Commit ac84b8b2 authored by Dan Murphy's avatar Dan Murphy Committed by Mark Brown

ASoc: Add Texas Instruments TAS2562 amplifier binding

Add the DT binding for the TAS2562 amplifier.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191008181517.5332-1-dmurphy@ti.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ad4abed3
Texas Instruments TAS2562 Smart PA
The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
efficiently driving high peak power into small loudspeakers.
Integrated speaker voltage and current sense provides for
real time monitoring of loudspeaker behavior.
Required properties:
- #address-cells - Should be <1>.
- #size-cells - Should be <0>.
- compatible: - Should contain "ti,tas2562".
- reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- ti,imon-slot-no:- TDM TX current sense time slot.
Optional properties:
- interrupt-parent: phandle to the interrupt controller which provides
the interrupt.
- interrupts: (GPIO) interrupt to which the chip is connected.
- shut-down: GPIO used to control the state of the device.
Examples:
tas2562@4c {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tas2562";
reg = <0x4c>;
interrupt-parent = <&gpio1>;
interrupts = <14>;
shut-down = <&gpio1 15 0>;
ti,imon-slot-no = <0>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment