Commit ac056546 authored by Luiz Augusto von Dentz's avatar Luiz Augusto von Dentz Committed by Marcel Holtmann

Bluetooth: btintel: Check firmware version before download

This checks the firmware build number, week and year against the
repective loaded version. If details are a match, skip the download
process.
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: default avatarTedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 0f90d320
......@@ -24,6 +24,14 @@
#define ECDSA_OFFSET 644
#define ECDSA_HEADER_LEN 320
#define CMD_WRITE_BOOT_PARAMS 0xfc0e
struct cmd_write_boot_params {
u32 boot_addr;
u8 fw_build_num;
u8 fw_build_ww;
u8 fw_build_yy;
} __packed;
int btintel_check_bdaddr(struct hci_dev *hdev)
{
struct hci_rp_read_bd_addr *bda;
......@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
static int btintel_download_firmware_payload(struct hci_dev *hdev,
const struct firmware *fw,
u32 *boot_param, size_t offset)
size_t offset)
{
int err;
const u8 *fw_ptr;
......@@ -854,21 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
/* Each SKU has a different reset parameter to use in the
* HCI_Intel_Reset command and it is embedded in the firmware
* data. So, instead of using static value per SKU, check
* the firmware data and save it for later use.
*/
if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
/* The boot parameter is the first 32-bit value
* and rest of 3 octets are reserved.
*/
*boot_param = get_unaligned_le32(fw_ptr + frag_len +
sizeof(*cmd));
bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
}
frag_len += sizeof(*cmd) + cmd->plen;
/* The parameter length of the secure send command requires
......@@ -897,28 +890,101 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
return err;
}
static bool btintel_firmware_version(struct hci_dev *hdev,
u8 num, u8 ww, u8 yy,
const struct firmware *fw,
u32 *boot_addr)
{
const u8 *fw_ptr;
fw_ptr = fw->data;
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)(fw_ptr);
/* Each SKU has a different reset parameter to use in the
* HCI_Intel_Reset command and it is embedded in the firmware
* data. So, instead of using static value per SKU, check
* the firmware data and save it for later use.
*/
if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
struct cmd_write_boot_params *params;
params = (void *)(fw_ptr + sizeof(*cmd));
bt_dev_info(hdev, "Boot Address: 0x%x",
le32_to_cpu(params->boot_addr));
bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
params->fw_build_num, params->fw_build_ww,
params->fw_build_yy);
return (num == params->fw_build_num &&
ww == params->fw_build_ww &&
yy == params->fw_build_yy);
}
fw_ptr += sizeof(*cmd) + cmd->plen;
}
return false;
}
int btintel_download_firmware(struct hci_dev *hdev,
struct intel_version *ver,
const struct firmware *fw,
u32 *boot_param)
{
int err;
/* SfP and WsP don't seem to update the firmware version on file
* so version checking is currently not possible.
*/
switch (ver->hw_variant) {
case 0x0b: /* SfP */
case 0x0c: /* WsP */
/* Skip version checking */
break;
default:
/* Skip download if firmware has the same version */
if (btintel_firmware_version(hdev, ver->fw_build_num,
ver->fw_build_ww, ver->fw_build_yy,
fw, boot_param)) {
bt_dev_info(hdev, "Firmware already loaded");
/* Return -EALREADY to indicate that the firmware has
* already been loaded.
*/
return -EALREADY;
}
}
err = btintel_sfi_rsa_header_secure_send(hdev, fw);
if (err)
return err;
return btintel_download_firmware_payload(hdev, fw, boot_param,
RSA_HEADER_LEN);
return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
}
EXPORT_SYMBOL_GPL(btintel_download_firmware);
int btintel_download_firmware_newgen(struct hci_dev *hdev,
struct intel_version_tlv *ver,
const struct firmware *fw, u32 *boot_param,
u8 hw_variant, u8 sbe_type)
{
int err;
u32 css_header_ver;
/* Skip download if firmware has the same version */
if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
ver->min_fw_build_cw, ver->min_fw_build_yy,
fw, boot_param)) {
bt_dev_info(hdev, "Firmware already loaded");
/* Return -EALREADY to indicate that firmware has already been
* loaded.
*/
return -EALREADY;
}
/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
* only RSA secure boot engine. Hence, the corresponding sfi file will
* have RSA header of 644 bytes followed by Command Buffer.
......@@ -948,7 +1014,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
if (err)
return err;
err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
if (err)
return err;
} else if (hw_variant >= 0x17) {
......@@ -969,7 +1035,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
return err;
err = btintel_download_firmware_payload(hdev, fw,
boot_param,
RSA_HEADER_LEN + ECDSA_HEADER_LEN);
if (err)
return err;
......@@ -979,7 +1044,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
return err;
err = btintel_download_firmware_payload(hdev, fw,
boot_param,
RSA_HEADER_LEN + ECDSA_HEADER_LEN);
if (err)
return err;
......
......@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
int btintel_read_boot_params(struct hci_dev *hdev,
struct intel_boot_params *params);
int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
u32 *boot_param);
int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
const struct firmware *fw, u32 *boot_param);
int btintel_download_firmware_newgen(struct hci_dev *hdev,
struct intel_version_tlv *ver,
const struct firmware *fw,
u32 *boot_param, u8 hw_variant,
u8 sbe_type);
......
......@@ -2557,10 +2557,17 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start firmware downloading and get boot parameter */
err = btintel_download_firmware_newgen(hdev, fw, boot_param,
err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
INTEL_HW_VARIANT(ver->cnvi_bt),
ver->sbe_type);
if (err < 0) {
if (err == -EALREADY) {
/* Firmware has already been loaded */
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
err = 0;
goto done;
}
/* When FW download fails, send Intel Reset to retry
* FW download.
*/
......@@ -2752,8 +2759,15 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start firmware downloading and get boot parameter */
err = btintel_download_firmware(hdev, fw, boot_param);
err = btintel_download_firmware(hdev, ver, fw, boot_param);
if (err < 0) {
if (err == -EALREADY) {
/* Firmware has already been loaded */
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
err = 0;
goto done;
}
/* When FW download fails, send Intel Reset to retry
* FW download.
*/
......
......@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
set_bit(STATE_DOWNLOADING, &intel->flags);
/* Start firmware downloading and get boot parameter */
err = btintel_download_firmware(hdev, fw, &boot_param);
err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
if (err < 0)
goto done;
......@@ -784,7 +784,10 @@ static int intel_setup(struct hci_uart *hu)
done:
release_firmware(fw);
if (err < 0)
/* Check if there was an error and if is not -EALREADY which means the
* firmware has already been loaded.
*/
if (err < 0 && err != -EALREADY)
return err;
/* We need to restore the default speed before Intel reset */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment