net: stmmac: Uniformize the use of dma_{rx/tx}_mode callbacks

Instead of relying on the GMAC version for choosing if we need to use
dma_{rx/tx}_mode or just dma_mode callback lets uniformize this and
always use the dma_{rx/tx}_mode callbacks.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c

@@ -437,13 +437,36 @@ static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr,
 	return ret;
 }
 
-static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
-					   int rxmode, int rxfifosz)
+static void sun8i_dwmac_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+					      u32 channel, int fifosz, u8 qmode)
+{
+	u32 v;
+
+	v = readl(ioaddr + EMAC_RX_CTL1);
+	if (mode == SF_DMA_MODE) {
+		v |= EMAC_RX_MD;
+	} else {
+		v &= ~EMAC_RX_MD;
+		v &= ~EMAC_RX_TH_MASK;
+		if (mode < 32)
+			v |= EMAC_RX_TH_32;
+		else if (mode < 64)
+			v |= EMAC_RX_TH_64;
+		else if (mode < 96)
+			v |= EMAC_RX_TH_96;
+		else if (mode < 128)
+			v |= EMAC_RX_TH_128;
+	}
+	writel(v, ioaddr + EMAC_RX_CTL1);
+}
+
+static void sun8i_dwmac_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					      u32 channel, int fifosz, u8 qmode)
 {
 	u32 v;
 
 	v = readl(ioaddr + EMAC_TX_CTL1);
-	if (txmode == SF_DMA_MODE) {
+	if (mode == SF_DMA_MODE) {
 		v |= EMAC_TX_MD;
 		/* Undocumented bit (called TX_NEXT_FRM in BSP), the original
 		 * comment is
@@ -454,40 +477,24 @@ static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode,
 	} else {
 		v &= ~EMAC_TX_MD;
 		v &= ~EMAC_TX_TH_MASK;
-		if (txmode < 64)
+		if (mode < 64)
 			v |= EMAC_TX_TH_64;
-		else if (txmode < 128)
+		else if (mode < 128)
 			v |= EMAC_TX_TH_128;
-		else if (txmode < 192)
+		else if (mode < 192)
 			v |= EMAC_TX_TH_192;
-		else if (txmode < 256)
+		else if (mode < 256)
 			v |= EMAC_TX_TH_256;
 	}
 	writel(v, ioaddr + EMAC_TX_CTL1);
-
-	v = readl(ioaddr + EMAC_RX_CTL1);
-	if (rxmode == SF_DMA_MODE) {
-		v |= EMAC_RX_MD;
-	} else {
-		v &= ~EMAC_RX_MD;
-		v &= ~EMAC_RX_TH_MASK;
-		if (rxmode < 32)
-			v |= EMAC_RX_TH_32;
-		else if (rxmode < 64)
-			v |= EMAC_RX_TH_64;
-		else if (rxmode < 96)
-			v |= EMAC_RX_TH_96;
-		else if (rxmode < 128)
-			v |= EMAC_RX_TH_128;
-	}
-	writel(v, ioaddr + EMAC_RX_CTL1);
 }
 
 static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
 	.reset = sun8i_dwmac_dma_reset,
 	.init = sun8i_dwmac_dma_init,
 	.dump_regs = sun8i_dwmac_dump_regs,
-	.dma_mode = sun8i_dwmac_dma_operation_mode,
+	.dma_rx_mode = sun8i_dwmac_dma_operation_mode_rx,
+	.dma_tx_mode = sun8i_dwmac_dma_operation_mode_tx,
 	.enable_dma_transmission = sun8i_dwmac_enable_dma_transmission,
 	.enable_dma_irq = sun8i_dwmac_enable_dma_irq,
 	.disable_dma_irq = sun8i_dwmac_disable_dma_irq,

drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c

@@ -148,12 +148,40 @@ static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
 	return csr6;
 }
 
-static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
-					 int rxmode, int rxfifosz)
+static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
 
-	if (txmode == SF_DMA_MODE) {
+	if (mode == SF_DMA_MODE) {
+		pr_debug("GMAC: enable RX store and forward mode\n");
+		csr6 |= DMA_CONTROL_RSF;
+	} else {
+		pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
+		csr6 &= ~DMA_CONTROL_RSF;
+		csr6 &= DMA_CONTROL_TC_RX_MASK;
+		if (mode <= 32)
+			csr6 |= DMA_CONTROL_RTC_32;
+		else if (mode <= 64)
+			csr6 |= DMA_CONTROL_RTC_64;
+		else if (mode <= 96)
+			csr6 |= DMA_CONTROL_RTC_96;
+		else
+			csr6 |= DMA_CONTROL_RTC_128;
+	}
+
+	/* Configure flow control based on rx fifo size */
+	csr6 = dwmac1000_configure_fc(csr6, fifosz);
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable TX store and forward mode\n");
 		/* Transmit COE type 2 cannot be done in cut-through mode. */
 		csr6 |= DMA_CONTROL_TSF;
@@ -162,42 +190,22 @@ static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
 		 */
 		csr6 |= DMA_CONTROL_OSF;
 	} else {
-		pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode);
+		pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
 		csr6 &= ~DMA_CONTROL_TSF;
 		csr6 &= DMA_CONTROL_TC_TX_MASK;
 		/* Set the transmit threshold */
-		if (txmode <= 32)
+		if (mode <= 32)
 			csr6 |= DMA_CONTROL_TTC_32;
-		else if (txmode <= 64)
+		else if (mode <= 64)
 			csr6 |= DMA_CONTROL_TTC_64;
-		else if (txmode <= 128)
+		else if (mode <= 128)
 			csr6 |= DMA_CONTROL_TTC_128;
-		else if (txmode <= 192)
+		else if (mode <= 192)
 			csr6 |= DMA_CONTROL_TTC_192;
 		else
 			csr6 |= DMA_CONTROL_TTC_256;
 	}
 
