greybus: interface: clean up ES2 VID/PID hack

Clean up the ES2 VID/PID hack using a new quirk flag.

Note that the hack is now used if and only if the interface is a Toshiba
ES2 bridge (and not if the attributes read zero).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

drivers/staging/greybus/firmware.c

@@ -43,14 +43,7 @@ static void firmware_es2_fixup_vid_pid(struct gb_firmware *firmware)
 	struct gb_interface *intf = connection->bundle->intf;
 	int ret;
 
-	/*
-	 * Use VID/PID specified at hotplug if:
-	 * - Bridge ASIC chip isn't ES2
-	 * - Received non-zero Vendor/Product ids
-	 */
-	if (intf->ddbl1_manufacturer_id != ES2_DDBL1_MFR_ID ||
-	    intf->ddbl1_product_id != ES2_DDBL1_PROD_ID ||
-	    intf->vendor_id != 0 || intf->product_id != 0)
+	if (!(intf->quirks & GB_INTERFACE_QUIRK_NO_ARA_IDS))
 		return;
 
 	ret = gb_operation_sync(connection, GB_FIRMWARE_TYPE_GET_VID_PID,

drivers/staging/greybus/greybus_protocols.h

@@ -226,10 +226,6 @@ struct gb_control_timesync_authoritative_request {
 #define GB_FIRMWARE_TYPE_AP_READY		0x05	/* Request with no-payload */
 #define GB_FIRMWARE_TYPE_GET_VID_PID		0x06	/* Request with no-payload */
 
-/* FIXME: remove all ES2-specific identifiers from the kernel */
-#define ES2_DDBL1_MFR_ID	0x00000126
-#define ES2_DDBL1_PROD_ID	0x00001000
-
 /* Greybus firmware boot stages */
 #define GB_FIRMWARE_BOOT_STAGE_ONE		0x01 /* Reserved for the boot ROM */
 #define GB_FIRMWARE_BOOT_STAGE_TWO		0x02 /* Firmware package to be loaded by the boot ROM */

drivers/staging/greybus/interface.c

@@ -80,6 +80,7 @@ static int gb_interface_read_dme(struct gb_interface *intf)
 
 	if (intf->ddbl1_manufacturer_id == TOSHIBA_DMID &&
 			intf->ddbl1_product_id == TOSHIBA_ES2_BRIDGE_DPID) {
+		intf->quirks |= GB_INTERFACE_QUIRK_NO_ARA_IDS;
 		intf->quirks |= GB_INTERFACE_QUIRK_NO_INIT_STATUS;
 	}
 

drivers/staging/greybus/interface.h

@@ -13,6 +13,7 @@
 #define GB_INTERFACE_QUIRK_NO_CPORT_FEATURES		BIT(0)
 #define GB_INTERFACE_QUIRK_NO_INTERFACE_VERSION		BIT(1)
 #define GB_INTERFACE_QUIRK_NO_INIT_STATUS		BIT(2)
+#define GB_INTERFACE_QUIRK_NO_ARA_IDS			BIT(3)
 
 struct gb_interface {
 	struct device dev;

drivers/staging/greybus/svc.c

@@ -426,11 +426,7 @@ static void gb_svc_process_intf_hotplug(struct gb_operation *operation)
 
 	intf = gb_interface_find(hd, intf_id);
 	if (intf) {
-		/*
-		 * For ES2, we need to maintain the same vendor/product ids we
-		 * got from bootrom, otherwise userspace can't distinguish
-		 * between modules.
-		 */
+		/* HACK: Save Ara VID/PID for ES2 hack below */
 		vendor_id = intf->vendor_id;
 		product_id = intf->product_id;
 
@@ -468,15 +464,11 @@ static void gb_svc_process_intf_hotplug(struct gb_operation *operation)
 	}
 
 	/*
-	 * Use VID/PID specified at hotplug if:
-	 * - Bridge ASIC chip isn't ES2
-	 * - Received non-zero Vendor/Product ids
+	 * HACK: Use Ara VID/PID from earlier boot stage.
 	 *
-	 * Otherwise, use the ids we received from bootrom.
+	 * FIXME: remove quirk with ES2 support
 	 */
-	if (intf->ddbl1_manufacturer_id == ES2_DDBL1_MFR_ID &&
-	    intf->ddbl1_product_id == ES2_DDBL1_PROD_ID &&
-	    intf->vendor_id == 0 && intf->product_id == 0) {
+	if (intf->quirks & GB_INTERFACE_QUIRK_NO_ARA_IDS) {
 		intf->vendor_id = vendor_id;
 		intf->product_id = product_id;
 	}