s390/amode31: use SYM* macros instead of ENTRY(), etc.

Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

arch/s390/kernel/text_amode31.S

@@ -27,7 +27,7 @@
 /*
  * int _diag14_amode31(unsigned long rx, unsigned long ry1, unsigned long subcode)
  */
-ENTRY(_diag14_amode31)
+SYM_FUNC_START(_diag14_amode31)
 	lgr	%r1,%r2
 	lgr	%r2,%r3
 	lgr	%r3,%r4
@@ -42,12 +42,12 @@ ENTRY(_diag14_amode31)
 	lgfr	%r2,%r5
 	BR_EX_AMODE31_r14
 	EX_TABLE_AMODE31(.Ldiag14_ex, .Ldiag14_fault)
-ENDPROC(_diag14_amode31)
+SYM_FUNC_END(_diag14_amode31)
 
 /*
  * int _diag210_amode31(struct diag210 *addr)
  */
-ENTRY(_diag210_amode31)
+SYM_FUNC_START(_diag210_amode31)
 	lgr	%r1,%r2
 	lhi	%r2,-1
 	sam31
@@ -60,12 +60,12 @@ ENTRY(_diag210_amode31)
 	lgfr	%r2,%r2
 	BR_EX_AMODE31_r14
 	EX_TABLE_AMODE31(.Ldiag210_ex, .Ldiag210_fault)
-ENDPROC(_diag210_amode31)
+SYM_FUNC_END(_diag210_amode31)
 
 /*
  * int diag8c(struct diag8c *addr, struct ccw_dev_id *devno, size_t len)
 */
-ENTRY(_diag8c_amode31)
+SYM_FUNC_START(_diag8c_amode31)
 	llgf	%r3,0(%r3)
 	sam31
 	diag	%r2,%r4,0x8c
@@ -74,11 +74,11 @@ ENTRY(_diag8c_amode31)
 	lgfr	%r2,%r3
 	BR_EX_AMODE31_r14
 	EX_TABLE_AMODE31(.Ldiag8c_ex, .Ldiag8c_ex)
-ENDPROC(_diag8c_amode31)
+SYM_FUNC_END(_diag8c_amode31)
 /*
  * int _diag26c_amode31(void *req, void *resp, enum diag26c_sc subcode)
  */
-ENTRY(_diag26c_amode31)
+SYM_FUNC_START(_diag26c_amode31)
 	lghi	%r5,-EOPNOTSUPP
 	sam31
 	diag	%r2,%r4,0x26c
@@ -87,42 +87,42 @@ ENTRY(_diag26c_amode31)
 	lgfr	%r2,%r5
 	BR_EX_AMODE31_r14
 	EX_TABLE_AMODE31(.Ldiag26c_ex, .Ldiag26c_ex)
-ENDPROC(_diag26c_amode31)
+SYM_FUNC_END(_diag26c_amode31)
 
 /*
  * void _diag0c_amode31(struct hypfs_diag0c_entry *entry)
  */
-ENTRY(_diag0c_amode31)
+SYM_FUNC_START(_diag0c_amode31)
 	sam31
 	diag	%r2,%r2,0x0c
 	sam64
 	BR_EX_AMODE31_r14
-ENDPROC(_diag0c_amode31)
+SYM_FUNC_END(_diag0c_amode31)
 
 /*
  * void _diag308_reset_amode31(void)
  *
  * Calls diag 308 subcode 1 and continues execution
  */
-ENTRY(_diag308_reset_amode31)
-	larl	%r4,.Lctlregs		# Save control registers
+SYM_FUNC_START(_diag308_reset_amode31)
+	larl	%r4,ctlregs		# Save control registers
 	stctg	%c0,%c15,0(%r4)
 	lg	%r2,0(%r4)		# Disable lowcore protection
 	nilh	%r2,0xefff
-	larl	%r4,.Lctlreg0
+	larl	%r4,ctlreg0
 	stg	%r2,0(%r4)
 	lctlg	%c0,%c0,0(%r4)
-	larl	%r4,.Lfpctl		# Floating point control register
+	larl	%r4,fpctl		# Floating point control register
 	stfpc	0(%r4)
-	larl	%r4,.Lprefix		# Save prefix register
+	larl	%r4,prefix		# Save prefix register
 	stpx	0(%r4)
-	larl	%r4,.Lprefix_zero	# Set prefix register to 0
+	larl	%r4,prefix_zero	# Set prefix register to 0
 	spx	0(%r4)
-	larl	%r4,.Lcontinue_psw	# Save PSW flags
+	larl	%r4,continue_psw	# Save PSW flags
 	epsw	%r2,%r3
 	stm	%r2,%r3,0(%r4)
 	larl	%r4,.Lrestart_part2	# Setup restart PSW at absolute 0
-	larl	%r3,.Lrestart_diag308_psw
+	larl	%r3,restart_diag308_psw
 	og	%r4,0(%r3)		# Save PSW
 	lghi	%r3,0
 	sturg	%r4,%r3			# Use sturg, because of large pages
@@ -134,39 +134,26 @@ ENTRY(_diag308_reset_amode31)
 	lhi	%r1,2			# Use mode 2 = ESAME (dump)
 	sigp	%r1,%r0,SIGP_SET_ARCHITECTURE	# Switch to ESAME mode
 	sam64				# Switch to 64 bit addressing mode
-	larl	%r4,.Lctlregs		# Restore control registers
+	larl	%r4,ctlregs		# Restore control registers
 	lctlg	%c0,%c15,0(%r4)
-	larl	%r4,.Lfpctl		# Restore floating point ctl register
+	larl	%r4,fpctl		# Restore floating point ctl register
 	lfpc	0(%r4)
-	larl	%r4,.Lprefix		# Restore prefix register
+	larl	%r4,prefix		# Restore prefix register
 	spx	0(%r4)
-	larl	%r4,.Lcontinue_psw	# Restore PSW flags
+	larl	%r4,continue_psw	# Restore PSW flags
 	larl	%r2,.Lcontinue
 	stg	%r2,8(%r4)
 	lpswe	0(%r4)
 .Lcontinue:
 	BR_EX_AMODE31_r14
-ENDPROC(_diag308_reset_amode31)
+SYM_FUNC_END(_diag308_reset_amode31)
 
 	.section .amode31.data,"aw",@progbits
-.align	8
-.Lrestart_diag308_psw:
-	.long	0x00080000,0x80000000
-
-.align 8
-.Lcontinue_psw:
-	.quad	0,0
-
-.align 8
-.Lctlreg0:
-	.quad	0
-.Lctlregs:
-	.rept	16
-	.quad	0
-	.endr
-.Lfpctl:
-	.long	0
-.Lprefix:
-	.long	0
-.Lprefix_zero:
-	.long	0
+	.balign	8
+SYM_DATA_LOCAL(restart_diag308_psw,	.long 0x00080000,0x80000000)
+SYM_DATA_LOCAL(continue_psw,		.quad 0,0)
+SYM_DATA_LOCAL(ctlreg0,			.quad 0)
+SYM_DATA_LOCAL(ctlregs,			.fill 16,8,0)
+SYM_DATA_LOCAL(fpctl,			.long 0)
+SYM_DATA_LOCAL(prefix,			.long 0)
+SYM_DATA_LOCAL(prefix_zero,		.long 0)