-	if (rxmode == SF_DMA_MODE) {
-		pr_debug("GMAC: enable RX store and forward mode\n");
-		csr6 |= DMA_CONTROL_RSF;
-	} else {
-		pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode);
-		csr6 &= ~DMA_CONTROL_RSF;
-		csr6 &= DMA_CONTROL_TC_RX_MASK;
-		if (rxmode <= 32)
-			csr6 |= DMA_CONTROL_RTC_32;
-		else if (rxmode <= 64)
-			csr6 |= DMA_CONTROL_RTC_64;
-		else if (rxmode <= 96)
-			csr6 |= DMA_CONTROL_RTC_96;
-		else
-			csr6 |= DMA_CONTROL_RTC_128;
-	}
-
-	/* Configure flow control based on rx fifo size */
-	csr6 = dwmac1000_configure_fc(csr6, rxfifosz);
-
 	writel(csr6, ioaddr + DMA_CONTROL);
 }
 
@@ -258,7 +266,8 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.init = dwmac1000_dma_init,
 	.axi = dwmac1000_dma_axi,
 	.dump_regs = dwmac1000_dump_dma_regs,
-	.dma_mode = dwmac1000_dma_operation_mode,
+	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
+	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
 	.enable_dma_transmission = dwmac_enable_dma_transmission,
 	.enable_dma_irq = dwmac_enable_dma_irq,
 	.disable_dma_irq = dwmac_disable_dma_irq,

drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c

@@ -51,14 +51,14 @@ static void dwmac100_dma_init(void __iomem *ioaddr,
  * The transmit threshold can be programmed by setting the TTC bits in the DMA
  * control register.
  */
-static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode,
-					int rxmode, int rxfifosz)
+static void dwmac100_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					   u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
 
-	if (txmode <= 32)
+	if (mode <= 32)
 		csr6 |= DMA_CONTROL_TTC_32;
-	else if (txmode <= 64)
+	else if (mode <= 64)
 		csr6 |= DMA_CONTROL_TTC_64;
 	else
 		csr6 |= DMA_CONTROL_TTC_128;
@@ -113,7 +113,7 @@ const struct stmmac_dma_ops dwmac100_dma_ops = {
 	.reset = dwmac_dma_reset,
 	.init = dwmac100_dma_init,
 	.dump_regs = dwmac100_dump_dma_regs,
-	.dma_mode = dwmac100_dma_operation_mode,
+	.dma_tx_mode = dwmac100_dma_operation_mode_tx,
 	.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,
 	.enable_dma_transmission = dwmac_enable_dma_transmission,
 	.enable_dma_irq = dwmac_enable_dma_irq,

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -153,10 +153,6 @@ struct stmmac_dma_ops {
 	void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
 	/* Dump DMA registers */
 	void (*dump_regs)(void __iomem *ioaddr, u32 *reg_space);
-	/* Set tx/rx threshold in the csr6 register
-	 * An invalid value enables the store-and-forward mode */
-	void (*dma_mode)(void __iomem *ioaddr, int txmode, int rxmode,
-			 int rxfifosz);
 	void (*dma_rx_mode)(void __iomem *ioaddr, int mode, u32 channel,
 			    int fifosz, u8 qmode);
 	void (*dma_tx_mode)(void __iomem *ioaddr, int mode, u32 channel,
@@ -199,8 +195,6 @@ struct stmmac_dma_ops {
 	stmmac_do_void_callback(__priv, dma, axi, __args)
 #define stmmac_dump_dma_regs(__priv, __args...) \
 	stmmac_do_void_callback(__priv, dma, dump_regs, __args)
-#define stmmac_dma_mode(__priv, __args...) \
-	stmmac_do_void_callback(__priv, dma, dma_mode, __args)
 #define stmmac_dma_rx_mode(__priv, __args...) \
 	stmmac_do_void_callback(__priv, dma, dma_rx_mode, __args)
 #define stmmac_dma_tx_mode(__priv, __args...) \

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -1787,22 +1787,18 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 	}
 
 	/* configure all channels */
-	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-		for (chan = 0; chan < rx_channels_count; chan++) {
-			qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
+	for (chan = 0; chan < rx_channels_count; chan++) {
+		qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
 
-			stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
-					rxfifosz, qmode);
-		}
+		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
+				rxfifosz, qmode);
+	}
 
-		for (chan = 0; chan < tx_channels_count; chan++) {
-			qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
+	for (chan = 0; chan < tx_channels_count; chan++) {
+		qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
 
-			stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
-					txfifosz, qmode);
-		}
-	} else {
-		stmmac_dma_mode(priv, priv->ioaddr, txmode, rxmode, rxfifosz);
+		stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
+				txfifosz, qmode);
 	}
 }
 
@@ -1971,14 +1967,8 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
 	rxfifosz /= rx_channels_count;
 	txfifosz /= tx_channels_count;
 
-	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
-		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz,
-				rxqmode);
-		stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz,
-				txqmode);
-	} else {
-		stmmac_dma_mode(priv, priv->ioaddr, txmode, rxmode, rxfifosz);
-	}
+	stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, rxqmode);
+	stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz, txqmode);
 }
 
 static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)