Commit abddafd4 authored by Grzegorz Siwik's avatar Grzegorz Siwik Committed by Tony Nguyen

ice: Fix clearing of promisc mode with bridge over bond

When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.

[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!

Fixes: c31af68a ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarGrzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/Tested-by: default avatarJaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: default avatarIgor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
parent 11e551a2
......@@ -4062,7 +4062,11 @@ int ice_vsi_del_vlan_zero(struct ice_vsi *vsi)
if (err && err != -EEXIST)
return err;
return 0;
/* when deleting the last VLAN filter, make sure to disable the VLAN
* promisc mode so the filter isn't left by accident
*/
return ice_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
ICE_MCAST_VLAN_PROMISC_BITS, 0);
}
/**
......
......@@ -267,8 +267,10 @@ static int ice_set_promisc(struct ice_vsi *vsi, u8 promisc_m)
status = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx,
promisc_m, 0);
}
if (status && status != -EEXIST)
return status;
return status;
return 0;
}
/**
......@@ -3573,6 +3575,14 @@ ice_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
while (test_and_set_bit(ICE_CFG_BUSY, vsi->state))
usleep_range(1000, 2000);
ret = ice_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
ICE_MCAST_VLAN_PROMISC_BITS, vid);
if (ret) {
netdev_err(netdev, "Error clearing multicast promiscuous mode on VSI %i\n",
vsi->vsi_num);
vsi->current_netdev_flags |= IFF_ALLMULTI;
}
vlan_ops = ice_get_compat_vsi_vlan_ops(vsi);
/* Make sure VLAN delete is successful before updating VLAN
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment