Commit a9c2aa17 authored by Shinya Kuribayashi's avatar Shinya Kuribayashi Committed by Ralf Baechle

MIPS: Markeins: Remove runtime debug prints

Remove runtime db_* macros as we don't need them any more.  In general,
such helpers are useful for initial porting, but once approved, they are
not indispensable.
Signed-off-by: default avatarShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 9ae9fd79
......@@ -32,7 +32,6 @@
#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
......@@ -67,7 +66,6 @@ void ll_emma2rh_irq_enable(int emma2rh_irq)
(emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) == 0);
emma2rh_out32(reg_index, reg_value | reg_bitmask);
}
......@@ -82,7 +80,6 @@ void ll_emma2rh_irq_disable(int emma2rh_irq)
(emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) != 0);
emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
}
......@@ -118,9 +115,6 @@ void ll_emma2rh_sw_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_SW);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
......@@ -130,9 +124,6 @@ void ll_emma2rh_sw_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < 32);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
......@@ -170,9 +161,6 @@ void ll_emma2rh_gpio_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
......@@ -182,9 +170,6 @@ void ll_emma2rh_gpio_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
......@@ -314,8 +299,6 @@ void __init arch_init_irq(void)
{
u32 reg;
db_run(printk("markeins_irq_setup invoked.\n"));
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment