Commit aabf19c2 authored by Ben Skeggs's avatar Ben Skeggs

drm/nouveau/device: recognise GK208

Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 13d2b35a
...@@ -161,25 +161,26 @@ nouveau_devobj_ctor(struct nouveau_object *parent, ...@@ -161,25 +161,26 @@ nouveau_devobj_ctor(struct nouveau_object *parent,
if ((boot0 & 0x1f000000) > 0) { if ((boot0 & 0x1f000000) > 0) {
device->chipset = (boot0 & 0x1ff00000) >> 20; device->chipset = (boot0 & 0x1ff00000) >> 20;
switch (device->chipset & 0x1f0) { switch (device->chipset & 0x1f0) {
case 0x10: { case 0x010: {
if (0x461 & (1 << (device->chipset & 0xf))) if (0x461 & (1 << (device->chipset & 0xf)))
device->card_type = NV_10; device->card_type = NV_10;
else else
device->card_type = NV_11; device->card_type = NV_11;
break; break;
} }
case 0x20: device->card_type = NV_20; break; case 0x020: device->card_type = NV_20; break;
case 0x30: device->card_type = NV_30; break; case 0x030: device->card_type = NV_30; break;
case 0x40: case 0x040:
case 0x60: device->card_type = NV_40; break; case 0x060: device->card_type = NV_40; break;
case 0x50: case 0x050:
case 0x80: case 0x080:
case 0x90: case 0x090:
case 0xa0: device->card_type = NV_50; break; case 0x0a0: device->card_type = NV_50; break;
case 0xc0: device->card_type = NV_C0; break; case 0x0c0: device->card_type = NV_C0; break;
case 0xd0: device->card_type = NV_D0; break; case 0x0d0: device->card_type = NV_D0; break;
case 0xe0: case 0x0e0:
case 0xf0: device->card_type = NV_E0; break; case 0x0f0:
case 0x100: device->card_type = NV_E0; break;
default: default:
break; break;
} }
......
...@@ -174,6 +174,40 @@ nve0_identify(struct nouveau_device *device) ...@@ -174,6 +174,40 @@ nve0_identify(struct nouveau_device *device)
device->oclass[NVDEV_ENGINE_BSP ] = &nve0_bsp_oclass; device->oclass[NVDEV_ENGINE_BSP ] = &nve0_bsp_oclass;
device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass; device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass; device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
#endif
break;
case 0x108:
device->cname = "GK208";
device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
device->oclass[NVDEV_SUBDEV_GPIO ] = &nve0_gpio_oclass;
device->oclass[NVDEV_SUBDEV_I2C ] = &nvd0_i2c_oclass;
device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
device->oclass[NVDEV_SUBDEV_THERM ] = &nvd0_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
device->oclass[NVDEV_SUBDEV_MC ] = nvc3_mc_oclass;
device->oclass[NVDEV_SUBDEV_BUS ] = &nvc0_bus_oclass;
device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
device->oclass[NVDEV_SUBDEV_FB ] = nvc0_fb_oclass;
device->oclass[NVDEV_SUBDEV_LTCG ] = &nvc0_ltcg_oclass;
device->oclass[NVDEV_SUBDEV_IBUS ] = &nve0_ibus_oclass;
device->oclass[NVDEV_SUBDEV_INSTMEM] = &nv50_instmem_oclass;
device->oclass[NVDEV_SUBDEV_VM ] = &nvc0_vmmgr_oclass;
device->oclass[NVDEV_SUBDEV_BAR ] = &nvc0_bar_oclass;
device->oclass[NVDEV_ENGINE_DMAOBJ ] = &nvd0_dmaeng_oclass;
#if 0
device->oclass[NVDEV_ENGINE_FIFO ] = &nve0_fifo_oclass;
device->oclass[NVDEV_ENGINE_SW ] = nvc0_software_oclass;
device->oclass[NVDEV_ENGINE_GR ] = nvf0_graph_oclass;
#endif
device->oclass[NVDEV_ENGINE_DISP ] = &nvf0_disp_oclass;
#if 0
device->oclass[NVDEV_ENGINE_COPY0 ] = &nve0_copy0_oclass;
device->oclass[NVDEV_ENGINE_COPY1 ] = &nve0_copy1_oclass;
device->oclass[NVDEV_ENGINE_COPY2 ] = &nve0_copy2_oclass;
device->oclass[NVDEV_ENGINE_BSP ] = &nve0_bsp_oclass;
device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
#endif #endif
break; break;
default: default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment