Commit ab3172ef authored by Arnaud Ebalard's avatar Arnaud Ebalard Committed by Jason Cooper

ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120

NETGEAR ReadyNAS 2120 supports its four main SATA disks via 2
Marvell 88SE9170 SATA controllers connected on the PCIe bus
of the the SoC. The two eSATA ports available at the rear of
the device are handled by the native SATA controller of the
Armada XP SoC powering the NAS. This patch enables the SoC
SATA controller in the .dts file to make those two rear ports
available.
Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/f3876c7a9ef11eb758b9df18c671ee740b8be614.1414250947.git.arno@natisbad.orgSigned-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 9a27b449
...@@ -137,6 +137,12 @@ err_led_pin: err-led-pin { ...@@ -137,6 +137,12 @@ err_led_pin: err-led-pin {
}; };
}; };
/* Two rear eSATA ports */
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
serial@12000 { serial@12000 {
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment