[SCSI] lpfc 8.3.21: Initialization and user interface changes

- Make link speed not supported by port message an error message.
- Add support for new SLI failure codes add sysfs parameter to reflect the
  security setting and current state.
- Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory.

[jejb: fix up compile failure]
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/lpfc/lpfc.h

@@ -662,7 +662,7 @@ struct lpfc_hba {
 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
 #define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
-
+	uint32_t cfg_enable_dss;
 	lpfc_vpd_t vpd;		/* vital product data */
 
 	struct pci_dev *pcidev;

drivers/scsi/lpfc/lpfc_debugfs.c

@@ -82,23 +82,23 @@
  *                               the HBA. X MUST also be a power of 2.
  */
 static int lpfc_debugfs_enable = 1;
-module_param(lpfc_debugfs_enable, int, 0);
+module_param(lpfc_debugfs_enable, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services");
 
 /* This MUST be a power of 2 */
 static int lpfc_debugfs_max_disc_trc;
-module_param(lpfc_debugfs_max_disc_trc, int, 0);
+module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc,
 	"Set debugfs discovery trace depth");
 
 /* This MUST be a power of 2 */
 static int lpfc_debugfs_max_slow_ring_trc;
-module_param(lpfc_debugfs_max_slow_ring_trc, int, 0);
+module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
 	"Set debugfs slow ring trace depth");
 
 static int lpfc_debugfs_mask_disc_trc;
-module_param(lpfc_debugfs_mask_disc_trc, int, 0);
+module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
 	"Set debugfs discovery trace mask");
 

drivers/scsi/lpfc/lpfc_hw.h

@@ -3204,7 +3204,10 @@ typedef struct {
 #define IOERR_SLER_RRQ_RJT_ERR        0x4C
 #define IOERR_SLER_RRQ_RETRY_ERR      0x4D
 #define IOERR_SLER_ABTS_ERR           0x4E
-
+#define IOERR_ELXSEC_KEY_UNWRAP_ERROR		0xF0
+#define IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR	0xF1
+#define IOERR_ELXSEC_CRYPTO_ERROR		0xF2
+#define IOERR_ELXSEC_CRYPTO_COMPARE_ERROR	0xF3
 #define IOERR_DRVR_MASK               0x100
 #define IOERR_SLI_DOWN                0x101  /* ulpStatus  - Driver defined */
 #define IOERR_SLI_BRESET              0x102

drivers/scsi/lpfc/lpfc_init.c

@@ -460,7 +460,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G)
 		&& !(phba->lmt & LMT_16Gb))) {
 		/* Reset link speed to auto */
-		lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
+		lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 			"1302 Invalid speed for this board: "
 			"Reset link speed to auto: x%x\n",
 			phba->cfg_link_speed);

drivers/scsi/lpfc/lpfc_mbox.c

@@ -1263,7 +1263,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
-		mb->un.varCfgPort.cdss = 1; /* Configure Security */
+		if (phba->cfg_enable_dss)
+			mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();

drivers/scsi/lpfc/lpfc_scsi.c

@@ -2508,6 +2508,15 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 			break;
 		case IOSTAT_LOCAL_REJECT:
 		case IOSTAT_REMOTE_STOP:
+			if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
+			    lpfc_cmd->result ==
+					IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
+			    lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
+			    lpfc_cmd->result ==
+					IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
+				cmd->result = ScsiResult(DID_NO_CONNECT, 0);
+				break;
+			}
 			if (lpfc_cmd->result == IOERR_INVALID_RPI ||
 			    lpfc_cmd->result == IOERR_NO_RESOURCES ||
 			    lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
@@ -2515,7 +2524,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 				cmd->result = ScsiResult(DID_REQUEUE, 0);
 				break;
 			}
-
 			if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
 			     lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
 			     pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
@@ -2545,7 +2553,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 						lpfc_cmd->cur_iocbq.sli4_xritag,
 						0, 0);
 			}
-
 		/* else: fall through */
 		default:
 			cmd->result = ScsiResult(DID_ERROR, 0);
@@ -2556,9 +2563,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		    || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
 			cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
 						 SAM_STAT_BUSY);
-	} else {
+	} else
 		cmd->result = ScsiResult(DID_OK, 0);
-	}
 
 	if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
 		uint32_t *lp = (uint32_t *)cmd->sense_buffer;