Commit ac8fd122 authored by afzal mohammed's avatar afzal mohammed Committed by Thomas Bogendoerfer

MIPS: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

remove_irq() has been replaced by free_irq() as well.

There were build error's during previous version, couple of which was
reported by kbuild test robot <lkp@intel.com> of which one was reported
by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a
few more issues including build errors, those also have been fixed.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by: default avatarafzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
parent 792a402c
......@@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.cpumask = cpu_possible_mask,
};
static struct irqaction au1x_rtcmatch2_irqaction = {
.handler = au1x_rtcmatch2_irq,
.flags = IRQF_TIMER,
.name = "timer",
.dev_id = &au1x_rtcmatch2_clockdev,
};
static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
......@@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
cd->min_delta_ns = clockevent_delta2ns(9, cd);
cd->min_delta_ticks = 9; /* ~0.28ms */
clockevents_register_device(cd);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);
if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
&au1x_rtcmatch2_clockdev))
pr_err("Failed to register timer interrupt\n");
printk(KERN_INFO "Alchemy clocksource installed\n");
......
......@@ -83,12 +83,6 @@ static struct irq_chip ar7_sec_irq_type = {
.irq_ack = ar7_ack_sec_irq,
};
static struct irqaction ar7_cascade_action = {
.handler = no_action,
.name = "AR7 cascade interrupt",
.flags = IRQF_NO_THREAD,
};
static void __init ar7_irq_init(int base)
{
int i;
......@@ -116,8 +110,14 @@ static void __init ar7_irq_init(int base)
handle_level_irq);
}
setup_irq(2, &ar7_cascade_action);
setup_irq(ar7_irq_base, &ar7_cascade_action);
if (request_irq(2, no_action, IRQF_NO_THREAD, "AR7 cascade interrupt",
NULL))
pr_err("Failed to request irq 2 (AR7 cascade interrupt)\n");
if (request_irq(ar7_irq_base, no_action, IRQF_NO_THREAD,
"AR7 cascade interrupt", NULL)) {
pr_err("Failed to request irq %d (AR7 cascade interrupt)\n",
ar7_irq_base);
}
set_c0_status(IE_IRQ0);
}
......
......@@ -64,11 +64,6 @@ static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ar2315_ahb_err_interrupt = {
.handler = ar2315_ahb_err_handler,
.name = "ar2315-ahb-error",
};
static void ar2315_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
......@@ -159,7 +154,9 @@ void __init ar2315_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
setup_irq(irq, &ar2315_ahb_err_interrupt);
if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
NULL))
pr_err("Failed to register ar2315-ahb-error interrupt\n");
irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
ar2315_misc_irq_handler, domain);
......
......@@ -68,11 +68,6 @@ static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ar5312_ahb_err_interrupt = {
.handler = ar5312_ahb_err_handler,
.name = "ar5312-ahb-error",
};
static void ar5312_misc_irq_handler(struct irq_desc *desc)
{
u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
......@@ -154,7 +149,9 @@ void __init ar5312_arch_init_irq(void)
panic("Failed to add IRQ domain");
irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
setup_irq(irq, &ar5312_ahb_err_interrupt);
if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
NULL))
pr_err("Failed to register ar5312-ahb-error interrupt\n");
irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
ar5312_misc_irq_handler, domain);
......
......@@ -399,26 +399,6 @@ static struct irq_chip bcm63xx_external_irq_chip = {
.irq_set_type = bcm63xx_external_irq_set_type,
};
static struct irqaction cpu_ip2_cascade_action = {
.handler = no_action,
.name = "cascade_ip2",
.flags = IRQF_NO_THREAD,
};
#ifdef CONFIG_SMP
static struct irqaction cpu_ip3_cascade_action = {
.handler = no_action,
.name = "cascade_ip3",
.flags = IRQF_NO_THREAD,
};
#endif
static struct irqaction cpu_ext_cascade_action = {
.handler = no_action,
.name = "cascade_extirq",
.flags = IRQF_NO_THREAD,
};
static void bcm63xx_init_irq(void)
{
int irq_bits;
......@@ -531,7 +511,7 @@ static void bcm63xx_init_irq(void)
void __init arch_init_irq(void)
{
int i;
int i, irq;
bcm63xx_init_irq();
mips_cpu_irq_init();
......@@ -544,14 +524,25 @@ void __init arch_init_irq(void)
handle_edge_irq);
if (!is_ext_irq_cascaded) {
for (i = 3; i < 3 + ext_irq_count; ++i)
setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
for (i = 3; i < 3 + ext_irq_count; ++i) {
irq = MIPS_CPU_IRQ_BASE + i;
if (request_irq(irq, no_action, IRQF_NO_THREAD,
"cascade_extirq", NULL)) {
pr_err("Failed to request irq %d (cascade_extirq)\n",
irq);
}
}
}
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade_ip2", NULL))
pr_err("Failed to request irq %d (cascade_ip2)\n", irq);
#ifdef CONFIG_SMP
if (is_ext_irq_cascaded) {
setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
irq = MIPS_CPU_IRQ_BASE + 3;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade_ip3",
NULL))
pr_err("Failed to request irq %d (cascade_ip3)\n", irq);
bcm63xx_internal_irq_chip.irq_set_affinity =
bcm63xx_internal_set_affinity;
......
......@@ -45,18 +45,20 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
gt641xx_irq_init();
init_i8259_irqs();
setup_irq(GT641XX_CASCADE_IRQ, &cascade);
setup_irq(I8259_CASCADE_IRQ, &cascade);
if (request_irq(GT641XX_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
"cascade", NULL)) {
pr_err("Failed to request irq %d (cascade)\n",
GT641XX_CASCADE_IRQ);
}
if (request_irq(I8259_CASCADE_IRQ, no_action, IRQF_NO_THREAD,
"cascade", NULL)) {
pr_err("Failed to request irq %d (cascade)\n",
I8259_CASCADE_IRQ);
}
}
......@@ -103,28 +103,8 @@ int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2] = {
int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
int *fpu_kstat_irq;
static struct irqaction ioirq = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction fpuirq = {
.handler = no_action,
.name = "fpu",
.flags = IRQF_NO_THREAD,
};
static struct irqaction busirq = {
.name = "bus error",
.flags = IRQF_NO_THREAD,
};
static struct irqaction haltirq = {
.handler = dec_intr_halt,
.name = "halt",
.flags = IRQF_NO_THREAD,
};
static irq_handler_t busirq_handler;
static unsigned int busirq_flags = IRQF_NO_THREAD;
/*
* Bus error (DBE/IBE exceptions and bus interrupts) handling setup.
......@@ -134,21 +114,21 @@ static void __init dec_be_init(void)
switch (mips_machtype) {
case MACH_DS23100: /* DS2100/DS3100 Pmin/Pmax */
board_be_handler = dec_kn01_be_handler;
busirq.handler = dec_kn01_be_interrupt;
busirq.flags |= IRQF_SHARED;
busirq_handler = dec_kn01_be_interrupt;
busirq_flags |= IRQF_SHARED;
dec_kn01_be_init();
break;
case MACH_DS5000_1XX: /* DS5000/1xx 3min */
case MACH_DS5000_XX: /* DS5000/xx Maxine */
board_be_handler = dec_kn02xa_be_handler;
busirq.handler = dec_kn02xa_be_interrupt;
busirq_handler = dec_kn02xa_be_interrupt;
dec_kn02xa_be_init();
break;
case MACH_DS5000_200: /* DS5000/200 3max */
case MACH_DS5000_2X0: /* DS5000/240 3max+ */
case MACH_DS5900: /* DS5900 bigmax */
board_be_handler = dec_ecc_be_handler;
busirq.handler = dec_ecc_be_interrupt;
busirq_handler = dec_ecc_be_interrupt;
dec_ecc_be_init();
break;
}
......@@ -764,20 +744,29 @@ void __init arch_init_irq(void)
int irq_fpu;
irq_fpu = dec_interrupt[DEC_IRQ_FPU];
setup_irq(irq_fpu, &fpuirq);
if (request_irq(irq_fpu, no_action, IRQF_NO_THREAD, "fpu",
NULL))
pr_err("Failed to register fpu interrupt\n");
desc_fpu = irq_to_desc(irq_fpu);
fpu_kstat_irq = this_cpu_ptr(desc_fpu->kstat_irqs);
}
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_CASCADE], &ioirq);
if (dec_interrupt[DEC_IRQ_CASCADE] >= 0) {
if (request_irq(dec_interrupt[DEC_IRQ_CASCADE], no_action,
IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to register cascade interrupt\n");
}
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq.handler)
setup_irq(dec_interrupt[DEC_IRQ_BUS], &busirq);
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
busirq_flags, "bus error", NULL))
pr_err("Failed to register bus error interrupt\n");
}
/* Register the HALT interrupt. */
if (dec_interrupt[DEC_IRQ_HALT] >= 0)
setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq);
if (dec_interrupt[DEC_IRQ_HALT] >= 0) {
if (request_irq(dec_interrupt[DEC_IRQ_HALT], dec_intr_halt,
IRQF_NO_THREAD, "halt", NULL))
pr_err("Failed to register halt interrupt\n");
}
}
asmlinkage unsigned int dec_irq_dispatch(unsigned int irq)
......
......@@ -153,14 +153,6 @@ void emma2rh_gpio_irq_init(void)
handle_edge_irq, "edge");
}
static struct irqaction irq_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "cascade",
.dev_id = NULL,
.next = NULL,
};
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
......@@ -236,6 +228,7 @@ void emma2rh_irq_dispatch(void)
void __init arch_init_irq(void)
{
u32 reg;
int irq;
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
......@@ -272,9 +265,15 @@ void __init arch_init_irq(void)
mips_cpu_irq_init();
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}
asmlinkage void plat_irq_dispatch(void)
......
......@@ -11,6 +11,8 @@
#ifndef __ASM_SNI_H
#define __ASM_SNI_H
#include <linux/irqreturn.h>
extern unsigned int sni_brd_type;
#define SNI_BRD_10 2
......@@ -239,6 +241,6 @@ static inline int sni_eisa_root_init(void)
/* common irq stuff */
extern void (*sni_hwint)(void);
extern struct irqaction sni_isa_irq;
extern irqreturn_t sni_isa_irq_handler(int dummy, void *p);
#endif /* __ASM_SNI_H */
......@@ -125,24 +125,18 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction r4030_timer_irqaction = {
.handler = r4030_timer_interrupt,
.flags = IRQF_TIMER,
.name = "R4030 timer",
};
void __init plat_time_init(void)
{
struct clock_event_device *cd = &r4030_clockevent;
struct irqaction *action = &r4030_timer_irqaction;
unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
cd->cpumask = cpumask_of(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(JAZZ_TIMER_IRQ, action);
if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
"R4030 timer", cd))
pr_err("Failed to register R4030 timer interrupt\n");
/*
* Set clock to 100Hz.
......
......@@ -91,16 +91,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
......@@ -133,11 +132,7 @@ void sb1480_clockevent_init(void)
bcm1480_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
irq_set_affinity(irq, cpumask_of(cpu));
setup_irq(irq, action);
if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
pr_err("Failed to request irq %d (%s)\n", irq, name);
}
......@@ -100,14 +100,9 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ds1287_irqaction = {
.handler = ds1287_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "ds1287",
};
int __init ds1287_clockevent_init(int irq)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
struct clock_event_device *cd;
cd = &ds1287_clockevent;
......@@ -122,5 +117,5 @@ int __init ds1287_clockevent_init(int irq)
clockevents_register_device(&ds1287_clockevent);
return setup_irq(irq, &ds1287_irqaction);
return request_irq(irq, ds1287_interrupt, flags, "ds1287", NULL);
}
......@@ -120,12 +120,6 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction gt641xx_timer0_irqaction = {
.handler = gt641xx_timer0_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "gt641xx_timer0",
};
static int __init gt641xx_timer0_clockevent_init(void)
{
struct clock_event_device *cd;
......@@ -146,6 +140,7 @@ static int __init gt641xx_timer0_clockevent_init(void)
clockevents_register_device(&gt641xx_timer0_clockevent);
return setup_irq(GT641XX_TIMER0_IRQ, &gt641xx_timer0_irqaction);
return request_irq(GT641XX_TIMER0_IRQ, gt641xx_timer0_interrupt,
IRQF_PERCPU | IRQF_TIMER, "gt641xx_timer0", NULL);
}
arch_initcall(gt641xx_timer0_clockevent_init);
......@@ -252,6 +252,7 @@ unsigned int __weak get_c0_compare_int(void)
int r4k_clockevent_init(void)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq, min_delta;
......@@ -291,7 +292,8 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
setup_irq(irq, &c0_compare_irqaction);
if (request_irq(irq, c0_compare_interrupt, flags, "timer", NULL))
pr_err("Failed to request irq %d (timer)\n", irq);
return 0;
}
......
......@@ -90,16 +90,15 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void sb1250_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
/* Only have 4 general purpose timers, and we use last one as hpt */
BUG_ON(cpu > 2);
......@@ -133,11 +132,7 @@ void sb1250_clockevent_init(void)
sb1250_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
irq_set_affinity(irq, cpumask_of(cpu));
setup_irq(irq, action);
if (request_irq(irq, sibyte_counter_handler, flags, name, cd))
pr_err("Failed to request irq %d (%s)\n", irq, name);
}
......@@ -174,13 +174,6 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction txx9tmr_irq = {
.handler = txx9tmr_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "txx9tmr",
.dev_id = &txx9_clock_event_device,
};
void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
unsigned int imbusclk)
{
......@@ -202,7 +195,9 @@ void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
cd->irq = irq;
cd->cpumask = cpumask_of(0),
clockevents_register_device(cd);
setup_irq(irq, &txx9tmr_irq);
if (request_irq(irq, txx9tmr_interrupt, IRQF_PERCPU | IRQF_TIMER,
"txx9tmr", &txx9_clock_event_device))
pr_err("Failed to request irq %d (txx9tmr)\n", irq);
printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
baseaddr, irq);
}
......
......@@ -18,16 +18,13 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
void __init setup_pit_timer(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
clockevent_i8253_init(true);
setup_irq(0, &irq0);
if (request_irq(0, timer_interrupt, flags, "timer", NULL))
pr_err("Failed to request irq 0 (timer)\n");
}
static int __init init_pit_clocksource(void)
......
......@@ -51,11 +51,6 @@ static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction rtlx_irq = {
.handler = rtlx_interrupt,
.name = "RTLX",
};
static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
void _interrupt_sp(void)
......@@ -124,8 +119,7 @@ int __init rtlx_module_init(void)
goto out_class;
}
rtlx_irq.dev_id = rtlx;
err = setup_irq(rtlx_irq_num, &rtlx_irq);
err = request_irq(rtlx_irq_num, rtlx_interrupt, 0, "RTLX", rtlx);
if (err)
goto out_class;
......
......@@ -207,25 +207,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI call"
};
static void smp_ipi_init_one(unsigned int virq,
struct irqaction *action)
static void smp_ipi_init_one(unsigned int virq, const char *name,
irq_handler_t handler)
{
int ret;
irq_set_handler(virq, handle_percpu_irq);
ret = setup_irq(virq, action);
ret = request_irq(virq, handler, IRQF_PERCPU, name, NULL);
BUG_ON(ret);
}
......@@ -278,12 +266,15 @@ int mips_smp_ipi_allocate(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
smp_ipi_init_one(call_virq + cpu, &irq_call);
smp_ipi_init_one(sched_virq + cpu, &irq_resched);
smp_ipi_init_one(call_virq + cpu, "IPI call",
ipi_call_interrupt);
smp_ipi_init_one(sched_virq + cpu, "IPI resched",
ipi_resched_interrupt);
}
} else {
smp_ipi_init_one(call_virq, &irq_call);
smp_ipi_init_one(sched_virq, &irq_resched);
smp_ipi_init_one(call_virq, "IPI call", ipi_call_interrupt);
smp_ipi_init_one(sched_virq, "IPI resched",
ipi_resched_interrupt);
}
return 0;
......@@ -311,8 +302,8 @@ int mips_smp_ipi_free(const struct cpumask *mask)
int cpu;
for_each_cpu(cpu, mask) {
remove_irq(call_virq + cpu, &irq_call);
remove_irq(sched_virq + cpu, &irq_resched);
free_irq(call_virq + cpu, NULL);
free_irq(sched_virq + cpu, NULL);
}
}
irq_destroy_ipi(call_virq, mask);
......
......@@ -90,14 +90,9 @@ asmlinkage void plat_irq_dispatch(void)
}
}
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
{
int irq = LASAT_CASCADE_IRQ;
int i;
if (IS_LASAT_200()) {
......@@ -119,5 +114,6 @@ void __init arch_init_irq(void)
for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
setup_irq(LASAT_CASCADE_IRQ, &cascade);
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}
......@@ -30,11 +30,6 @@ static struct irq_chip bonito_irq_type = {
.irq_unmask = bonito_irq_enable,
};
static struct irqaction __maybe_unused dma_timeout_irqaction = {
.handler = no_action,
.name = "dma_timeout",
};
void bonito_irq_init(void)
{
u32 i;
......@@ -44,6 +39,8 @@ void bonito_irq_init(void)
handle_level_irq);
#ifdef CONFIG_CPU_LOONGSON2E
setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
i = LOONGSON_IRQ_BASE + 10;
if (request_irq(i, no_action, 0, "dma_timeout", NULL))
pr_err("Failed to request irq %d (dma_timeout)\n", i);
#endif
}
......@@ -100,12 +100,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq5 = {
.handler = timer_interrupt,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
/*
* Initialize the conversion factor and the min/max deltas of the clock event
* structure and register the clock event source with the framework.
