Commit ac1073a6 authored by Chun-Yeow Yeoh's avatar Chun-Yeow Yeoh Committed by Johannes Berg

{nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout

Add the mesh configuration parameters dot11MeshHWMProotInterval
and dot11MeshHWMPactivePathToRootTimeout to be used by
proactive PREQ mechanism.
Signed-off-by: default avatarChun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 73c3df3b
...@@ -2185,6 +2185,13 @@ enum nl80211_mntr_flags { ...@@ -2185,6 +2185,13 @@ enum nl80211_mntr_flags {
* *
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
* *
* @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
* which mesh STAs receiving a proactive PREQ shall consider the forwarding
* information to the root mesh STA to be valid.
*
* @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
* proactive PREQs are transmitted.
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/ */
enum nl80211_meshconf_params { enum nl80211_meshconf_params {
...@@ -2211,6 +2218,8 @@ enum nl80211_meshconf_params { ...@@ -2211,6 +2218,8 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_RSSI_THRESHOLD,
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
NL80211_MESHCONF_HT_OPMODE, NL80211_MESHCONF_HT_OPMODE,
NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
/* keep last */ /* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST, __NL80211_MESHCONF_ATTR_AFTER_LAST,
......
...@@ -842,6 +842,13 @@ struct bss_parameters { ...@@ -842,6 +842,13 @@ struct bss_parameters {
* @rssi_threshold: the threshold for average signal strength of candidate * @rssi_threshold: the threshold for average signal strength of candidate
* station to establish a peer link * station to establish a peer link
* @ht_opmode: mesh HT protection mode * @ht_opmode: mesh HT protection mode
*
* @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
* receiving a proactive PREQ shall consider the forwarding information to
* the root mesh STA to be valid.
*
* @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
* PREQs are transmitted.
*/ */
struct mesh_config { struct mesh_config {
u16 dot11MeshRetryTimeout; u16 dot11MeshRetryTimeout;
...@@ -866,6 +873,8 @@ struct mesh_config { ...@@ -866,6 +873,8 @@ struct mesh_config {
bool dot11MeshForwarding; bool dot11MeshForwarding;
s32 rssi_threshold; s32 rssi_threshold;
u16 ht_opmode; u16 ht_opmode;
u32 dot11MeshHWMPactivePathToRootTimeout;
u16 dot11MeshHWMProotInterval;
}; };
/** /**
......
...@@ -1590,6 +1590,12 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, ...@@ -1590,6 +1590,12 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode; sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
} }
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathToRootTimeout =
nconf->dot11MeshHWMPactivePathToRootTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask))
conf->dot11MeshHWMProotInterval =
nconf->dot11MeshHWMProotInterval;
return 0; return 0;
} }
......
...@@ -510,6 +510,10 @@ IEEE80211_IF_FILE(dot11MeshHWMPRannInterval, ...@@ -510,6 +510,10 @@ IEEE80211_IF_FILE(dot11MeshHWMPRannInterval,
IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC); IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC);
IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC); IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC);
IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC); IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout,
u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMProotInterval,
u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
#endif #endif
#define DEBUGFS_ADD_MODE(name, mode) \ #define DEBUGFS_ADD_MODE(name, mode) \
...@@ -611,6 +615,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) ...@@ -611,6 +615,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
MESHPARAMS_ADD(dot11MeshGateAnnouncementProtocol); MESHPARAMS_ADD(dot11MeshGateAnnouncementProtocol);
MESHPARAMS_ADD(rssi_threshold); MESHPARAMS_ADD(rssi_threshold);
MESHPARAMS_ADD(ht_opmode); MESHPARAMS_ADD(ht_opmode);
MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
MESHPARAMS_ADD(dot11MeshHWMProotInterval);
#undef MESHPARAMS_ADD #undef MESHPARAMS_ADD
} }
#endif #endif
......
...@@ -14,6 +14,8 @@ ...@@ -14,6 +14,8 @@
#define MESH_PATH_TIMEOUT 5000 #define MESH_PATH_TIMEOUT 5000
#define MESH_RANN_INTERVAL 5000 #define MESH_RANN_INTERVAL 5000
#define MESH_PATH_TO_ROOT_TIMEOUT 6000
#define MESH_ROOT_INTERVAL 5000
/* /*
* Minimum interval between two consecutive PREQs originated by the same * Minimum interval between two consecutive PREQs originated by the same
...@@ -62,6 +64,8 @@ const struct mesh_config default_mesh_config = { ...@@ -62,6 +64,8 @@ const struct mesh_config default_mesh_config = {
.dot11MeshForwarding = true, .dot11MeshForwarding = true,
.rssi_threshold = MESH_RSSI_THRESHOLD, .rssi_threshold = MESH_RSSI_THRESHOLD,
.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
}; };
const struct mesh_setup default_mesh_setup = { const struct mesh_setup default_mesh_setup = {
......
...@@ -3469,7 +3469,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, ...@@ -3469,7 +3469,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD, nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
cur_params.rssi_threshold) || cur_params.rssi_threshold) ||
nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE, nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
cur_params.ht_opmode)) cur_params.ht_opmode) ||
nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
cur_params.dot11MeshHWMPactivePathToRootTimeout) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
cur_params.dot11MeshHWMProotInterval))
goto nla_put_failure; goto nla_put_failure;
nla_nest_end(msg, pinfoattr); nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr); genlmsg_end(msg, hdr);
...@@ -3505,6 +3509,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A ...@@ -3505,6 +3509,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 }, [NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 }, [NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 }, [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
}; };
static const struct nla_policy static const struct nla_policy
...@@ -3612,6 +3618,13 @@ do {\ ...@@ -3612,6 +3618,13 @@ do {\
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
mask, NL80211_MESHCONF_HT_OPMODE, mask, NL80211_MESHCONF_HT_OPMODE,
nla_get_u16); nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout,
mask,
NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval,
mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
nla_get_u16);
if (mask_out) if (mask_out)
*mask_out = mask; *mask_out = mask;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment