Skip to content

L
linux
Commit aaa25a5a authored by Jaehoon Chung's avatar Jaehoon Chung Committed by Kukjin Kim
Browse files
Options

ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos 

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed".
Signed-off-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: default avatarTushar Behera <trblinux@gmail.com>
Reviewed-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarSachin Kamat <sachin.kamat@samsung.com>
[kgene.kim@samsung.com: rebased exynos5250-snow changes]
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 5fbc3f20
Hide whitespace changes
Inline Side-by-side
Showing with 49 additions and 137 deletions
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View file @ aaa25a5a
......@@ -54,17 +54,13 @@ mmc@12550000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
watchdog@10060000 {
......
arch/arm/boot/dts/exynos4412-origen.dts
View file @ aaa25a5a
......@@ -137,17 +137,13 @@ mmc@12550000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
codec@13400000 {
......
arch/arm/boot/dts/exynos4412-trats2.dts
View file @ aaa25a5a
......@@ -520,7 +520,6 @@ buck9_reg: buck9 {
mmc@12550000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
non-removable;
card-detect-delay = <200>;
......@@ -532,11 +531,8 @@ mmc@12550000 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
serial@13800000 {
......
arch/arm/boot/dts/exynos5250-arndale.dts
View file @ aaa25a5a
......@@ -401,7 +401,6 @@ sata-phy@12170000 {
mmc_0: mmc@12200000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -410,17 +409,13 @@ mmc_0: mmc@12200000 {
vmmc-supply = <&mmc_reg>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc_2: mmc@12220000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
......@@ -428,12 +423,9 @@ mmc_2: mmc@12220000 {
vmmc-supply = <&mmc_reg>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
i2s0: i2s@03830000 {
......
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file @ aaa25a5a
......@@ -284,7 +284,6 @@ sata-phy@12170000 {
mmc@12200000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -292,29 +291,22 @@ mmc@12200000 {
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
spi_1: spi@12d30000 {
......
arch/arm/boot/dts/exynos5250-snow.dts
View file @ aaa25a5a
......@@ -563,7 +563,6 @@ hdmiphy: hdmiphy@38 {
&mmc_0 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -571,29 +570,22 @@ &mmc_0 {
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
wp-gpios = <&gpc2 1 0>;
};
bus-width = <4>;
wp-gpios = <&gpc2 1 0>;
cap-sd-highspeed;
};
/*
......@@ -603,7 +595,6 @@ slot@0 {
&mmc_3 {
status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -611,11 +602,8 @@ &mmc_3 {
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
&pinctrl_0 {
......
arch/arm/boot/dts/exynos5260-xyref5260.dts
View file @ aaa25a5a
......@@ -69,7 +69,7 @@ &mmc_0 {
num-slots = <1>;
broken-cd;
bypass-smu;
supports-highspeed;
cap-mmc-highspeed;
supports-hs200-mode; /* 200 Mhz */
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -77,27 +77,19 @@ &mmc_0 {
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
};
arch/arm/boot/dts/exynos5410-smdk5410.dts
View file @ aaa25a5a
......@@ -40,33 +40,25 @@ firmware@02037000 {
&mmc_0 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-mmc-highspeed;
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
bus-width = <4>;
disable-wp;
};
&uart0 {
......
arch/arm/boot/dts/exynos5420-arndale-octa.dts
View file @ aaa25a5a
......@@ -50,7 +50,6 @@ codec@11000000 {
mmc@12200000 {
status = "okay";
broken-cd;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
......@@ -58,16 +57,12 @@ mmc@12200000 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
......@@ -75,11 +70,8 @@ mmc@12220000 {
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
hsi2c_4: i2c@12CA0000 {
......
arch/arm/boot/dts/exynos5420-peach-pit.dts
View file @ aaa25a5a
......@@ -187,7 +187,7 @@ &mmc_0 {
num-slots = <1>;
broken-cd;
caps2-mmc-hs200-1_8v;
supports-highspeed;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
clock-frequency = <400000000>;
......@@ -196,17 +196,13 @@ &mmc_0 {
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -214,11 +210,7 @@ &mmc_2 {
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
};
......
arch/arm/boot/dts/exynos5420-smdk5420.dts
View file @ aaa25a5a
......@@ -76,34 +76,26 @@ codec@11000000 {
mmc@12200000 {
status = "okay";
broken-cd;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 {
status = "okay";
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
cap-sd-highspeed;
};
dp-controller@145B0000 {
......
arch/arm/boot/dts/exynos5800-peach-pi.dts
View file @ aaa25a5a
......@@ -185,7 +185,7 @@ &mmc_0 {
num-slots = <1>;
broken-cd;
caps2-mmc-hs200-1_8v;
supports-highspeed;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
clock-frequency = <400000000>;
......@@ -194,17 +194,13 @@ &mmc_0 {
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
bus-width = <8>;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <3>;
......@@ -212,11 +208,7 @@ &mmc_2 {
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
bus-width = <4>;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7