Skip to content

L
linux
Commit abf1e27f authored by John Bonesio's avatar John Bonesio Committed by Grant Likely
Browse files
Options

powerpc/5200: dts: rename nodes to prepare for refactoring dts files 

This patch renames nodes in dts fils for MPC5200b files to prepare for
refactoring of these files later. When refactoring it will be easier to verify
the results if the node names aren't changing at the same time.
Signed-off-by: default avatarJohn Bonesio <bones@secretlab.ca>
Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent 658f29a5
Hide whitespace changes
Inline Side-by-side
Showing with 26 additions and 26 deletions
arch/powerpc/boot/dts/cm5200.dts
View file @ abf1e27f
...@@ -160,25 +160,25 @@ xlb@1f00 { ...@@ -160,25 +160,25 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2000 { // PSC1 psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
interrupts = <2 1 0>; interrupts = <2 1 0>;
}; };
serial@2200 { // PSC2 psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>; reg = <0x2200 0x100>;
interrupts = <2 2 0>; interrupts = <2 2 0>;
}; };
serial@2400 { // PSC3 psc@2400 { // PSC3
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>; reg = <0x2400 0x100>;
interrupts = <2 3 0>; interrupts = <2 3 0>;
}; };
serial@2c00 { // PSC6 psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>; reg = <0x2c00 0x100>;
interrupts = <2 4 0>; interrupts = <2 4 0>;
......
arch/powerpc/boot/dts/digsy_mtc.dts
View file @ abf1e27f
...@@ -155,13 +155,13 @@ xlb@1f00 { ...@@ -155,13 +155,13 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2600 { // PSC4 psc@2600 { // PSC4
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2600 0x100>; reg = <0x2600 0x100>;
interrupts = <2 11 0>; interrupts = <2 11 0>;
}; };
serial@2800 { // PSC5 psc@2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2800 0x100>; reg = <0x2800 0x100>;
interrupts = <2 12 0>; interrupts = <2 12 0>;
...@@ -217,7 +217,7 @@ sram@8000 { ...@@ -217,7 +217,7 @@ sram@8000 {
}; };
}; };
lpb { localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus"; compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
......
arch/powerpc/boot/dts/lite5200b.dts
View file @ abf1e27f
...@@ -172,7 +172,7 @@ xlb@1f00 { ...@@ -172,7 +172,7 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2000 { // PSC1 psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <0>; cell-index = <0>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
......
arch/powerpc/boot/dts/media5200.dts
View file @ abf1e27f
...@@ -183,7 +183,7 @@ xlb@1f00 { ...@@ -183,7 +183,7 @@ xlb@1f00 {
}; };
// PSC6 in uart mode // PSC6 in uart mode
console: serial@2c00 { // PSC6 console: psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>; cell-index = <5>;
port-number = <0>; // Logical port assignment port-number = <0>; // Logical port assignment
......
arch/powerpc/boot/dts/motionpro.dts
View file @ abf1e27f
...@@ -100,7 +100,7 @@ timer@650 { // General Purpose Timer ...@@ -100,7 +100,7 @@ timer@650 { // General Purpose Timer
interrupts = <1 14 0>; interrupts = <1 14 0>;
}; };
motionpro-led@660 { // Motion-PRO status LED timer@660 { // Motion-PRO status LED
compatible = "promess,motionpro-led"; compatible = "promess,motionpro-led";
label = "motionpro-statusled"; label = "motionpro-statusled";
reg = <0x660 0x10>; reg = <0x660 0x10>;
...@@ -108,7 +108,7 @@ motionpro-led@660 { // Motion-PRO status LED ...@@ -108,7 +108,7 @@ motionpro-led@660 { // Motion-PRO status LED
blink-delay = <100>; // 100 msec blink-delay = <100>; // 100 msec
}; };
motionpro-led@670 { // Motion-PRO ready LED timer@670 { // Motion-PRO ready LED
compatible = "promess,motionpro-led"; compatible = "promess,motionpro-led";
label = "motionpro-readyled"; label = "motionpro-readyled";
reg = <0x670 0x10>; reg = <0x670 0x10>;
...@@ -169,14 +169,14 @@ xlb@1f00 { ...@@ -169,14 +169,14 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2000 { // PSC1 psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
interrupts = <2 1 0>; interrupts = <2 1 0>;
}; };
// PSC2 in spi master mode // PSC2 in spi master mode
spi@2200 { // PSC2 psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
cell-index = <1>; cell-index = <1>;
reg = <0x2200 0x100>; reg = <0x2200 0x100>;
...@@ -184,7 +184,7 @@ spi@2200 { // PSC2 ...@@ -184,7 +184,7 @@ spi@2200 { // PSC2
}; };
// PSC5 in uart mode // PSC5 in uart mode
serial@2800 { // PSC5 psc@2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2800 0x100>; reg = <0x2800 0x100>;
interrupts = <2 12 0>; interrupts = <2 12 0>;
......
arch/powerpc/boot/dts/mucmc52.dts
View file @ abf1e27f
...@@ -126,19 +126,19 @@ xlb@1f00 { ...@@ -126,19 +126,19 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2000 { /* PSC1 in UART mode */ psc@2000 { /* PSC1 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
interrupts = <2 1 0>; interrupts = <2 1 0>;
}; };
serial@2200 { /* PSC2 in UART mode */ psc@2200 { /* PSC2 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>; reg = <0x2200 0x100>;
interrupts = <2 2 0>; interrupts = <2 2 0>;
}; };
serial@2c00 { /* PSC6 in UART mode */ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>; reg = <0x2c00 0x100>;
interrupts = <2 4 0>; interrupts = <2 4 0>;
......
arch/powerpc/boot/dts/pcm030.dts
View file @ abf1e27f
...@@ -185,7 +185,7 @@ xlb@1f00 { ...@@ -185,7 +185,7 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
ac97@2000 { /* PSC1 in ac97 mode */ psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>; cell-index = <0>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -194,7 +194,7 @@ ac97@2000 { /* PSC1 in ac97 mode */ ...@@ -194,7 +194,7 @@ ac97@2000 { /* PSC1 in ac97 mode */
/* PSC2 port is used by CAN1/2 */ /* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */ psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <2>; cell-index = <2>;
reg = <0x2400 0x100>; reg = <0x2400 0x100>;
...@@ -205,7 +205,7 @@ serial@2400 { /* PSC3 in UART mode */ ...@@ -205,7 +205,7 @@ serial@2400 { /* PSC3 in UART mode */
/* PSC5 is ??? */ /* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>; cell-index = <5>;
reg = <0x2c00 0x100>; reg = <0x2c00 0x100>;
......
arch/powerpc/boot/dts/pcm032.dts
View file @ abf1e27f
...@@ -185,7 +185,7 @@ xlb@1f00 { ...@@ -185,7 +185,7 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
ac97@2000 { /* PSC1 is ac97 */ psc@2000 { /* PSC1 is ac97 */
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
cell-index = <0>; cell-index = <0>;
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
...@@ -194,7 +194,7 @@ ac97@2000 { /* PSC1 is ac97 */ ...@@ -194,7 +194,7 @@ ac97@2000 { /* PSC1 is ac97 */
/* PSC2 port is used by CAN1/2 */ /* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */ psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <2>; cell-index = <2>;
reg = <0x2400 0x100>; reg = <0x2400 0x100>;
...@@ -205,7 +205,7 @@ serial@2400 { /* PSC3 in UART mode */ ...@@ -205,7 +205,7 @@ serial@2400 { /* PSC3 in UART mode */
/* PSC5 is ??? */ /* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>; cell-index = <5>;
reg = <0x2c00 0x100>; reg = <0x2c00 0x100>;
......
arch/powerpc/boot/dts/uc101.dts
View file @ abf1e27f
...@@ -158,19 +158,19 @@ xlb@1f00 { ...@@ -158,19 +158,19 @@ xlb@1f00 {
reg = <0x1f00 0x100>; reg = <0x1f00 0x100>;
}; };
serial@2000 { /* PSC1 in UART mode */ psc@2000 { /* PSC1 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
interrupts = <2 1 0>; interrupts = <2 1 0>;
}; };
serial@2200 { /* PSC2 in UART mode */ psc@2200 { /* PSC2 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>; reg = <0x2200 0x100>;
interrupts = <2 2 0>; interrupts = <2 2 0>;
}; };
serial@2c00 { /* PSC6 in UART mode */ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>; reg = <0x2c00 0x100>;
interrupts = <2 4 0>; interrupts = <2 4 0>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7