Commit aa32d1f0 authored by Bastian Hecht's avatar Bastian Hecht Committed by David Woodhouse

mtd: sh_flctl: Use different OOB layout

The flctl hardware has changed and a new OOB layout must be adapted for
2KiB page size NAND chips when using hardware ECC.
The related bit fields ECCPOS[0-2] are gone — the bits are marked as
reserved now in the datasheet. As there are no official users of the
hardware ECC so far, they are completely removed.
Signed-off-by: default avatarBastian Hecht <hechtb@gmail.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 3c7ea4ec
......@@ -44,11 +44,17 @@ static struct nand_ecclayout flctl_4secc_oob_16 = {
};
static struct nand_ecclayout flctl_4secc_oob_64 = {
.eccbytes = 10,
.eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57},
.eccbytes = 4 * 10,
.eccpos = {
6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
.oobfree = {
{.offset = 60,
. length = 4} },
{.offset = 2, .length = 4},
{.offset = 16, .length = 6},
{.offset = 32, .length = 6},
{.offset = 48, .length = 6} },
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
......@@ -62,7 +68,7 @@ static struct nand_bbt_descr flctl_4secc_smallpage = {
static struct nand_bbt_descr flctl_4secc_largepage = {
.options = NAND_BBT_SCAN2NDPAGE,
.offs = 58,
.offs = 0,
.len = 2,
.pattern = scan_ff_pattern,
};
......@@ -832,7 +838,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
chip->ecc.mode = NAND_ECC_HW;
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02;
flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
......
......@@ -49,7 +49,6 @@
#define FLERRADR(f) (f->reg + 0x98)
/* FLCMNCR control bits */
#define ECCPOS2 (0x1 << 25)
#define _4ECCCNTEN (0x1 << 24)
#define _4ECCEN (0x1 << 23)
#define _4ECCCORRECT (0x1 << 22)
......@@ -59,9 +58,6 @@
#define QTSEL_E (0x1 << 17)
#define ENDIAN (0x1 << 16) /* 1 = little endian */
#define FCKSEL_E (0x1 << 15)
#define ECCPOS_00 (0x00 << 12)
#define ECCPOS_01 (0x01 << 12)
#define ECCPOS_02 (0x02 << 12)
#define ACM_SACCES_MODE (0x01 << 10)
#define NANWF_E (0x1 << 9)
#define SE_D (0x1 << 8) /* Spare area disable */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment