Commit ac3d3735 authored by Andre Przywara's avatar Andre Przywara Committed by Christoffer Dall

arm/arm64: KVM: allow userland to request a virtual GICv3

With all of the GICv3 code in place now we allow userland to ask the
kernel for using a virtual GICv3 in the guest.
Also we provide the necessary support for guests setting the memory
addresses for the virtual distributor and redistributors.
This requires some userland code to make use of that feature and
explicitly ask for a virtual GICv3.
Document that KVM_CREATE_IRQCHIP only works for GICv2, but is
considered legacy and using KVM_CREATE_DEVICE is preferred.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
parent b5d84ff6
......@@ -612,11 +612,14 @@ Type: vm ioctl
Parameters: none
Returns: 0 on success, -1 on error
Creates an interrupt controller model in the kernel. On x86, creates a virtual
ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
only go to the IOAPIC. On ARM/arm64, a GIC is
created. On s390, a dummy irq routing table is created.
Creates an interrupt controller model in the kernel.
On x86, creates a virtual ioapic, a virtual PIC (two PICs, nested), and sets up
future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both
PIC and IOAPIC; GSI 16-23 only go to the IOAPIC.
On ARM/arm64, a GICv2 is created. Any other GIC versions require the usage of
KVM_CREATE_DEVICE, which also supports creating a GICv2. Using
KVM_CREATE_DEVICE is preferred over KVM_CREATE_IRQCHIP for GICv2.
On s390, a dummy irq routing table is created.
Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
before KVM_CREATE_IRQCHIP can be used.
......
......@@ -3,22 +3,38 @@ ARM Virtual Generic Interrupt Controller (VGIC)
Device types supported:
KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0
KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0
Only one VGIC instance may be instantiated through either this API or the
legacy KVM_CREATE_IRQCHIP api. The created VGIC will act as the VM interrupt
controller, requiring emulated user-space devices to inject interrupts to the
VGIC instead of directly to CPUs.
Creating a guest GICv3 device requires a host GICv3 as well.
GICv3 implementations with hardware compatibility support allow a guest GICv2
as well.
Groups:
KVM_DEV_ARM_VGIC_GRP_ADDR
Attributes:
KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit)
Base address in the guest physical address space of the GIC distributor
register mappings.
register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit)
Base address in the guest physical address space of the GIC virtual cpu
interface register mappings.
interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit)
Base address in the guest physical address space of the GICv3 distributor
register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit)
Base address in the guest physical address space of the GICv3
redistributor register mappings. There are two 64K pages for each
VCPU and all of the redistributor pages are contiguous.
Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
KVM_DEV_ARM_VGIC_GRP_DIST_REGS
Attributes:
......@@ -36,6 +52,7 @@ Groups:
the register.
Limitations:
- Priorities are not implemented, and registers are RAZ/WI
- Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
Errors:
-ENODEV: Getting or setting this register is not yet supported
-EBUSY: One or more VCPUs are running
......@@ -68,6 +85,7 @@ Groups:
Limitations:
- Priorities are not implemented, and registers are RAZ/WI
- Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.
Errors:
-ENODEV: Getting or setting this register is not yet supported
-EBUSY: One or more VCPUs are running
......
......@@ -78,6 +78,13 @@ struct kvm_regs {
#define KVM_VGIC_V2_DIST_SIZE 0x1000
#define KVM_VGIC_V2_CPU_SIZE 0x2000
/* Supported VGICv3 address types */
#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
#define KVM_VGIC_V3_DIST_SIZE SZ_64K
#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
#define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */
#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
......
......@@ -36,8 +36,8 @@
#define VGIC_V2_MAX_CPUS 8
/* Sanity checks... */
#if (KVM_MAX_VCPUS > 8)
#error Invalid number of CPU interfaces
#if (KVM_MAX_VCPUS > 255)
#error Too many KVM VCPUs, the VGIC only supports up to 255 VCPUs for now
#endif
#if (VGIC_NR_IRQS_LEGACY & 31)
......
......@@ -1007,6 +1007,9 @@ static int vgic_v3_has_attr(struct kvm_device *dev,
case KVM_VGIC_V2_ADDR_TYPE_DIST:
case KVM_VGIC_V2_ADDR_TYPE_CPU:
return -ENXIO;
case KVM_VGIC_V3_ADDR_TYPE_DIST:
case KVM_VGIC_V3_ADDR_TYPE_REDIST:
return 0;
}
break;
case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
......
......@@ -1667,7 +1667,7 @@ static int vgic_ioaddr_assign(struct kvm *kvm, phys_addr_t *ioaddr,
/**
* kvm_vgic_addr - set or get vgic VM base addresses
* @kvm: pointer to the vm struct
* @type: the VGIC addr type, one of KVM_VGIC_V2_ADDR_TYPE_XXX
* @type: the VGIC addr type, one of KVM_VGIC_V[23]_ADDR_TYPE_XXX
* @addr: pointer to address value
* @write: if true set the address in the VM address space, if false read the
* address
......@@ -1681,29 +1681,49 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
{
int r = 0;
struct vgic_dist *vgic = &kvm->arch.vgic;
int type_needed;
phys_addr_t *addr_ptr, block_size;
mutex_lock(&kvm->lock);
switch (type) {
case KVM_VGIC_V2_ADDR_TYPE_DIST:
if (write) {
r = vgic_ioaddr_assign(kvm, &vgic->vgic_dist_base,
*addr, KVM_VGIC_V2_DIST_SIZE);
} else {
*addr = vgic->vgic_dist_base;
}
type_needed = KVM_DEV_TYPE_ARM_VGIC_V2;
addr_ptr = &vgic->vgic_dist_base;
block_size = KVM_VGIC_V2_DIST_SIZE;
break;
case KVM_VGIC_V2_ADDR_TYPE_CPU:
if (write) {
r = vgic_ioaddr_assign(kvm, &vgic->vgic_cpu_base,
*addr, KVM_VGIC_V2_CPU_SIZE);
} else {
*addr = vgic->vgic_cpu_base;
}
type_needed = KVM_DEV_TYPE_ARM_VGIC_V2;
addr_ptr = &vgic->vgic_cpu_base;
block_size = KVM_VGIC_V2_CPU_SIZE;
break;
#ifdef CONFIG_ARM_GIC_V3
case KVM_VGIC_V3_ADDR_TYPE_DIST:
type_needed = KVM_DEV_TYPE_ARM_VGIC_V3;
addr_ptr = &vgic->vgic_dist_base;
block_size = KVM_VGIC_V3_DIST_SIZE;
break;
case KVM_VGIC_V3_ADDR_TYPE_REDIST:
type_needed = KVM_DEV_TYPE_ARM_VGIC_V3;
addr_ptr = &vgic->vgic_redist_base;
block_size = KVM_VGIC_V3_REDIST_SIZE;
break;
#endif
default:
r = -ENODEV;
goto out;
}
if (vgic->vgic_model != type_needed) {
r = -ENODEV;
goto out;
}
if (write)
r = vgic_ioaddr_assign(kvm, addr_ptr, *addr, block_size);
else
*addr = *addr_ptr;
out:
mutex_unlock(&kvm->lock);
return r;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment