Commit ab7e7fbf authored by Paul Cercueil's avatar Paul Cercueil Committed by Luis Henriques

iio: adis16400: Fix burst mode

commit 9df56035 upstream.

There are a few issues with the burst mode support. For one we don't setup
the rx buffer, so the buffer will never be filled and all samples will read
as the zero. Furthermore the tx buffer has the wrong type, which means the
driver sends the wrong command and not the right data is returned.

The final issue is that in burst mode all channels are transferred. Hence
the length of the transfer length should be the number of hardware
channels * 2 bytes. Currently the driver uses indio_dev->scan_bytes for
this. But if the timestamp channel is enabled the scan_bytes will be larger
than the burst length. Fix this by just calculating the burst length based
on the number of hardware channels.
Signed-off-by: default avatarPaul Cercueil <paul.cercueil@analog.com>
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent 8f3521e3
......@@ -18,7 +18,8 @@ int adis16400_update_scan_mode(struct iio_dev *indio_dev,
{
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
uint16_t *tx;
unsigned int burst_length;
u8 *tx;
if (st->variant->flags & ADIS16400_NO_BURST)
return adis_update_scan_mode(indio_dev, scan_mask);
......@@ -26,26 +27,27 @@ int adis16400_update_scan_mode(struct iio_dev *indio_dev,
kfree(adis->xfer);
kfree(adis->buffer);
/* All but the timestamp channel */
burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
adis->buffer = kzalloc(indio_dev->scan_bytes + sizeof(u16),
GFP_KERNEL);
adis->buffer = kzalloc(burst_length + sizeof(u16), GFP_KERNEL);
if (!adis->buffer)
return -ENOMEM;
tx = adis->buffer + indio_dev->scan_bytes;
tx = adis->buffer + burst_length;
tx[0] = ADIS_READ_REG(ADIS16400_GLOB_CMD);
tx[1] = 0;
adis->xfer[0].tx_buf = tx;
adis->xfer[0].bits_per_word = 8;
adis->xfer[0].len = 2;
adis->xfer[1].tx_buf = tx;
adis->xfer[1].rx_buf = adis->buffer;
adis->xfer[1].bits_per_word = 8;
adis->xfer[1].len = indio_dev->scan_bytes;
adis->xfer[1].len = burst_length;
spi_message_init(&adis->msg);
spi_message_add_tail(&adis->xfer[0], &adis->msg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment