Commit aba09b44 authored by Masami Hiramatsu's avatar Masami Hiramatsu Committed by Alexei Starovoitov

docs: fprobe: Add fprobe description to ftrace-use.rst

Add a documentation of fprobe for the user who needs
this interface.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarSteven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: default avatarSteven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735294272.1084943.12372175959382037397.stgit@devnote2
parent ab51e15d
.. SPDX-License-Identifier: GPL-2.0
==================================
Fprobe - Function entry/exit probe
==================================
.. Author: Masami Hiramatsu <mhiramat@kernel.org>
Introduction
============
Fprobe is a function entry/exit probe mechanism based on ftrace.
Instead of using ftrace full feature, if you only want to attach callbacks
on function entry and exit, similar to the kprobes and kretprobes, you can
use fprobe. Compared with kprobes and kretprobes, fprobe gives faster
instrumentation for multiple functions with single handler. This document
describes how to use fprobe.
The usage of fprobe
===================
The fprobe is a wrapper of ftrace (+ kretprobe-like return callback) to
attach callbacks to multiple function entry and exit. User needs to set up
the `struct fprobe` and pass it to `register_fprobe()`.
Typically, `fprobe` data structure is initialized with the `entry_handler`
and/or `exit_handler` as below.
.. code-block:: c
struct fprobe fp = {
.entry_handler = my_entry_callback,
.exit_handler = my_exit_callback,
};
To enable the fprobe, call one of register_fprobe(), register_fprobe_ips(), and
register_fprobe_syms(). These functions register the fprobe with different types
of parameters.
The register_fprobe() enables a fprobe by function-name filters.
E.g. this enables @fp on "func*()" function except "func2()".::
register_fprobe(&fp, "func*", "func2");
The register_fprobe_ips() enables a fprobe by ftrace-location addresses.
E.g.
.. code-block:: c
unsigned long ips[] = { 0x.... };
register_fprobe_ips(&fp, ips, ARRAY_SIZE(ips));
And the register_fprobe_syms() enables a fprobe by symbol names.
E.g.
.. code-block:: c
char syms[] = {"func1", "func2", "func3"};
register_fprobe_syms(&fp, syms, ARRAY_SIZE(syms));
To disable (remove from functions) this fprobe, call::
unregister_fprobe(&fp);
You can temporally (soft) disable the fprobe by::
disable_fprobe(&fp);
and resume by::
enable_fprobe(&fp);
The above is defined by including the header::
#include <linux/fprobe.h>
Same as ftrace, the registered callbacks will start being called some time
after the register_fprobe() is called and before it returns. See
:file:`Documentation/trace/ftrace.rst`.
Also, the unregister_fprobe() will guarantee that the both enter and exit
handlers are no longer being called by functions after unregister_fprobe()
returns as same as unregister_ftrace_function().
The fprobe entry/exit handler
=============================
The prototype of the entry/exit callback function is as follows:
.. code-block:: c
void callback_func(struct fprobe *fp, unsigned long entry_ip, struct pt_regs *regs);
Note that both entry and exit callbacks have same ptototype. The @entry_ip is
saved at function entry and passed to exit handler.
@fp
This is the address of `fprobe` data structure related to this handler.
You can embed the `fprobe` to your data structure and get it by
container_of() macro from @fp. The @fp must not be NULL.
@entry_ip
This is the ftrace address of the traced function (both entry and exit).
Note that this may not be the actual entry address of the function but
the address where the ftrace is instrumented.
@regs
This is the `pt_regs` data structure at the entry and exit. Note that
the instruction pointer of @regs may be different from the @entry_ip
in the entry_handler. If you need traced instruction pointer, you need
to use @entry_ip. On the other hand, in the exit_handler, the instruction
pointer of @regs is set to the currect return address.
Share the callbacks with kprobes
================================
Since the recursion safeness of the fprobe (and ftrace) is a bit different
from the kprobes, this may cause an issue if user wants to run the same
code from the fprobe and the kprobes.
Kprobes has per-cpu 'current_kprobe' variable which protects the kprobe
handler from recursion in all cases. On the other hand, fprobe uses
only ftrace_test_recursion_trylock(). This allows interrupt context to
call another (or same) fprobe while the fprobe user handler is running.
This is not a matter if the common callback code has its own recursion
detection, or it can handle the recursion in the different contexts
(normal/interrupt/NMI.)
But if it relies on the 'current_kprobe' recursion lock, it has to check
kprobe_running() and use kprobe_busy_*() APIs.
Fprobe has FPROBE_FL_KPROBE_SHARED flag to do this. If your common callback
code will be shared with kprobes, please set FPROBE_FL_KPROBE_SHARED
*before* registering the fprobe, like:
.. code-block:: c
fprobe.flags = FPROBE_FL_KPROBE_SHARED;
register_fprobe(&fprobe, "func*", NULL);
This will protect your common callback from the nested call.
The missed counter
==================
The `fprobe` data structure has `fprobe::nmissed` counter field as same as
kprobes.
This counter counts up when;
- fprobe fails to take ftrace_recursion lock. This usually means that a function
which is traced by other ftrace users is called from the entry_handler.
- fprobe fails to setup the function exit because of the shortage of rethook
(the shadow stack for hooking the function return.)
The `fprobe::nmissed` field counts up in both cases. Therefore, the former
skips both of entry and exit callback and the latter skips the exit
callback, but in both case the counter will increase by 1.
Note that if you set the FTRACE_OPS_FL_RECURSION and/or FTRACE_OPS_FL_RCU to
`fprobe::ops::flags` (ftrace_ops::flags) when registering the fprobe, this
counter may not work correctly, because ftrace skips the fprobe function which
increase the counter.
Functions and structures
========================
.. kernel-doc:: include/linux/fprobe.h
.. kernel-doc:: kernel/trace/fprobe.c
...@@ -9,6 +9,7 @@ Linux Tracing Technologies ...@@ -9,6 +9,7 @@ Linux Tracing Technologies
tracepoint-analysis tracepoint-analysis
ftrace ftrace
ftrace-uses ftrace-uses
fprobe
kprobes kprobes
kprobetrace kprobetrace
uprobetracer uprobetracer
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment