Commit aa42db44 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Greg Kroah-Hartman

8250: of: remove remnants of generic of_serial driver

During build testing, I ran into a warning in a driver that I
had written myself at some point:

drivers/tty/serial/8250/8250_of.c: In function 'of_platform_serial_probe':
drivers/tty/serial/8250/8250_of.c:233:1: error: the frame size of 1200 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]

This is harmless by itself, but it shows two other problems in
the driver:

- It still tries to be generic enough to handle all kinds of serial
  ports, where in reality the driver has been 8250-only for a while,
  and every other uart has its own DT support

- As a result of that generalization, we keep two copies of
  'struct uart_port' on the stack during probe(). This is completely
  unnessary.

Removing the last code dealing with unsupported port_type values
solves both problems nicely, and reduces the stack size.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 54b12c48
...@@ -172,7 +172,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ...@@ -172,7 +172,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
{ {
const struct of_device_id *match; const struct of_device_id *match;
struct of_serial_info *info; struct of_serial_info *info;
struct uart_port port; struct uart_8250_port port8250;
u32 tx_threshold;
int port_type; int port_type;
int ret; int ret;
...@@ -188,41 +189,24 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ...@@ -188,41 +189,24 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
return -ENOMEM; return -ENOMEM;
port_type = (unsigned long)match->data; port_type = (unsigned long)match->data;
ret = of_platform_serial_setup(ofdev, port_type, &port, info); memset(&port8250, 0, sizeof(port8250));
ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
if (ret) if (ret)
goto out; goto out;
switch (port_type) { if (port8250.port.fifosize)
case PORT_8250 ... PORT_MAX_8250:
{
u32 tx_threshold;
struct uart_8250_port port8250;
memset(&port8250, 0, sizeof(port8250));
port8250.port = port;
if (port.fifosize)
port8250.capabilities = UART_CAP_FIFO; port8250.capabilities = UART_CAP_FIFO;
/* Check for TX FIFO threshold & set tx_loadsz */ /* Check for TX FIFO threshold & set tx_loadsz */
if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold", if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold",
&tx_threshold) == 0) && &tx_threshold) == 0) &&
(tx_threshold < port.fifosize)) (tx_threshold < port8250.port.fifosize))
port8250.tx_loadsz = port.fifosize - tx_threshold; port8250.tx_loadsz = port8250.port.fifosize - tx_threshold;
if (of_property_read_bool(ofdev->dev.of_node, if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control"))
"auto-flow-control"))
port8250.capabilities |= UART_CAP_AFE; port8250.capabilities |= UART_CAP_AFE;
ret = serial8250_register_8250_port(&port8250); ret = serial8250_register_8250_port(&port8250);
break;
}
default:
/* need to add code for these */
case PORT_UNKNOWN:
dev_info(&ofdev->dev, "Unknown serial port found, ignored\n");
ret = -ENODEV;
break;
}
if (ret < 0) if (ret < 0)
goto out; goto out;
...@@ -232,7 +216,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ...@@ -232,7 +216,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
return 0; return 0;
out: out:
kfree(info); kfree(info);
irq_dispose_mapping(port.irq); irq_dispose_mapping(port8250.port.irq);
return ret; return ret;
} }
...@@ -242,14 +226,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ...@@ -242,14 +226,8 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
static int of_platform_serial_remove(struct platform_device *ofdev) static int of_platform_serial_remove(struct platform_device *ofdev)
{ {
struct of_serial_info *info = platform_get_drvdata(ofdev); struct of_serial_info *info = platform_get_drvdata(ofdev);
switch (info->type) {
case PORT_8250 ... PORT_MAX_8250:
serial8250_unregister_port(info->line); serial8250_unregister_port(info->line);
break;
default:
/* need to add code for these */
break;
}
if (info->clk) if (info->clk)
clk_disable_unprepare(info->clk); clk_disable_unprepare(info->clk);
...@@ -258,18 +236,23 @@ static int of_platform_serial_remove(struct platform_device *ofdev) ...@@ -258,18 +236,23 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
} }
#ifdef CONFIG_PM_SLEEP #ifdef CONFIG_PM_SLEEP
static void of_serial_suspend_8250(struct of_serial_info *info) static int of_serial_suspend(struct device *dev)
{ {
struct of_serial_info *info = dev_get_drvdata(dev);
struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_8250_port *port8250 = serial8250_get_port(info->line);
struct uart_port *port = &port8250->port; struct uart_port *port = &port8250->port;
serial8250_suspend_port(info->line); serial8250_suspend_port(info->line);
if (info->clk && (!uart_console(port) || console_suspend_enabled)) if (info->clk && (!uart_console(port) || console_suspend_enabled))
clk_disable_unprepare(info->clk); clk_disable_unprepare(info->clk);
return 0;
} }
static void of_serial_resume_8250(struct of_serial_info *info) static int of_serial_resume(struct device *dev)
{ {
struct of_serial_info *info = dev_get_drvdata(dev);
struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_8250_port *port8250 = serial8250_get_port(info->line);
struct uart_port *port = &port8250->port; struct uart_port *port = &port8250->port;
...@@ -277,34 +260,6 @@ static void of_serial_resume_8250(struct of_serial_info *info) ...@@ -277,34 +260,6 @@ static void of_serial_resume_8250(struct of_serial_info *info)
clk_prepare_enable(info->clk); clk_prepare_enable(info->clk);
serial8250_resume_port(info->line); serial8250_resume_port(info->line);
}
static int of_serial_suspend(struct device *dev)
{
struct of_serial_info *info = dev_get_drvdata(dev);
switch (info->type) {
case PORT_8250 ... PORT_MAX_8250:
of_serial_suspend_8250(info);
break;
default:
break;
}
return 0;
}
static int of_serial_resume(struct device *dev)
{
struct of_serial_info *info = dev_get_drvdata(dev);
switch (info->type) {
case PORT_8250 ... PORT_MAX_8250:
of_serial_resume_8250(info);
break;
default:
break;
}
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment