@@ -513,9 +513,8 @@ static int atmel_spi_configure_dma(struct spi_master *master,
 
 	master->dma_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(master->dma_tx)) {
-		err = PTR_ERR(master->dma_tx);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "No TX DMA channel, DMA is disabled\n");
+		err = dev_err_probe(dev, PTR_ERR(master->dma_tx),
+				    "No TX DMA channel, DMA is disabled\n");
 		goto error_clear;
 	}
 
@@ -859,6 +858,7 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
 	csr = spi_readl(as, CSR0 + 4 * chip_select);
 	csr = SPI_BFINS(SCBR, scbr, csr);
 	spi_writel(as, CSR0 + 4 * chip_select, csr);
+	xfer->effective_speed_hz = bus_hz / scbr;
 
 	return 0;
 }

drivers/spi/spi-bcm-qspi.c

@@ -1282,16 +1282,9 @@ static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
 
 static const struct of_device_id bcm_qspi_of_match[] = {
 	{
-		.compatible = "brcm,spi-bcm7425-qspi",
-		.data = &bcm_qspi_no_rev_data,
-	},
-	{
-		.compatible = "brcm,spi-bcm7429-qspi",
-		.data = &bcm_qspi_no_rev_data,
-	},
-	{
-		.compatible = "brcm,spi-bcm7435-qspi",
-		.data = &bcm_qspi_no_rev_data,
+		.compatible = "brcm,spi-bcm7445-qspi",
+		.data = &bcm_qspi_rev_data,
+
 	},
 	{
 		.compatible = "brcm,spi-bcm-qspi",

drivers/spi/spi-bcm2835.c

@@ -1319,11 +1319,8 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 
 	bs->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(bs->clk)) {
-		err = PTR_ERR(bs->clk);
-		if (err == -EPROBE_DEFER)
-			dev_dbg(&pdev->dev, "could not get clk: %d\n", err);
-		else
-			dev_err(&pdev->dev, "could not get clk: %d\n", err);
+		err = dev_err_probe(&pdev->dev, PTR_ERR(bs->clk),
+				    "could not get clk\n");
 		goto out_controller_put;
 	}
 

drivers/spi/spi-cadence-quadspi.c

@@ -1119,11 +1119,8 @@ static int cqspi_request_mmap_dma(struct cqspi_st *cqspi)
 	cqspi->rx_chan = dma_request_chan_by_mask(&mask);
 	if (IS_ERR(cqspi->rx_chan)) {
 		int ret = PTR_ERR(cqspi->rx_chan);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&cqspi->pdev->dev, "No Rx DMA available\n");
 		cqspi->rx_chan = NULL;
-		return ret;
+		return dev_err_probe(&cqspi->pdev->dev, ret, "No Rx DMA available\n");
 	}
 	init_completion(&cqspi->rx_dma_complete);
 

drivers/spi/spi-cadence.c

@@ -418,8 +418,8 @@ static int cdns_transfer_one(struct spi_master *master,
 	xspi->rx_bytes = transfer->len;
 
 	cdns_spi_setup_transfer(spi, transfer);
-
 	cdns_spi_fill_tx_fifo(xspi);
+	spi_transfer_delay_exec(transfer);
 
 	cdns_spi_write(xspi, CDNS_SPI_IER, CDNS_SPI_IXR_DEFAULT);
 	return transfer->len;

drivers/spi/spi-dw-bt1.c

+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+//
+// Authors:
+//   Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
+//   Serge Semin <Sergey.Semin@baikalelectronics.ru>
+//
+// Baikal-T1 DW APB SPI and System Boot SPI driver
+//
+
+#include <linux/clk.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/spi/spi-mem.h>
+#include <linux/spi/spi.h>
+
+#include "spi-dw.h"
+
+#define BT1_BOOT_DIRMAP		0
+#define BT1_BOOT_REGS		1
+
+struct dw_spi_bt1 {
+	struct dw_spi		dws;
+	struct clk		*clk;
+	struct mux_control	*mux;
+
+#ifdef CONFIG_SPI_DW_BT1_DIRMAP
+	void __iomem		*map;
+	resource_size_t		map_len;
+#endif
+};
+#define to_dw_spi_bt1(_ctlr) \
+	container_of(spi_controller_get_devdata(_ctlr), struct dw_spi_bt1, dws)
+
+typedef int (*dw_spi_bt1_init_cb)(struct platform_device *pdev,
+				    struct dw_spi_bt1 *dwsbt1);
+
+#ifdef CONFIG_SPI_DW_BT1_DIRMAP
+
+static int dw_spi_bt1_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct dw_spi_bt1 *dwsbt1 = to_dw_spi_bt1(desc->mem->spi->controller);
+
+	if (!dwsbt1->map ||
+	    !dwsbt1->dws.mem_ops.supports_op(desc->mem, &desc->info.op_tmpl))
+		return -EOPNOTSUPP;
+
+	/*
+	 * Make sure the requested region doesn't go out of the physically
+	 * mapped flash memory bounds and the operation is read-only.
+	 */
+	if (desc->info.offset + desc->info.length > dwsbt1->map_len ||
+	    desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+/*
+ * Directly mapped SPI memory region is only accessible in the dword chunks.
+ * That's why we have to create a dedicated read-method to copy data from there
+ * to the passed buffer.
+ */
+static void dw_spi_bt1_dirmap_copy_from_map(void *to, void __iomem *from, size_t len)
+{
+	size_t shift, chunk;
+	u32 data;
+
+	/*
+	 * We split the copying up into the next three stages: unaligned head,
+	 * aligned body, unaligned tail.
+	 */
+	shift = (size_t)from & 0x3;
+	if (shift) {
+		chunk = min_t(size_t, 4 - shift, len);
+		data = readl_relaxed(from - shift);
+		memcpy(to, &data + shift, chunk);
+		from += chunk;
+		to += chunk;
+		len -= chunk;
+	}
+
+	while (len >= 4) {
+		data = readl_relaxed(from);
+		memcpy(to, &data, 4);
+		from += 4;
+		to += 4;
+		len -= 4;
+	}
+
+	if (len) {
+		data = readl_relaxed(from);
+		memcpy(to, &data, len);
+	}
+}
+
+static ssize_t dw_spi_bt1_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				      u64 offs, size_t len, void *buf)
+{
+	struct dw_spi_bt1 *dwsbt1 = to_dw_spi_bt1(desc->mem->spi->controller);
+	struct dw_spi *dws = &dwsbt1->dws;
+	struct spi_mem *mem = desc->mem;
+	struct dw_spi_cfg cfg;
+	int ret;
+
+	/*
+	 * Make sure the requested operation length is valid. Truncate the
+	 * length if it's greater than the length of the MMIO region.
+	 */
+	if (offs >= dwsbt1->map_len || !len)
+		return 0;
+
+	len = min_t(size_t, len, dwsbt1->map_len - offs);
+
+	/* Collect the controller configuration required by the operation */
+	cfg.tmode = SPI_TMOD_EPROMREAD;
+	cfg.dfs = 8;
+	cfg.ndf = 4;
+	cfg.freq = mem->spi->max_speed_hz;
+
+	/* Make sure the corresponding CS is de-asserted on transmission */
+	dw_spi_set_cs(mem->spi, false);
+
+	spi_enable_chip(dws, 0);
+
+	dw_spi_update_config(dws, mem->spi, &cfg);
+
+	spi_umask_intr(dws, SPI_INT_RXFI);
+
+	spi_enable_chip(dws, 1);
+
+	/*
+	 * Enable the transparent mode of the System Boot Controller.
+	 * The SPI core IO should have been locked before calling this method
+	 * so noone would be touching the controller' registers during the
+	 * dirmap operation.
+	 */
+	ret = mux_control_select(dwsbt1->mux, BT1_BOOT_DIRMAP);
+	if (ret)
+		return ret;
+
+	dw_spi_bt1_dirmap_copy_from_map(buf, dwsbt1->map + offs, len);
+
+	mux_control_deselect(dwsbt1->mux);
+
+	dw_spi_set_cs(mem->spi, true);
+
+	ret = dw_spi_check_status(dws, true);
+
+	return ret ?: len;
+}
+
+#endif /* CONFIG_SPI_DW_BT1_DIRMAP */
+
+static int dw_spi_bt1_std_init(struct platform_device *pdev,
+			       struct dw_spi_bt1 *dwsbt1)
+{
+	struct dw_spi *dws = &dwsbt1->dws;
+
+	dws->irq = platform_get_irq(pdev, 0);
+	if (dws->irq < 0)
+		return dws->irq;
+
+	dws->num_cs = 4;
+
+	/*
+	 * Baikal-T1 Normal SPI Controllers don't always keep up with full SPI
+	 * bus speed especially when it comes to the concurrent access to the
+	 * APB bus resources. Thus we have no choice but to set a constraint on
+	 * the SPI bus frequency for the memory operations which require to
+	 * read/write data as fast as possible.
+	 */
+	dws->max_mem_freq = 20000000U;
+
+	dw_spi_dma_setup_generic(dws);
+
+	return 0;
+}
+
+static int dw_spi_bt1_sys_init(struct platform_device *pdev,
+			       struct dw_spi_bt1 *dwsbt1)
+{
+	struct resource *mem __maybe_unused;
+	struct dw_spi *dws = &dwsbt1->dws;
+
+	/*
+	 * Baikal-T1 System Boot Controller is equipped with a mux, which
+	 * switches between the directly mapped SPI flash access mode and
+	 * IO access to the DW APB SSI registers. Note the mux controller
+	 * must be setup to preserve the registers being accessible by default
+	 * (on idle-state).
+	 */
+	dwsbt1->mux = devm_mux_control_get(&pdev->dev, NULL);
+	if (IS_ERR(dwsbt1->mux))
+		return PTR_ERR(dwsbt1->mux);
+
+	/*
+	 * Directly mapped SPI flash memory is a 16MB MMIO region, which can be
+	 * used to access a peripheral memory device just by reading/writing
+	 * data from/to it. Note the system APB bus will stall during each IO
+	 * from/to the dirmap region until the operation is finished. So don't
+	 * use it concurrently with time-critical tasks (like the SPI memory
+	 * operations implemented in the DW APB SSI driver).
+	 */
+#ifdef CONFIG_SPI_DW_BT1_DIRMAP
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (mem) {
+		dwsbt1->map = devm_ioremap_resource(&pdev->dev, mem);
+		if (!IS_ERR(dwsbt1->map)) {
+			dwsbt1->map_len = (mem->end - mem->start + 1);
+			dws->mem_ops.dirmap_create = dw_spi_bt1_dirmap_create;
+			dws->mem_ops.dirmap_read = dw_spi_bt1_dirmap_read;
+		} else {
+			dwsbt1->map = NULL;
+		}
+	}
+#endif /* CONFIG_SPI_DW_BT1_DIRMAP */
+
+	/*
+	 * There is no IRQ, no DMA and just one CS available on the System Boot
+	 * SPI controller.
+	 */
+	dws->irq = IRQ_NOTCONNECTED;
+	dws->num_cs = 1;
+
+	/*
+	 * Baikal-T1 System Boot SPI Controller doesn't keep up with the full
+	 * SPI bus speed due to relatively slow APB bus and races for it'
+	 * resources from different CPUs. The situation is worsen by a small
+	 * FIFOs depth (just 8 words). It works better in a single CPU mode
+	 * though, but still tends to be not fast enough at low CPU
+	 * frequencies.
+	 */
+	if (num_possible_cpus() > 1)
+		dws->max_mem_freq = 10000000U;
+	else
+		dws->max_mem_freq = 20000000U;
+
+	return 0;
+}
+
+static int dw_spi_bt1_probe(struct platform_device *pdev)
+{
+	dw_spi_bt1_init_cb init_func;
+	struct dw_spi_bt1 *dwsbt1;
+	struct resource *mem;
+	struct dw_spi *dws;
+	int ret;
+
+	dwsbt1 = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_bt1), GFP_KERNEL);
+	if (!dwsbt1)
+		return -ENOMEM;
+
+	dws = &dwsbt1->dws;
+
+	dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
+	if (IS_ERR(dws->regs))
+		return PTR_ERR(dws->regs);
+
+	dws->paddr = mem->start;
+
+	dwsbt1->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dwsbt1->clk))
+		return PTR_ERR(dwsbt1->clk);
+
+	ret = clk_prepare_enable(dwsbt1->clk);
+	if (ret)
+		return ret;
+
+	dws->bus_num = pdev->id;
+	dws->reg_io_width = 4;
+	dws->max_freq = clk_get_rate(dwsbt1->clk);
+	if (!dws->max_freq)
+		goto err_disable_clk;
+
+	init_func = device_get_match_data(&pdev->dev);
+	ret = init_func(pdev, dwsbt1);
+	if (ret)
+		goto err_disable_clk;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = dw_spi_add_host(&pdev->dev, dws);
+	if (ret)
+		goto err_disable_clk;
+
+	platform_set_drvdata(pdev, dwsbt1);
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(dwsbt1->clk);
+
+	return ret;
+}
+
+static int dw_spi_bt1_remove(struct platform_device *pdev)
+{
+	struct dw_spi_bt1 *dwsbt1 = platform_get_drvdata(pdev);
+
+	dw_spi_remove_host(&dwsbt1->dws);
+
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(dwsbt1->clk);
+
+	return 0;
+}
+
+static const struct of_device_id dw_spi_bt1_of_match[] = {
+	{ .compatible = "baikal,bt1-ssi", .data = dw_spi_bt1_std_init},
+	{ .compatible = "baikal,bt1-sys-ssi", .data = dw_spi_bt1_sys_init},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dw_spi_bt1_of_match);
+
+static struct platform_driver dw_spi_bt1_driver = {
+	.probe	= dw_spi_bt1_probe,
+	.remove	= dw_spi_bt1_remove,
+	.driver	= {
+		.name		= "bt1-sys-ssi",
+		.of_match_table	= dw_spi_bt1_of_match,
+	},
+};
+module_platform_driver(dw_spi_bt1_driver);
+
+MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>");
+MODULE_DESCRIPTION("Baikal-T1 System Boot SPI Controller driver");
+MODULE_LICENSE("GPL v2");

drivers/spi/spi-dw-mmio.c

@@ -45,16 +45,12 @@ struct dw_spi_mmio {
 #define MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE	BIT(13)
 #define MSCC_SPI_MST_SW_MODE_SW_SPI_CS(x)	(x << 5)
 
-/*
- * For Keem Bay, CTRLR0[31] is used to select controller mode.
- * 0: SSI is slave
- * 1: SSI is master
- */
-#define KEEMBAY_CTRLR0_SSIC_IS_MST		BIT(31)
+#define SPARX5_FORCE_ENA			0xa4
+#define SPARX5_FORCE_VAL			0xa8
 
 struct dw_spi_mscc {
 	struct regmap       *syscon;
-	void __iomem        *spi_mst;
+	void __iomem        *spi_mst; /* Not sparx5 */
 };
 
 /*
@@ -114,9 +110,6 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
 	dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
 	dwsmmio->priv = dwsmscc;
 
-	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
-
 	return 0;
 }
 
@@ -134,13 +127,71 @@ static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
 				JAGUAR2_IF_SI_OWNER_OFFSET);
 }
 
+/*
+ * The Designware SPI controller (referred to as master in the
+ * documentation) automatically deasserts chip select when the tx fifo
+ * is empty. The chip selects then needs to be driven by a CS override
+ * register. enable is an active low signal.
+ */
+static void dw_spi_sparx5_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_master_get_devdata(spi->master);
+	struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+	struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
+	u8 cs = spi->chip_select;
+
+	if (!enable) {
+		/* CS override drive enable */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 1);
+		/* Now set CSx enabled */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~BIT(cs));
+		/* Allow settle */
+		usleep_range(1, 5);
+	} else {
+		/* CS value */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~0);
+		/* Allow settle */
+		usleep_range(1, 5);
+		/* CS override drive disable */
+		regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 0);
+	}
+
+	dw_spi_set_cs(spi, enable);
+}
+
+static int dw_spi_mscc_sparx5_init(struct platform_device *pdev,
+				   struct dw_spi_mmio *dwsmmio)
+{
+	const char *syscon_name = "microchip,sparx5-cpu-syscon";
+	struct device *dev = &pdev->dev;
+	struct dw_spi_mscc *dwsmscc;
+
+	if (!IS_ENABLED(CONFIG_SPI_MUX)) {
+		dev_err(dev, "This driver needs CONFIG_SPI_MUX\n");
+		return -EOPNOTSUPP;
+	}
+
+	dwsmscc = devm_kzalloc(dev, sizeof(*dwsmscc), GFP_KERNEL);
+	if (!dwsmscc)
+		return -ENOMEM;
+
+	dwsmscc->syscon =
+		syscon_regmap_lookup_by_compatible(syscon_name);
+	if (IS_ERR(dwsmscc->syscon)) {
+		dev_err(dev, "No syscon map %s\n", syscon_name);
+		return PTR_ERR(dwsmscc->syscon);
+	}
+
+	dwsmmio->dws.set_cs = dw_spi_sparx5_set_cs;
+	dwsmmio->priv = dwsmscc;
+
+	return 0;
+}
+
 static int dw_spi_alpine_init(struct platform_device *pdev,
 			      struct dw_spi_mmio *dwsmmio)
 {
-	dwsmmio->dws.cs_override = 1;
-
-	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+	dwsmmio->dws.caps = DW_SPI_CAP_CS_OVERRIDE;
 
 	return 0;
 }
@@ -148,9 +199,6 @@ static int dw_spi_alpine_init(struct platform_device *pdev,
 static int dw_spi_dw_apb_init(struct platform_device *pdev,
 			      struct dw_spi_mmio *dwsmmio)
 {
-	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
-
 	dw_spi_dma_setup_generic(&dwsmmio->dws);
 
 	return 0;
@@ -159,28 +207,17 @@ static int dw_spi_dw_apb_init(struct platform_device *pdev,
 static int dw_spi_dwc_ssi_init(struct platform_device *pdev,
 			       struct dw_spi_mmio *dwsmmio)
 {
-	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
+	dwsmmio->dws.caps = DW_SPI_CAP_DWC_SSI;
 
 	dw_spi_dma_setup_generic(&dwsmmio->dws);
 
 	return 0;
 }
 
-static u32 dw_spi_update_cr0_keembay(struct spi_controller *master,
-				     struct spi_device *spi,
-				     struct spi_transfer *transfer)
-{
-	u32 cr0 = dw_spi_update_cr0_v1_01a(master, spi, transfer);
-
-	return cr0 | KEEMBAY_CTRLR0_SSIC_IS_MST;
-}
-
 static int dw_spi_keembay_init(struct platform_device *pdev,
 			       struct dw_spi_mmio *dwsmmio)
 {
-	/* Register hook to configure CTRLR0 */
-	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_keembay;
+	dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST | DW_SPI_CAP_DWC_SSI;
 
 	return 0;
 }
@@ -297,6 +334,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init},
 	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_dwc_ssi_init},
 	{ .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init},
+	{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
 	{ /* end of table */}
 };
 MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);

drivers/spi/spi-dw-pci.c

@@ -48,9 +48,6 @@ static int spi_mid_init(struct dw_spi *dws)
 
 	iounmap(clk_reg);
 
-	/* Register hook to configure CTRLR0 */
-	dws->update_cr0 = dw_spi_update_cr0;
-
 	dw_spi_dma_setup_mfld(dws);
 
 	return 0;
@@ -58,9 +55,6 @@ static int spi_mid_init(struct dw_spi *dws)
 
 static int spi_generic_init(struct dw_spi *dws)
 {
-	/* Register hook to configure CTRLR0 */
-	dws->update_cr0 = dw_spi_update_cr0;
-
 	dw_spi_dma_setup_generic(dws);
 
 	return 0;
@@ -127,18 +121,16 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (desc->setup) {
 			ret = desc->setup(dws);
 			if (ret)
-				return ret;
+				goto err_free_irq_vectors;
 		}
 	} else {
-		pci_free_irq_vectors(pdev);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_free_irq_vectors;
 	}
 
 	ret = dw_spi_add_host(&pdev->dev, dws);
-	if (ret) {
-		pci_free_irq_vectors(pdev);
-		return ret;
-	}
+	if (ret)
+		goto err_free_irq_vectors;
 
 	/* PCI hook and SPI hook use the same drv data */
 	pci_set_drvdata(pdev, dws);
@@ -152,6 +144,10 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pm_runtime_allow(&pdev->dev);
 
 	return 0;
+
+err_free_irq_vectors:
+	pci_free_irq_vectors(pdev);
+	return ret;
 }
 
 static void spi_pci_remove(struct pci_dev *pdev)

drivers/spi/spi-dw.h

@@ -2,11 +2,13 @@
 #ifndef DW_SPI_HEADER_H
 #define DW_SPI_HEADER_H
 
+#include <linux/bits.h>
 #include <linux/completion.h>
 #include <linux/debugfs.h>
 #include <linux/irqreturn.h>
 #include <linux/io.h>
 #include <linux/scatterlist.h>
+#include <linux/spi/spi-mem.h>
 
 /* Register offsets */
 #define DW_SPI_CTRLR0			0x00
@@ -34,6 +36,7 @@
 #define DW_SPI_IDR			0x58
 #define DW_SPI_VERSION			0x5c
 #define DW_SPI_DR			0x60
+#define DW_SPI_RX_SAMPLE_DLY		0xf0
 #define DW_SPI_CS_OVERRIDE		0xf4
 
 /* Bit fields in CTRLR0 */
@@ -69,6 +72,16 @@
 #define DWC_SSI_CTRLR0_FRF_OFFSET	6
 #define DWC_SSI_CTRLR0_DFS_OFFSET	0
 
+/*
+ * For Keem Bay, CTRLR0[31] is used to select controller mode.
+ * 0: SSI is slave
+ * 1: SSI is master
+ */
+#define DWC_SSI_CTRLR0_KEEMBAY_MST	BIT(31)
+
+/* Bit fields in CTRLR1 */
+#define SPI_NDF_MASK			GENMASK(15, 0)
+
 /* Bit fields in SR, 7 bits */
 #define SR_MASK				0x7f		/* cover 7 bits */
 #define SR_BUSY				(1 << 0)
@@ -91,8 +104,12 @@
 #define SPI_DMA_RDMAE			(1 << 0)
 #define SPI_DMA_TDMAE			(1 << 1)
 
-/* TX RX interrupt level threshold, max can be 256 */
-#define SPI_INT_THRESHOLD		32
+#define SPI_WAIT_RETRIES		5
+#define SPI_BUF_SIZE \
+	(sizeof_field(struct spi_mem_op, cmd.opcode) + \
+	 sizeof_field(struct spi_mem_op, addr.val) + 256)
+#define SPI_GET_BYTE(_val, _idx) \
+	((_val) >> (BITS_PER_BYTE * (_idx)) & 0xff)
 
 enum dw_ssi_type {
 	SSI_MOTO_SPI = 0,
@@ -100,6 +117,19 @@ enum dw_ssi_type {
 	SSI_NS_MICROWIRE,
 };
 
+/* DW SPI capabilities */
+#define DW_SPI_CAP_CS_OVERRIDE		BIT(0)
+#define DW_SPI_CAP_KEEMBAY_MST		BIT(1)
+#define DW_SPI_CAP_DWC_SSI		BIT(2)
+
+/* Slave spi_transfer/spi_mem_op related */
+struct dw_spi_cfg {
+	u8 tmode;
+	u8 dfs;
+	u32 ndf;
+	u32 freq;
+};
+
 struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct device *dev, struct dw_spi *dws);
@@ -113,39 +143,43 @@ struct dw_spi_dma_ops {
 
 struct dw_spi {
 	struct spi_controller	*master;
-	enum dw_ssi_type	type;
 
 	void __iomem		*regs;
 	unsigned long		paddr;
 	int			irq;
 	u32			fifo_len;	/* depth of the FIFO buffer */
+	u32			max_mem_freq;	/* max mem-ops bus freq */
 	u32			max_freq;	/* max bus freq supported */
 
-	int			cs_override;
+	u32			caps;		/* DW SPI capabilities */
+
 	u32			reg_io_width;	/* DR I/O width in bytes */
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 	void (*set_cs)(struct spi_device *spi, bool enable);
-	u32 (*update_cr0)(struct spi_controller *master, struct spi_device *spi,
-			  struct spi_transfer *transfer);
 
 	/* Current message transfer state info */
-	size_t			len;
 	void			*tx;
-	void			*tx_end;
-	spinlock_t		buf_lock;
+	unsigned int		tx_len;
 	void			*rx;
-	void			*rx_end;
+	unsigned int		rx_len;
+	u8			buf[SPI_BUF_SIZE];
 	int			dma_mapped;
 	u8			n_bytes;	/* current is a 1/2 bytes op */
 	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
 	u32			current_freq;	/* frequency in hz */
+	u32			cur_rx_sample_dly;
+	u32			def_rx_sample_dly_ns;
+
+	/* Custom memory operations */
+	struct spi_controller_mem_ops mem_ops;
 
 	/* DMA info */
 	struct dma_chan		*txchan;
 	u32			txburst;
 	struct dma_chan		*rxchan;
 	u32			rxburst;
+	u32			dma_sg_burst;
 	unsigned long		dma_chan_busy;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	const struct dw_spi_dma_ops *dma_ops;
@@ -162,29 +196,19 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
 	return __raw_readl(dws->regs + offset);
 }
 
-static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
-{
-	return __raw_readw(dws->regs + offset);
-}
-
 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 {
 	__raw_writel(val, dws->regs + offset);
 }
 
-static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
-{
-	__raw_writew(val, dws->regs + offset);
-}
-
 static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
 {
 	switch (dws->reg_io_width) {
 	case 2:
-		return dw_readw(dws, offset);
+		return readw_relaxed(dws->regs + offset);
 	case 4:
 	default:
-		return dw_readl(dws, offset);
+		return readl_relaxed(dws->regs + offset);
 	}
 }
 
@@ -192,11 +216,11 @@ static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
 {
 	switch (dws->reg_io_width) {
 	case 2:
-		dw_writew(dws, offset, val);
+		writew_relaxed(val, dws->regs + offset);
 		break;
 	case 4:
 	default:
-		dw_writel(dws, offset, val);
+		writel_relaxed(val, dws->regs + offset);
 		break;
 	}
 }
@@ -230,14 +254,16 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
 }
 
 /*
- * This does disable the SPI controller, interrupts, and re-enable the
- * controller back. Transmit and receive FIFO buffers are cleared when the
- * device is disabled.
+ * This disables the SPI controller, interrupts, clears the interrupts status
+ * and CS, then re-enables the controller back. Transmit and receive FIFO
+ * buffers are cleared when the device is disabled.
  */
 static inline void spi_reset_chip(struct dw_spi *dws)
 {
 	spi_enable_chip(dws, 0);
 	spi_mask_intr(dws, 0xff);
+	dw_readl(dws, DW_SPI_ICR);
+	dw_writel(dws, DW_SPI_SER, 0);
 	spi_enable_chip(dws, 1);
 }
 
@@ -248,16 +274,13 @@ static inline void spi_shutdown_chip(struct dw_spi *dws)
 }
 
 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
+extern void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
+				 struct dw_spi_cfg *cfg);
+extern int dw_spi_check_status(struct dw_spi *dws, bool raw);
 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
 extern int dw_spi_resume_host(struct dw_spi *dws);
-extern u32 dw_spi_update_cr0(struct spi_controller *master,
-			     struct spi_device *spi,
-			     struct spi_transfer *transfer);
-extern u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
-				    struct spi_device *spi,
-				    struct spi_transfer *transfer);
 
 #ifdef CONFIG_SPI_DW_DMA
 

drivers/spi/spi-fsi.c

@@ -12,6 +12,7 @@
 
 #define FSI_ENGID_SPI			0x23
 #define FSI_MBOX_ROOT_CTRL_8		0x2860
+#define  FSI_MBOX_ROOT_CTRL_8_SPI_MUX	 0xf0000000
 
 #define FSI2SPI_DATA0			0x00
 #define FSI2SPI_DATA1			0x04
@@ -24,11 +25,16 @@
 
 #define SPI_FSI_BASE			0x70000
 #define SPI_FSI_INIT_TIMEOUT_MS		1000
-#define SPI_FSI_MAX_TRANSFER_SIZE	2048
+#define SPI_FSI_MAX_XFR_SIZE		2048
+#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED	32
 
 #define SPI_FSI_ERROR			0x0
 #define SPI_FSI_COUNTER_CFG		0x1
 #define  SPI_FSI_COUNTER_CFG_LOOPS(x)	 (((u64)(x) & 0xffULL) << 32)
+#define  SPI_FSI_COUNTER_CFG_N2_RX	 BIT_ULL(8)
+#define  SPI_FSI_COUNTER_CFG_N2_TX	 BIT_ULL(9)
+#define  SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
+#define  SPI_FSI_COUNTER_CFG_N2_RELOAD	 BIT_ULL(11)
 #define SPI_FSI_CFG1			0x2
 #define SPI_FSI_CLOCK_CFG		0x3
 #define  SPI_FSI_CLOCK_CFG_MM_ENABLE	 BIT_ULL(32)
@@ -61,7 +67,7 @@
 #define  SPI_FSI_STATUS_RDR_OVERRUN	 BIT_ULL(62)
 #define  SPI_FSI_STATUS_RDR_FULL	 BIT_ULL(63)
 #define  SPI_FSI_STATUS_ANY_ERROR	 \
-	(SPI_FSI_STATUS_ERROR | SPI_FSI_STATUS_TDR_UNDERRUN | \
+	(SPI_FSI_STATUS_ERROR | \
 	 SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \
 	 SPI_FSI_STATUS_RDR_OVERRUN)
 #define SPI_FSI_PORT_CTRL		0x9
@@ -70,6 +76,8 @@ struct fsi_spi {
 	struct device *dev;	/* SPI controller device */
 	struct fsi_device *fsi;	/* FSI2SPI CFAM engine device */
 	u32 base;
+	size_t max_xfr_size;
+	bool restricted;
 };
 
 struct fsi_spi_sequence {
@@ -77,6 +85,26 @@ struct fsi_spi_sequence {
 	u64 data;
 };
 
+static int fsi_spi_check_mux(struct fsi_device *fsi, struct device *dev)
+{
+	int rc;
+	u32 root_ctrl_8;
+	__be32 root_ctrl_8_be;
+
+	rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8_be,
+			    sizeof(root_ctrl_8_be));
+	if (rc)
+		return rc;
+
+	root_ctrl_8 = be32_to_cpu(root_ctrl_8_be);
+	dev_dbg(dev, "Root control register 8: %08x\n", root_ctrl_8);
+	if ((root_ctrl_8 & FSI_MBOX_ROOT_CTRL_8_SPI_MUX) ==
+	     FSI_MBOX_ROOT_CTRL_8_SPI_MUX)
+		return 0;
+
+	return -ENOLINK;
+}
+
 static int fsi_spi_check_status(struct fsi_spi *ctx)
 {
 	int rc;
@@ -205,8 +233,12 @@ static int fsi_spi_reset(struct fsi_spi *ctx)
 	if (rc)
 		return rc;
 
-	return fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
-				 SPI_FSI_CLOCK_CFG_RESET2);
+	rc = fsi_spi_write_reg(ctx, SPI_FSI_CLOCK_CFG,
+			       SPI_FSI_CLOCK_CFG_RESET2);
+	if (rc)
+		return rc;
+
+	return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL);
 }
 
 static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
@@ -214,8 +246,8 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
 	/*
 	 * Add the next byte of instruction to the 8-byte sequence register.
 	 * Then decrement the counter so that the next instruction will go in
-	 * the right place. Return the number of "slots" left in the sequence
-	 * register.
+	 * the right place. Return the index of the slot we just filled in the
+	 * sequence register.
 	 */
 	seq->data |= (u64)val << seq->bit;
 	seq->bit -= 8;
@@ -233,40 +265,71 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
 				     struct fsi_spi_sequence *seq,
 				     struct spi_transfer *transfer)
 {
+	bool docfg = false;
 	int loops;
 	int idx;
 	int rc;
+	u8 val = 0;
 	u8 len = min(transfer->len, 8U);
 	u8 rem = transfer->len % len;
+	u64 cfg = 0ULL;
 
 	loops = transfer->len / len;
 
 	if (transfer->tx_buf) {
-		idx = fsi_spi_sequence_add(seq,
-					   SPI_FSI_SEQUENCE_SHIFT_OUT(len));
+		val = SPI_FSI_SEQUENCE_SHIFT_OUT(len);
+		idx = fsi_spi_sequence_add(seq, val);
+
 		if (rem)
 			rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
 	} else if (transfer->rx_buf) {
-		idx = fsi_spi_sequence_add(seq,
-					   SPI_FSI_SEQUENCE_SHIFT_IN(len));
+		val = SPI_FSI_SEQUENCE_SHIFT_IN(len);
+		idx = fsi_spi_sequence_add(seq, val);
+
 		if (rem)
 			rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
 	} else {
 		return -EINVAL;
 	}
 
+	if (ctx->restricted) {
+		const int eidx = rem ? 5 : 6;
+
+		while (loops > 1 && idx <= eidx) {
+			idx = fsi_spi_sequence_add(seq, val);
+			loops--;
+			docfg = true;
+		}
+
+		if (loops > 1) {
+			dev_warn(ctx->dev, "No sequencer slots; aborting.\n");
+			return -EINVAL;
+		}
+	}
+
 	if (loops > 1) {
 		fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
+		docfg = true;
+	}
 
-		if (rem)
-			fsi_spi_sequence_add(seq, rem);
+	if (docfg) {
+		cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
+		if (transfer->rx_buf)
+			cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
+				SPI_FSI_COUNTER_CFG_N2_TX |
+				SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
+				SPI_FSI_COUNTER_CFG_N2_RELOAD;
 
-		rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG,
-				       SPI_FSI_COUNTER_CFG_LOOPS(loops - 1));
+		rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
 		if (rc)
 			return rc;
+	} else {
+		fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
 	}
 
+	if (rem)
+		fsi_spi_sequence_add(seq, rem);
+
 	return 0;
 }
 
@@ -275,6 +338,7 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
 {
 	int rc = 0;
 	u64 status = 0ULL;
+	u64 cfg = 0ULL;
 
 	if (transfer->tx_buf) {
 		int nb;
@@ -312,6 +376,16 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
 		u64 in = 0ULL;
 		u8 *rx = transfer->rx_buf;
 
+		rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
+		if (rc)
+			return rc;
+
+		if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
+			rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
+			if (rc)
+				return rc;
+		}
+
 		while (transfer->len > recv) {
 			do {
 				rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
@@ -350,7 +424,7 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
 	u64 status = 0ULL;
 	u64 wanted_clock_cfg = SPI_FSI_CLOCK_CFG_ECC_DISABLE |
 		SPI_FSI_CLOCK_CFG_SCK_NO_DEL |
-		FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 4);
+		FIELD_PREP(SPI_FSI_CLOCK_CFG_SCK_DIV, 19);
 
 	end = jiffies + msecs_to_jiffies(SPI_FSI_INIT_TIMEOUT_MS);
 	do {
@@ -396,18 +470,22 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
 static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
 					struct spi_message *mesg)
 {
-	int rc = 0;
+	int rc;
 	u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1);
 	struct spi_transfer *transfer;
 	struct fsi_spi *ctx = spi_controller_get_devdata(ctlr);
 
+	rc = fsi_spi_check_mux(ctx->fsi, ctx->dev);
+	if (rc)
+		return rc;
+
 	list_for_each_entry(transfer, &mesg->transfers, transfer_list) {
 		struct fsi_spi_sequence seq;
 		struct spi_transfer *next = NULL;
 
 		/* Sequencer must do shift out (tx) first. */
 		if (!transfer->tx_buf ||
-		    transfer->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+		    transfer->len > (ctx->max_xfr_size + 8)) {
 			rc = -EINVAL;
 			goto error;
 		}
@@ -431,7 +509,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
 
 			/* Sequencer can only do shift in (rx) after tx. */
 			if (next->rx_buf) {
-				if (next->len > SPI_FSI_MAX_TRANSFER_SIZE) {
+				if (next->len > ctx->max_xfr_size) {
 					rc = -EINVAL;
 					goto error;
 				}
@@ -476,30 +554,21 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
 
 static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
 {
-	return SPI_FSI_MAX_TRANSFER_SIZE;
+	struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller);
+
+	return ctx->max_xfr_size;
 }
 
 static int fsi_spi_probe(struct device *dev)
 {
 	int rc;
-	u32 root_ctrl_8;
 	struct device_node *np;
 	int num_controllers_registered = 0;
 	struct fsi_device *fsi = to_fsi_dev(dev);
 
-	/*
-	 * Check the SPI mux before attempting to probe. If the mux isn't set
-	 * then the SPI controllers can't access their slave devices.
-	 */
-	rc = fsi_slave_read(fsi->slave, FSI_MBOX_ROOT_CTRL_8, &root_ctrl_8,
-			    sizeof(root_ctrl_8));
+	rc = fsi_spi_check_mux(fsi, dev);
 	if (rc)
-		return rc;
-
-	if (!root_ctrl_8) {
-		dev_dbg(dev, "SPI mux not set, aborting probe.\n");
 		return -ENODEV;
-	}
 
 	for_each_available_child_of_node(dev->of_node, np) {
 		u32 base;
@@ -524,6 +593,14 @@ static int fsi_spi_probe(struct device *dev)
 		ctx->fsi = fsi;
 		ctx->base = base + SPI_FSI_BASE;
 
+		if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) {
+			ctx->restricted = true;
+			ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED;
+		} else {
+			ctx->restricted = false;
+			ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE;
+		}
+
 		rc = devm_spi_register_controller(dev, ctlr);
 		if (rc)
 			spi_controller_put(ctlr);

drivers/spi/spi-fsl-dspi.c

@@ -53,7 +53,6 @@
 
 #define SPI_SR				0x2c
 #define SPI_SR_TCFQF			BIT(31)
-#define SPI_SR_EOQF			BIT(28)
 #define SPI_SR_TFUF			BIT(27)
 #define SPI_SR_TFFF			BIT(25)
 #define SPI_SR_CMDTCF			BIT(23)
@@ -62,7 +61,7 @@
 #define SPI_SR_TFIWF			BIT(18)
 #define SPI_SR_RFDF			BIT(17)
 #define SPI_SR_CMDFFF			BIT(16)
-#define SPI_SR_CLEAR			(SPI_SR_TCFQF | SPI_SR_EOQF | \
+#define SPI_SR_CLEAR			(SPI_SR_TCFQF | \
 					SPI_SR_TFUF | SPI_SR_TFFF | \
 					SPI_SR_CMDTCF | SPI_SR_SPEF | \
 					SPI_SR_RFOF | SPI_SR_TFIWF | \
@@ -75,7 +74,6 @@
 
 #define SPI_RSER			0x30
 #define SPI_RSER_TCFQE			BIT(31)
-#define SPI_RSER_EOQFE			BIT(28)
 #define SPI_RSER_CMDTCFE		BIT(23)
 
 #define SPI_PUSHR			0x34
@@ -114,7 +112,6 @@ struct chip_data {
 };
 
 enum dspi_trans_mode {
-	DSPI_EOQ_MODE = 0,
 	DSPI_XSPI_MODE,
 	DSPI_DMA_MODE,
 };
@@ -189,7 +186,7 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
 		.fifo_size		= 4,
 	},
 	[MCF5441X] = {
-		.trans_mode		= DSPI_EOQ_MODE,
+		.trans_mode		= DSPI_DMA_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 16,
 	},
@@ -671,11 +668,6 @@ static void ns_delay_scale(char *psc, char *sc, int delay_ns,
 	}
 }
 
-static void dspi_pushr_write(struct fsl_dspi *dspi)
-{
-	regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi));
-}
-
 static void dspi_pushr_cmd_write(struct fsl_dspi *dspi, u16 cmd)
 {
 	/*
@@ -735,21 +727,6 @@ static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words)
 	}
 }
 
-static void dspi_eoq_fifo_write(struct fsl_dspi *dspi, int num_words)
-{
-	u16 xfer_cmd = dspi->tx_cmd;
-
-	/* Fill TX FIFO with as many transfers as possible */
-	while (num_words--) {
-		dspi->tx_cmd = xfer_cmd;
-		/* Request EOQF for last transfer in FIFO */
-		if (num_words == 0)
-			dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
-		/* Write combined TX FIFO and CMD FIFO entry */
-		dspi_pushr_write(dspi);
-	}
-}
-
 static u32 dspi_popr_read(struct fsl_dspi *dspi)
 {
 	u32 rxdata = 0;
@@ -818,7 +795,7 @@ static void dspi_setup_accel(struct fsl_dspi *dspi)
 	dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8);
 
 	/*
-	 * Update CTAR here (code is common for EOQ, XSPI and DMA modes).
+	 * Update CTAR here (code is common for XSPI and DMA modes).
 	 * We will update CTARE in the portion specific to XSPI, when we
 	 * also know the preload value (DTCP).
 	 */
@@ -862,10 +839,7 @@ static void dspi_fifo_write(struct fsl_dspi *dspi)
 
 	spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq);
 
-	if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
-		dspi_eoq_fifo_write(dspi, num_words);
-	else
-		dspi_xspi_fifo_write(dspi, num_words);
+	dspi_xspi_fifo_write(dspi, num_words);
 	/*
 	 * Everything after this point is in a potential race with the next
 	 * interrupt, so we must never use dspi->words_in_flight again since it
@@ -898,7 +872,7 @@ static int dspi_poll(struct fsl_dspi *dspi)
 		regmap_read(dspi->regmap, SPI_SR, &spi_sr);
 		regmap_write(dspi->regmap, SPI_SR, spi_sr);
 
-		if (spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF))
+		if (spi_sr & SPI_SR_CMDTCF)
 			break;
 	} while (--tries);
 
@@ -916,7 +890,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
 	regmap_read(dspi->regmap, SPI_SR, &spi_sr);
 	regmap_write(dspi->regmap, SPI_SR, spi_sr);
 
-	if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF)))
+	if (!(spi_sr & SPI_SR_CMDTCF))
 		return IRQ_NONE;
 
 	if (dspi_rxtx(dspi) == 0)
@@ -1204,9 +1178,6 @@ static int dspi_init(struct fsl_dspi *dspi)
 	regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
 
 	switch (dspi->devtype_data->trans_mode) {
-	case DSPI_EOQ_MODE:
-		regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
-		break;
 	case DSPI_XSPI_MODE:
 		regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
 		break;
@@ -1245,22 +1216,6 @@ static int dspi_slave_abort(struct spi_master *master)
 	return 0;
 }
 
-/*
- * EOQ mode will inevitably deassert its PCS signal on last word in a queue
- * (hardware limitation), so we need to inform the spi_device that larger
- * buffers than the FIFO size are going to have the chip select randomly
- * toggling, so it has a chance to adapt its message sizes.
- */
-static size_t dspi_max_message_size(struct spi_device *spi)
-{
-	struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
-
-	if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
-		return dspi->devtype_data->fifo_size;
-
-	return SIZE_MAX;
-}
-
 static int dspi_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1289,7 +1244,6 @@ static int dspi_probe(struct platform_device *pdev)
 
 	ctlr->setup = dspi_setup;
 	ctlr->transfer_one_message = dspi_transfer_one_message;
-	ctlr->max_message_size = dspi_max_message_size;
 	ctlr->dev.of_node = pdev->dev.of_node;
 
 	ctlr->cleanup = dspi_cleanup;

drivers/spi/spi-fsl-espi.c

@@ -731,7 +731,7 @@ static int fsl_espi_probe(struct device *dev, struct resource *mem,
 	if (ret < 0)
 		goto err_pm;
 
-	dev_info(dev, "at 0x%p (irq = %u)\n", espi->reg_base, irq);
+	dev_info(dev, "irq = %u\n", irq);
 
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);

drivers/spi/spi-fsl-lpspi.c

@@ -944,8 +944,7 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int fsl_lpspi_suspend(struct device *dev)
+static int __maybe_unused fsl_lpspi_suspend(struct device *dev)
 {
 	int ret;
 
@@ -954,7 +953,7 @@ static int fsl_lpspi_suspend(struct device *dev)
 	return ret;
 }
 
-static int fsl_lpspi_resume(struct device *dev)
+static int __maybe_unused fsl_lpspi_resume(struct device *dev)
 {
 	int ret;
 
@@ -968,7 +967,6 @@ static int fsl_lpspi_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops fsl_lpspi_pm_ops = {
 	SET_RUNTIME_PM_OPS(fsl_lpspi_runtime_suspend,

drivers/spi/spi-geni-qcom.c

@@ -290,6 +290,7 @@ static int spi_geni_init(struct spi_geni_master *mas)
 {
 	struct geni_se *se = &mas->se;
 	unsigned int proto, major, minor, ver;
+	u32 spi_tx_cfg;
 
 	pm_runtime_get_sync(mas->dev);
 
@@ -308,7 +309,7 @@ static int spi_geni_init(struct spi_geni_master *mas)
 	 * Hardware programming guide suggests to configure
 	 * RX FIFO RFR level to fifo_depth-2.
 	 */
-	geni_se_init(se, mas->tx_fifo_depth / 2, mas->tx_fifo_depth - 2);
+	geni_se_init(se, mas->tx_fifo_depth - 3, mas->tx_fifo_depth - 2);
 	/* Transmit an entire FIFO worth of data per IRQ */
 	mas->tx_wm = 1;
 	ver = geni_se_get_qup_hw_version(se);
@@ -322,16 +323,103 @@ static int spi_geni_init(struct spi_geni_master *mas)
 
 	geni_se_select_mode(se, GENI_SE_FIFO);
 
+	/* We always control CS manually */
+	spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
+	spi_tx_cfg &= ~CS_TOGGLE;
+	writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+
 	pm_runtime_put(mas->dev);
 	return 0;
 }
 
+static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
+{
+	/*
+	 * Calculate how many bytes we'll put in each FIFO word.  If the
+	 * transfer words don't pack cleanly into a FIFO word we'll just put
+	 * one transfer word in each FIFO word.  If they do pack we'll pack 'em.
+	 */
+	if (mas->fifo_width_bits % mas->cur_bits_per_word)
+		return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
+						       BITS_PER_BYTE));
+
+	return mas->fifo_width_bits / BITS_PER_BYTE;
+}
+
+static bool geni_spi_handle_tx(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	unsigned int max_bytes;
+	const u8 *tx_buf;
+	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+	unsigned int i = 0;
+
+	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
+	if (mas->tx_rem_bytes < max_bytes)
+		max_bytes = mas->tx_rem_bytes;
+
+	tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
+	while (i < max_bytes) {
+		unsigned int j;
+		unsigned int bytes_to_write;
+		u32 fifo_word = 0;
+		u8 *fifo_byte = (u8 *)&fifo_word;
+
+		bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
+		for (j = 0; j < bytes_to_write; j++)
+			fifo_byte[j] = tx_buf[i++];
+		iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
+	}
+	mas->tx_rem_bytes -= max_bytes;
+	if (!mas->tx_rem_bytes) {
+		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+		return false;
+	}
+	return true;
+}
+
+static void geni_spi_handle_rx(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	u32 rx_fifo_status;
+	unsigned int rx_bytes;
+	unsigned int rx_last_byte_valid;
+	u8 *rx_buf;
+	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+	unsigned int i = 0;
+
+	rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
+	rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
+	if (rx_fifo_status & RX_LAST) {
+		rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
+		rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
+		if (rx_last_byte_valid && rx_last_byte_valid < 4)
+			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
+	}
+	if (mas->rx_rem_bytes < rx_bytes)
+		rx_bytes = mas->rx_rem_bytes;
+
+	rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
+	while (i < rx_bytes) {
+		u32 fifo_word = 0;
+		u8 *fifo_byte = (u8 *)&fifo_word;
+		unsigned int bytes_to_read;
+		unsigned int j;
+
+		bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
+		ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
+		for (j = 0; j < bytes_to_read; j++)
+			rx_buf[i++] = fifo_byte[j];
+	}
+	mas->rx_rem_bytes -= rx_bytes;
+}
+
 static void setup_fifo_xfer(struct spi_transfer *xfer,
 				struct spi_geni_master *mas,
 				u16 mode, struct spi_master *spi)
 {
 	u32 m_cmd = 0;
-	u32 spi_tx_cfg, len;
+	u32 len;
 	struct geni_se *se = &mas->se;
 	int ret;
 
@@ -350,7 +438,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
 	spin_lock_irq(&mas->lock);
 	spin_unlock_irq(&mas->lock);
 
-	spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
 	if (xfer->bits_per_word != mas->cur_bits_per_word) {
 		spi_setup_word_len(mas, mode, xfer->bits_per_word);
 		mas->cur_bits_per_word = xfer->bits_per_word;
@@ -364,8 +451,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
 	mas->tx_rem_bytes = 0;
 	mas->rx_rem_bytes = 0;
 
-	spi_tx_cfg &= ~CS_TOGGLE;
-
 	if (!(mas->cur_bits_per_word % MIN_WORD_LEN))
 		len = xfer->len * BITS_PER_BYTE / mas->cur_bits_per_word;
 	else
@@ -384,7 +469,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
 		writel(len, se->base + SE_SPI_RX_TRANS_LEN);
 		mas->rx_rem_bytes = xfer->len;
 	}
-	writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
 
 	/*
 	 * Lock around right before we start the transfer since our
@@ -398,8 +482,10 @@ static void setup_fifo_xfer(struct spi_transfer *xfer,
 	 * setting up GENI SE engine, as driver starts data transfer
 	 * for the watermark interrupt.
 	 */
-	if (m_cmd & SPI_TX_ONLY)
-		writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
+	if (m_cmd & SPI_TX_ONLY) {
+		if (geni_spi_handle_tx(mas))
+			writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
+	}
 	spin_unlock_irq(&mas->lock);
 }
 
@@ -417,85 +503,6 @@ static int spi_geni_transfer_one(struct spi_master *spi,
 	return 1;
 }
 
-static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
-{
-	/*
-	 * Calculate how many bytes we'll put in each FIFO word.  If the
-	 * transfer words don't pack cleanly into a FIFO word we'll just put
-	 * one transfer word in each FIFO word.  If they do pack we'll pack 'em.
-	 */
-	if (mas->fifo_width_bits % mas->cur_bits_per_word)
-		return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
-						       BITS_PER_BYTE));
-
-	return mas->fifo_width_bits / BITS_PER_BYTE;
-}
-
-static void geni_spi_handle_tx(struct spi_geni_master *mas)
-{
-	struct geni_se *se = &mas->se;
-	unsigned int max_bytes;
-	const u8 *tx_buf;
-	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
-	unsigned int i = 0;
-
-	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
-	if (mas->tx_rem_bytes < max_bytes)
-		max_bytes = mas->tx_rem_bytes;
-
-	tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
-	while (i < max_bytes) {
-		unsigned int j;
-		unsigned int bytes_to_write;
-		u32 fifo_word = 0;
-		u8 *fifo_byte = (u8 *)&fifo_word;
-
-		bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
-		for (j = 0; j < bytes_to_write; j++)
-			fifo_byte[j] = tx_buf[i++];
-		iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
-	}
-	mas->tx_rem_bytes -= max_bytes;
-	if (!mas->tx_rem_bytes)
-		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
-}
-
-static void geni_spi_handle_rx(struct spi_geni_master *mas)
-{
-	struct geni_se *se = &mas->se;
-	u32 rx_fifo_status;
-	unsigned int rx_bytes;
-	unsigned int rx_last_byte_valid;
-	u8 *rx_buf;
-	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
-	unsigned int i = 0;
-
-	rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
-	rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
-	if (rx_fifo_status & RX_LAST) {
-		rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
-		rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
-		if (rx_last_byte_valid && rx_last_byte_valid < 4)
-			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
-	}
-	if (mas->rx_rem_bytes < rx_bytes)
-		rx_bytes = mas->rx_rem_bytes;
-
-	rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
-	while (i < rx_bytes) {
-		u32 fifo_word = 0;
-		u8 *fifo_byte = (u8 *)&fifo_word;
-		unsigned int bytes_to_read;
-		unsigned int j;
-
-		bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
-		ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
-		for (j = 0; j < bytes_to_read; j++)
-			rx_buf[i++] = fifo_byte[j];
-	}
-	mas->rx_rem_bytes -= rx_bytes;
-}
-
 static irqreturn_t geni_spi_isr(int irq, void *data)
 {
 	struct spi_master *spi = data;
@@ -613,11 +620,9 @@ static int spi_geni_probe(struct platform_device *pdev)
 		return PTR_ERR(mas->se.opp_table);
 	/* OPP table is optional */
 	ret = dev_pm_opp_of_add_table(&pdev->dev);
-	if (!ret) {
-		mas->se.has_opp_table = true;
-	} else if (ret != -ENODEV) {
+	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		return ret;
+		goto put_clkname;
 	}
 
 	spi->bus_num = -1;
@@ -669,8 +674,8 @@ static int spi_geni_probe(struct platform_device *pdev)
 spi_geni_probe_runtime_disable:
 	pm_runtime_disable(dev);
 	spi_master_put(spi);
-	if (mas->se.has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+put_clkname:
 	dev_pm_opp_put_clkname(mas->se.opp_table);
 	return ret;
 }
@@ -685,8 +690,7 @@ static int spi_geni_remove(struct platform_device *pdev)
 
 	free_irq(mas->irq, spi);
 	pm_runtime_disable(&pdev->dev);
-	if (mas->se.has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
 	dev_pm_opp_put_clkname(mas->se.opp_table);
 	return 0;
 }

drivers/spi/spi-imx.c

@@ -1503,6 +1503,8 @@ static int spi_imx_transfer(struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
+	transfer->effective_speed_hz = spi_imx->spi_bus_clk;
+
 	/* flush rxfifo before transfer */
 	while (spi_imx->devtype_data->rx_available(spi_imx))
 		readl(spi_imx->base + MXC_CSPIRXDATA);
@@ -1695,7 +1697,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 			goto out_runtime_pm_put;
 
 		if (ret < 0)
-			dev_err(&pdev->dev, "dma setup error %d, use pio\n",
+			dev_dbg(&pdev->dev, "dma setup error %d, use pio\n",
 				ret);
 	}
 
@@ -1707,16 +1709,17 @@ static int spi_imx_probe(struct platform_device *pdev)
 	ret = spi_bitbang_start(&spi_imx->bitbang);
 	if (ret) {
 		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
-		goto out_runtime_pm_put;
+		goto out_bitbang_start;
 	}
 
-	dev_info(&pdev->dev, "probed\n");
-
 	pm_runtime_mark_last_busy(spi_imx->dev);
 	pm_runtime_put_autosuspend(spi_imx->dev);
 
 	return ret;
 
+out_bitbang_start:
+	if (spi_imx->devtype_data->has_dmamode)
+		spi_imx_sdma_exit(spi_imx);
 out_runtime_pm_put:
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
 	pm_runtime_put_sync(spi_imx->dev);

drivers/spi/spi-lantiq-ssc.c

@@ -625,9 +625,8 @@ static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
 	struct lantiq_ssc_spi *spi = data;
 	const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
 	u32 val = lantiq_ssc_readl(spi, hwcfg->irncr);
-	unsigned long flags;
 
-	spin_lock_irqsave(&spi->lock, flags);
+	spin_lock(&spi->lock);
 	if (hwcfg->irq_ack)
 		lantiq_ssc_writel(spi, val, hwcfg->irncr);
 
@@ -652,12 +651,12 @@ static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
 		}
 	}
 
-	spin_unlock_irqrestore(&spi->lock, flags);
+	spin_unlock(&spi->lock);
 	return IRQ_HANDLED;
 
 completed:
 	queue_work(spi->wq, &spi->work);
-	spin_unlock_irqrestore(&spi->lock, flags);
+	spin_unlock(&spi->lock);
 
 	return IRQ_HANDLED;
 }
@@ -668,12 +667,11 @@ static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
 	const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
 	u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
 	u32 val = lantiq_ssc_readl(spi, hwcfg->irncr);
-	unsigned long flags;
 
 	if (!(stat & LTQ_SPI_STAT_ERRORS))
 		return IRQ_NONE;
 
-	spin_lock_irqsave(&spi->lock, flags);
+	spin_lock(&spi->lock);
 	if (hwcfg->irq_ack)
 		lantiq_ssc_writel(spi, val, hwcfg->irncr);
 
@@ -697,7 +695,7 @@ static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
 	if (spi->master->cur_msg)
 		spi->master->cur_msg->status = -EIO;
 	queue_work(spi->wq, &spi->work);
-	spin_unlock_irqrestore(&spi->lock, flags);
+	spin_unlock(&spi->lock);
 
 	return IRQ_HANDLED;
 }

drivers/spi/spi-mux.c

@@ -139,9 +139,8 @@ static int spi_mux_probe(struct spi_device *spi)
 
 	priv->mux = devm_mux_control_get(&spi->dev, NULL);
 	if (IS_ERR(priv->mux)) {
-		ret = PTR_ERR(priv->mux);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&spi->dev, "failed to get control-mux\n");
+		ret = dev_err_probe(&spi->dev, PTR_ERR(priv->mux),
+				    "failed to get control-mux\n");
 		goto err_put_ctlr;
 	}
 

drivers/spi/spi-npcm-fiu.c

@@ -677,7 +677,6 @@ static int npcm_fiu_probe(struct platform_device *pdev)
 	struct npcm_fiu_spi *fiu;
 	void __iomem *regbase;
 	struct resource *res;
-	int ret;
 	int id;
 
 	ctrl = spi_alloc_master(dev, sizeof(*fiu));
@@ -736,11 +735,7 @@ static int npcm_fiu_probe(struct platform_device *pdev)
 	ctrl->num_chipselect = fiu->info->max_cs;
 	ctrl->dev.of_node = dev->of_node;
 
-	ret = devm_spi_register_master(dev, ctrl);
-	if (ret)
-		return ret;
-
-	return 0;
+	return devm_spi_register_master(dev, ctrl);
 }
 
 static int npcm_fiu_remove(struct platform_device *pdev)

drivers/spi/spi-nxp-fspi.c

@@ -3,7 +3,8 @@
 /*
  * NXP FlexSPI(FSPI) controller driver.
  *
- * Copyright 2019 NXP.
+ * Copyright 2019-2020 NXP
+ * Copyright 2020 Puresoftware Ltd.
  *
  * FlexSPI is a flexsible SPI host controller which supports two SPI
  * channels and up to 4 external devices. Each channel supports
@@ -30,6 +31,7 @@
  *     Frieder Schrempf <frieder.schrempf@kontron.de>
  */
 
+#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
@@ -563,6 +565,9 @@ static int nxp_fspi_clk_prep_enable(struct nxp_fspi *f)
 {
 	int ret;
 
+	if (is_acpi_node(f->dev->fwnode))
+		return 0;
+
 	ret = clk_prepare_enable(f->clk_en);
 	if (ret)
 		return ret;
@@ -576,10 +581,15 @@ static int nxp_fspi_clk_prep_enable(struct nxp_fspi *f)
 	return 0;
 }
 
-static void nxp_fspi_clk_disable_unprep(struct nxp_fspi *f)
+static int nxp_fspi_clk_disable_unprep(struct nxp_fspi *f)
 {
+	if (is_acpi_node(f->dev->fwnode))
+		return 0;
+
 	clk_disable_unprepare(f->clk);
 	clk_disable_unprepare(f->clk_en);
+
+	return 0;
 }
 
 /*
@@ -1001,7 +1011,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 
 	f = spi_controller_get_devdata(ctlr);
 	f->dev = dev;
-	f->devtype_data = of_device_get_match_data(dev);
+	f->devtype_data = device_get_match_data(dev);
 	if (!f->devtype_data) {
 		ret = -ENODEV;
 		goto err_put_ctrl;
@@ -1010,7 +1020,12 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, f);
 
 	/* find the resources - configuration register address space */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fspi_base");
+	if (is_acpi_node(f->dev->fwnode))
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	else
+		res = platform_get_resource_byname(pdev,
+				IORESOURCE_MEM, "fspi_base");
+
 	f->iobase = devm_ioremap_resource(dev, res);
 	if (IS_ERR(f->iobase)) {
 		ret = PTR_ERR(f->iobase);
@@ -1018,7 +1033,12 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	}
 
 	/* find the resources - controller memory mapped space */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fspi_mmap");
+	if (is_acpi_node(f->dev->fwnode))
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	else
+		res = platform_get_resource_byname(pdev,
+				IORESOURCE_MEM, "fspi_mmap");
+
 	if (!res) {
 		ret = -ENODEV;
 		goto err_put_ctrl;
@@ -1029,22 +1049,24 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	f->memmap_phy_size = resource_size(res);
 
 	/* find the clocks */
-	f->clk_en = devm_clk_get(dev, "fspi_en");
-	if (IS_ERR(f->clk_en)) {
-		ret = PTR_ERR(f->clk_en);
-		goto err_put_ctrl;
-	}
+	if (dev_of_node(&pdev->dev)) {
+		f->clk_en = devm_clk_get(dev, "fspi_en");
+		if (IS_ERR(f->clk_en)) {
+			ret = PTR_ERR(f->clk_en);
+			goto err_put_ctrl;
+		}
 
-	f->clk = devm_clk_get(dev, "fspi");
-	if (IS_ERR(f->clk)) {
-		ret = PTR_ERR(f->clk);
-		goto err_put_ctrl;
-	}
+		f->clk = devm_clk_get(dev, "fspi");
+		if (IS_ERR(f->clk)) {
+			ret = PTR_ERR(f->clk);
+			goto err_put_ctrl;
+		}
 
-	ret = nxp_fspi_clk_prep_enable(f);
-	if (ret) {
-		dev_err(dev, "can not enable the clock\n");
-		goto err_put_ctrl;
+		ret = nxp_fspi_clk_prep_enable(f);
+		if (ret) {
+			dev_err(dev, "can not enable the clock\n");
+			goto err_put_ctrl;
+		}
 	}
 
 	/* find the irq */
@@ -1127,6 +1149,14 @@ static const struct of_device_id nxp_fspi_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id nxp_fspi_acpi_ids[] = {
+	{ "NXP0009", .driver_data = (kernel_ulong_t)&lx2160a_data, },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, nxp_fspi_acpi_ids);
+#endif
+
 static const struct dev_pm_ops nxp_fspi_pm_ops = {
 	.suspend	= nxp_fspi_suspend,
 	.resume		= nxp_fspi_resume,
@@ -1136,6 +1166,7 @@ static struct platform_driver nxp_fspi_driver = {
 	.driver = {
 		.name	= "nxp-fspi",
 		.of_match_table = nxp_fspi_dt_ids,
+		.acpi_match_table = ACPI_PTR(nxp_fspi_acpi_ids),
 		.pm =   &nxp_fspi_pm_ops,
 	},
 	.probe          = nxp_fspi_probe,

drivers/spi/spi-omap2-mcspi.c

@@ -24,7 +24,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/gcd.h>
-#include <linux/iopoll.h>
 
 #include <linux/spi/spi.h>
 
@@ -348,9 +347,19 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 
 static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
 {
-	u32 val;
-
-	return readl_poll_timeout(reg, val, val & bit, 1, MSEC_PER_SEC);
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (!(readl_relaxed(reg) & bit)) {
+		if (time_after(jiffies, timeout)) {
+			if (!(readl_relaxed(reg) & bit))
+				return -ETIMEDOUT;
+			else
+				return 0;
+		}
+		cpu_relax();
+	}
+	return 0;
 }
 
 static int mcspi_wait_for_completion(struct  omap2_mcspi *mcspi,

drivers/spi/spi-qcom-qspi.c

@@ -143,7 +143,6 @@ struct qcom_qspi {
 	struct qspi_xfer xfer;
 	struct icc_path *icc_path_cpu_to_qspi;
 	struct opp_table *opp_table;
-	bool has_opp_table;
 	unsigned long last_speed;
 	/* Lock to protect data accessed by IRQs */
 	spinlock_t lock;
@@ -421,9 +420,8 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
 	u32 int_status;
 	struct qcom_qspi *ctrl = dev_id;
 	irqreturn_t ret = IRQ_NONE;
-	unsigned long flags;
 
-	spin_lock_irqsave(&ctrl->lock, flags);
+	spin_lock(&ctrl->lock);
 
 	int_status = readl(ctrl->base + MSTR_INT_STATUS);
 	writel(int_status, ctrl->base + MSTR_INT_STATUS);
@@ -451,7 +449,7 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
 		spi_finalize_current_transfer(dev_get_drvdata(ctrl->dev));
 	}
 
-	spin_unlock_irqrestore(&ctrl->lock, flags);
+	spin_unlock(&ctrl->lock);
 	return ret;
 }
 
@@ -495,9 +493,8 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 
 	ctrl->icc_path_cpu_to_qspi = devm_of_icc_get(dev, "qspi-config");
 	if (IS_ERR(ctrl->icc_path_cpu_to_qspi)) {
-		ret = PTR_ERR(ctrl->icc_path_cpu_to_qspi);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get cpu path: %d\n", ret);
+		ret = dev_err_probe(dev, PTR_ERR(ctrl->icc_path_cpu_to_qspi),
+				    "Failed to get cpu path\n");
 		goto exit_probe_master_put;
 	}
 	/* Set BW vote for register access */
@@ -546,11 +543,9 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 	}
 	/* OPP table is optional */
 	ret = dev_pm_opp_of_add_table(&pdev->dev);
-	if (!ret) {
-		ctrl->has_opp_table = true;
-	} else if (ret != -ENODEV) {
+	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		goto exit_probe_master_put;
+		goto exit_probe_put_clkname;
 	}
 
 	pm_runtime_use_autosuspend(dev);
@@ -562,8 +557,9 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 		return 0;
 
 	pm_runtime_disable(dev);
-	if (ctrl->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+
+exit_probe_put_clkname:
 	dev_pm_opp_put_clkname(ctrl->opp_table);
 
 exit_probe_master_put:
@@ -581,8 +577,7 @@ static int qcom_qspi_remove(struct platform_device *pdev)
 	spi_unregister_master(master);
 
 	pm_runtime_disable(&pdev->dev);
-	if (ctrl->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
 	dev_pm_opp_put_clkname(ctrl->opp_table);
 
 	return 0;

drivers/spi/spi-qup.c

@@ -848,7 +848,7 @@ static int spi_qup_transfer_one(struct spi_master *master,
 {
 	struct spi_qup *controller = spi_master_get_devdata(master);
 	unsigned long timeout, flags;
-	int ret = -EIO;
+	int ret;
 
 	ret = spi_qup_io_prep(spi, xfer);
 	if (ret)

drivers/spi/spi-rspi.c

@@ -161,6 +161,7 @@
 #define SPCMD_SPRW		0x0010	/* SPI Read/Write Access (Dual/Quad) */
 #define SPCMD_SSLA(i)		((i) << 4)	/* SSL Assert Signal Setting */
 #define SPCMD_BRDV_MASK		0x000c	/* Bit Rate Division Setting */
+#define SPCMD_BRDV(brdv)	((brdv) << 2)
 #define SPCMD_CPOL		0x0002	/* Clock Polarity Setting */
 #define SPCMD_CPHA		0x0001	/* Clock Phase Setting */
 
@@ -242,24 +243,40 @@ struct spi_ops {
 	int (*transfer_one)(struct spi_controller *ctlr,
 			    struct spi_device *spi, struct spi_transfer *xfer);
 	u16 extra_mode_bits;
+	u16 min_div;
+	u16 max_div;
 	u16 flags;
 	u16 fifo_size;
 	u8 num_hw_ss;
 };
 
+static void rspi_set_rate(struct rspi_data *rspi)
+{
+	unsigned long clksrc;
+	int brdv = 0, spbr;
+
+	clksrc = clk_get_rate(rspi->clk);
+	spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
+	while (spbr > 255 && brdv < 3) {
+		brdv++;
+		spbr = DIV_ROUND_UP(spbr + 1, 2) - 1;
+	}
+
+	rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+	rspi->spcmd |= SPCMD_BRDV(brdv);
+	rspi->speed_hz = DIV_ROUND_UP(clksrc, (2U << brdv) * (spbr + 1));
+}
+
 /*
  * functions for RSPI on legacy SH
  */
 static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
 {
-	int spbr;
-
 	/* Sets output mode, MOSI signal, and (optionally) loopback */
 	rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
 
 	/* Sets transfer bit rate */
-	spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz) - 1;
-	rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+	rspi_set_rate(rspi);
 
 	/* Disable dummy transmission, set 16-bit word access, 1 frame */
 	rspi_write8(rspi, 0, RSPI_SPDCR);
@@ -289,25 +306,11 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
  */
 static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
 {
-	int spbr;
-	int div = 0;
-	unsigned long clksrc;
-
 	/* Sets output mode, MOSI signal, and (optionally) loopback */
 	rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
 
-	clksrc = clk_get_rate(rspi->clk);
-	while (div < 3) {
-		if (rspi->speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
-			break;
-		div++;
-		clksrc /= 2;
-	}
-
 	/* Sets transfer bit rate */
-	spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
-	rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
-	rspi->spcmd |= div << 2;
+	rspi_set_rate(rspi);
 
 	/* Disable dummy transmission, set byte access */
 	rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);
@@ -334,14 +337,28 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
  */
 static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
 {
-	int spbr;
+	unsigned long clksrc;
+	int brdv = 0, spbr;
 
 	/* Sets output mode, MOSI signal, and (optionally) loopback */
 	rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
 
 	/* Sets transfer bit rate */
-	spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->speed_hz);
-	rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+	clksrc = clk_get_rate(rspi->clk);
+	if (rspi->speed_hz >= clksrc) {
+		spbr = 0;
+		rspi->speed_hz = clksrc;
+	} else {
+		spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz);
+		while (spbr > 255 && brdv < 3) {
+			brdv++;
+			spbr = DIV_ROUND_UP(spbr, 2);
+		}
+		spbr = clamp(spbr, 0, 255);
+		rspi->speed_hz = DIV_ROUND_UP(clksrc, (2U << brdv) * spbr);
+	}
+	rspi_write8(rspi, spbr, RSPI_SPBR);
+	rspi->spcmd |= SPCMD_BRDV(brdv);
 
 	/* Disable dummy transmission, set byte access */
 	rspi_write8(rspi, 0, RSPI_SPDCR);
@@ -686,6 +703,8 @@ static int rspi_common_transfer(struct rspi_data *rspi,
 {
 	int ret;
 
+	xfer->effective_speed_hz = rspi->speed_hz;
+
 	ret = rspi_dma_check_then_transfer(rspi, xfer);
 	if (ret != -EAGAIN)
 		return ret;
@@ -841,6 +860,7 @@ static int qspi_transfer_one(struct spi_controller *ctlr,
 {
 	struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
 
+	xfer->effective_speed_hz = rspi->speed_hz;
 	if (spi->mode & SPI_LOOP) {
 		return qspi_transfer_out_in(rspi, xfer);
 	} else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
@@ -1163,6 +1183,8 @@ static int rspi_remove(struct platform_device *pdev)
 static const struct spi_ops rspi_ops = {
 	.set_config_register =	rspi_set_config_register,
 	.transfer_one =		rspi_transfer_one,
+	.min_div =		2,
+	.max_div =		4096,
 	.flags =		SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		8,
 	.num_hw_ss =		2,
@@ -1171,6 +1193,8 @@ static const struct spi_ops rspi_ops = {
 static const struct spi_ops rspi_rz_ops = {
 	.set_config_register =	rspi_rz_set_config_register,
 	.transfer_one =		rspi_rz_transfer_one,
+	.min_div =		2,
+	.max_div =		4096,
 	.flags =		SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		8,	/* 8 for TX, 32 for RX */
 	.num_hw_ss =		1,
@@ -1181,6 +1205,8 @@ static const struct spi_ops qspi_ops = {
 	.transfer_one =		qspi_transfer_one,
 	.extra_mode_bits =	SPI_TX_DUAL | SPI_TX_QUAD |
 				SPI_RX_DUAL | SPI_RX_QUAD,
+	.min_div =		1,
+	.max_div =		4080,
 	.flags =		SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		32,
 	.num_hw_ss =		1,
@@ -1242,6 +1268,7 @@ static int rspi_probe(struct platform_device *pdev)
 	int ret;
 	const struct rspi_plat_data *rspi_pd;
 	const struct spi_ops *ops;
+	unsigned long clksrc;
 
 	ctlr = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
 	if (ctlr == NULL)
@@ -1261,13 +1288,6 @@ static int rspi_probe(struct platform_device *pdev)
 			ctlr->num_chipselect = 2; /* default */
 	}
 
-	/* ops parameter check */
-	if (!ops->set_config_register) {
-		dev_err(&pdev->dev, "there is no set_config_register\n");
-		ret = -ENODEV;
-		goto error1;
-	}
-
 	rspi = spi_controller_get_devdata(ctlr);
 	platform_set_drvdata(pdev, rspi);
 	rspi->ops = ops;
@@ -1301,6 +1321,9 @@ static int rspi_probe(struct platform_device *pdev)
 	ctlr->unprepare_message = rspi_unprepare_message;
 	ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
 			  SPI_LOOP | ops->extra_mode_bits;
+	clksrc = clk_get_rate(rspi->clk);
+	ctlr->min_speed_hz = DIV_ROUND_UP(clksrc, ops->max_div);
+	ctlr->max_speed_hz = DIV_ROUND_UP(clksrc, ops->min_div);
 	ctlr->flags = ops->flags;
 	ctlr->dev.of_node = pdev->dev.of_node;
 	ctlr->use_gpio_descriptors = true;

drivers/spi/spi-s3c24xx.c

@@ -28,7 +28,7 @@
 #include "spi-s3c24xx-fiq.h"
 
 /**
- * s3c24xx_spi_devstate - per device data
+ * struct s3c24xx_spi_devstate - per device data
  * @hz: Last frequency calculated for @sppre field.
  * @mode: Last mode setting for the @spcon field.
  * @spcon: Value to write to the SPCON register.

drivers/spi/spi-sprd-adi.c

@@ -504,10 +504,7 @@ static int sprd_adi_probe(struct platform_device *pdev)
 			dev_info(&pdev->dev, "no hardware spinlock supplied\n");
 			break;
 		default:
-			dev_err(&pdev->dev,
-				"failed to find hwlock id, %d\n", ret);
-			fallthrough;
-		case -EPROBE_DEFER:
+			dev_err_probe(&pdev->dev, ret, "failed to find hwlock id\n");
 			goto put_ctlr;
 		}
 	}

drivers/spi/spi-sprd.c

@@ -553,22 +553,15 @@ static int sprd_spi_dma_tx_config(struct sprd_spi *ss, struct spi_transfer *t)
 static int sprd_spi_dma_request(struct sprd_spi *ss)
 {
 	ss->dma.dma_chan[SPRD_SPI_RX] = dma_request_chan(ss->dev, "rx_chn");
-	if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_RX])) {
-		if (PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]) == -EPROBE_DEFER)
-			return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]);
-
-		dev_err(ss->dev, "request RX DMA channel failed!\n");
-		return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]);
-	}
+	if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_RX]))
+		return dev_err_probe(ss->dev, PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]),
+				     "request RX DMA channel failed!\n");
 
 	ss->dma.dma_chan[SPRD_SPI_TX]  = dma_request_chan(ss->dev, "tx_chn");
 	if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_TX])) {
-		if (PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]) == -EPROBE_DEFER)
-			return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]);
-
-		dev_err(ss->dev, "request TX DMA channel failed!\n");
 		dma_release_channel(ss->dma.dma_chan[SPRD_SPI_RX]);
-		return PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]);
+		return dev_err_probe(ss->dev, PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]),
+				     "request TX DMA channel failed!\n");
 	}
 
 	return 0;

drivers/spi/spi-stm32.c

@@ -804,10 +804,9 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
 	struct spi_master *master = dev_id;
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 	u32 sr, mask = 0;
-	unsigned long flags;
 	bool end = false;
 
-	spin_lock_irqsave(&spi->lock, flags);
+	spin_lock(&spi->lock);
 
 	sr = readl_relaxed(spi->base + STM32F4_SPI_SR);
 	/*
@@ -833,7 +832,7 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
 
 	if (!(sr & mask)) {
 		dev_dbg(spi->dev, "spurious IT (sr=0x%08x)\n", sr);
-		spin_unlock_irqrestore(&spi->lock, flags);
+		spin_unlock(&spi->lock);
 		return IRQ_NONE;
 	}
 
@@ -875,11 +874,11 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
 					STM32F4_SPI_CR2_TXEIE |
 					STM32F4_SPI_CR2_RXNEIE |
 					STM32F4_SPI_CR2_ERRIE);
-		spin_unlock_irqrestore(&spi->lock, flags);
+		spin_unlock(&spi->lock);
 		return IRQ_WAKE_THREAD;
 	}
 
-	spin_unlock_irqrestore(&spi->lock, flags);
+	spin_unlock(&spi->lock);
 	return IRQ_HANDLED;
 }
 
@@ -1861,9 +1860,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 
 	spi->irq = platform_get_irq(pdev, 0);
 	if (spi->irq <= 0) {
-		ret = spi->irq;
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to get irq: %d\n", ret);
+		ret = dev_err_probe(&pdev->dev, spi->irq, "failed to get irq\n");
 		goto err_master_put;
 	}
 	ret = devm_request_threaded_irq(&pdev->dev, spi->irq,

drivers/spi/spi-synquacer.c

@@ -640,9 +640,8 @@ static int synquacer_spi_probe(struct platform_device *pdev)
 		}
 
 		if (IS_ERR(sspi->clk)) {
-			if (!(PTR_ERR(sspi->clk) == -EPROBE_DEFER))
-				dev_err(&pdev->dev, "clock not found\n");
-			ret = PTR_ERR(sspi->clk);
+			ret = dev_err_probe(&pdev->dev, PTR_ERR(sspi->clk),
+					    "clock not found\n");
 			goto put_spi;
 		}
 

drivers/spi/spi-tegra114.c

@@ -664,16 +664,11 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi,
 	struct dma_chan *dma_chan;
 	u32 *dma_buf;
 	dma_addr_t dma_phys;
-	int ret;
 
 	dma_chan = dma_request_chan(tspi->dev, dma_to_memory ? "rx" : "tx");
-	if (IS_ERR(dma_chan)) {
-		ret = PTR_ERR(dma_chan);
-		if (ret != -EPROBE_DEFER)
-			dev_err(tspi->dev,
-				"Dma channel is not available: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(dma_chan))
+		return dev_err_probe(tspi->dev, PTR_ERR(dma_chan),
+				     "Dma channel is not available\n");
 
 	dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
 				&dma_phys, GFP_KERNEL);

drivers/spi/spi-tegra20-sflash.c

@@ -359,9 +359,8 @@ static int tegra_sflash_transfer_one_message(struct spi_master *master,
 static irqreturn_t handle_cpu_based_xfer(struct tegra_sflash_data *tsd)
 {
 	struct spi_transfer *t = tsd->curr_xfer;
-	unsigned long flags;
 
-	spin_lock_irqsave(&tsd->lock, flags);
+	spin_lock(&tsd->lock);
 	if (tsd->tx_status || tsd->rx_status || (tsd->status_reg & SPI_BSY)) {
 		dev_err(tsd->dev,
 			"CpuXfer ERROR bit set 0x%x\n", tsd->status_reg);
@@ -391,7 +390,7 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_sflash_data *tsd)
 	tegra_sflash_calculate_curr_xfer_param(tsd->cur_spi, tsd, t);
 	tegra_sflash_start_cpu_based_transfer(tsd, t);
 exit:
-	spin_unlock_irqrestore(&tsd->lock, flags);
+	spin_unlock(&tsd->lock);
 	return IRQ_HANDLED;
 }
 

drivers/spi/spi-tegra20-slink.c

@@ -600,13 +600,9 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
 	struct dma_slave_config dma_sconfig;
 
 	dma_chan = dma_request_chan(tspi->dev, dma_to_memory ? "rx" : "tx");
-	if (IS_ERR(dma_chan)) {
-		ret = PTR_ERR(dma_chan);
-		if (ret != -EPROBE_DEFER)
-			dev_err(tspi->dev,
-				"Dma channel is not available: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(dma_chan))
+		return dev_err_probe(tspi->dev, PTR_ERR(dma_chan),
+				     "Dma channel is not available\n");
 
 	dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
 				&dma_phys, GFP_KERNEL);

drivers/spi/spi-topcliff-pch.c

@@ -1002,7 +1002,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	/* RX */
-	dma->sg_rx_p = kcalloc(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
+	dma->sg_rx_p = kmalloc_array(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
 	if (!dma->sg_rx_p)
 		return;
 
@@ -1065,7 +1065,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 		head = 0;
 	}
 
-	dma->sg_tx_p = kcalloc(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
+	dma->sg_tx_p = kmalloc_array(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
 	if (!dma->sg_tx_p)
 		return;
 

drivers/spi/spi-xilinx.c

@@ -491,8 +491,7 @@ static int xilinx_spi_probe(struct platform_device *pdev)
 		goto put_master;
 	}
 
-	dev_info(&pdev->dev, "at 0x%08llX mapped to 0x%p, irq=%d\n",
-		(unsigned long long)res->start, xspi->regs, xspi->irq);
+	dev_info(&pdev->dev, "at %pR, irq=%d\n", res, xspi->irq);
 
 	if (pdata) {
 		for (i = 0; i < pdata->num_devices; i++)

drivers/spi/spidev.c

@@ -146,7 +146,7 @@ static ssize_t
 spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
 {
 	struct spidev_data	*spidev;
-	ssize_t			status = 0;
+	ssize_t			status;
 
 	/* chipselect only toggles at start or end of operation */
 	if (count > bufsiz)
@@ -176,7 +176,7 @@ spidev_write(struct file *filp, const char __user *buf,
 		size_t count, loff_t *f_pos)
 {
 	struct spidev_data	*spidev;
-	ssize_t			status = 0;
+	ssize_t			status;
 	unsigned long		missing;
 
 	/* chipselect only toggles at start or end of operation */