......@@ -134,7 +128,9 @@ void __init setup_mfgpt0_timer(void)
clockevents_register_device(cd);
setup_irq(CS5536_MFGPT_INTR, &irq5);
if (request_irq(CS5536_MFGPT_INTR, timer_interrupt,
IRQF_NOBALANCING | IRQF_TIMER, "timer", NULL))
pr_err("Failed to register timer interrupt\n");
}
/*
......
......@@ -35,14 +35,10 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
spurious_interrupt();
}
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
void __init mach_init_irq(void)
{
int irq;
/* init all controller
* 0-15 ------> i8259 interrupt
* 16-23 ------> mips cpu interrupt
......@@ -59,7 +55,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* bonito irq at IP2 */
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
irq = MIPS_CPU_IRQ_BASE + 2;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
/* 8259 irq at IP5 */
setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
irq = MIPS_CPU_IRQ_BASE + 5;
if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", irq);
}
......@@ -90,18 +90,6 @@ static irqreturn_t ip6_action(int cpl, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ip6_irqaction = {
.handler = ip6_action,
.name = "cascade",
.flags = IRQF_SHARED | IRQF_NO_THREAD,
};
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD | IRQF_NO_SUSPEND,
};
void __init mach_init_irq(void)
{
/* init all controller
......@@ -120,7 +108,11 @@ void __init mach_init_irq(void)
bonito_irq_init();
/* setup north bridge irq (bonito) */
setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to register north bridge cascade interrupt\n");
/* setup source bridge irq (i8259) */
setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
IRQF_NO_THREAD | IRQF_NO_SUSPEND, "cascade", NULL))
pr_err("Failed to register south bridge cascade interrupt\n");
}
......@@ -149,12 +149,6 @@ asmlinkage void plat_irq_dispatch(void)
}
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static void __init ls1x_irq_init(int base)
{
int n;
......@@ -176,12 +170,17 @@ static void __init ls1x_irq_init(int base)
handle_level_irq);
}
setup_irq(INT0_IRQ, &cascade_irqaction);
setup_irq(INT1_IRQ, &cascade_irqaction);
setup_irq(INT2_IRQ, &cascade_irqaction);
setup_irq(INT3_IRQ, &cascade_irqaction);
if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
#if defined(CONFIG_LOONGSON1_LS1C)
setup_irq(INT4_IRQ, &cascade_irqaction);
if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
#endif
}
......
......@@ -176,13 +176,6 @@ static struct clock_event_device ls1x_clockevent = {
.tick_resume = ls1x_clockevent_tick_resume,
};
static struct irqaction ls1x_pwmtimer_irqaction = {
.name = "ls1x-pwmtimer",
.handler = ls1x_clockevent_isr,
.dev_id = &ls1x_clockevent,
.flags = IRQF_PERCPU | IRQF_TIMER,
};
static void __init ls1x_time_init(void)
{
struct clock_event_device *cd = &ls1x_clockevent;
......@@ -206,7 +199,10 @@ static void __init ls1x_time_init(void)
if (ret)
panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
&ls1x_clockevent))
pr_err("Failed to register ls1x-pwmtimer interrupt\n");
}
#endif /* CONFIG_CEVT_CSRC_LS1X */
......
......@@ -187,12 +187,6 @@ static irqreturn_t hpet_irq_handler(int irq, void *data)
return IRQ_NONE;
}
static struct irqaction hpet_irq = {
.handler = hpet_irq_handler,
.flags = IRQF_NOBALANCING | IRQF_TIMER,
.name = "hpet",
};
/*
* hpet address assignation and irq setting should be done in bios.
* but pmon don't do this, we just setup here directly.
......@@ -224,6 +218,7 @@ static void hpet_setup(void)
void __init setup_hpet_timer(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
......@@ -247,7 +242,8 @@ void __init setup_hpet_timer(void)
cd->min_delta_ticks = HPET_MIN_PROG_DELTA;
clockevents_register_device(cd);
setup_irq(HPET_T0_IRQ, &hpet_irq);
if (request_irq(HPET_T0_IRQ, hpet_irq_handler, flags, "hpet", NULL))
pr_err("Failed to request irq %d (hpet)\n", HPET_T0_IRQ);
pr_info("hpet clock event device register\n");
}
......
......@@ -144,12 +144,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction corehi_irqaction = {
.handler = corehi_handler,
.name = "CoreHi",
.flags = IRQF_NO_THREAD,
};
static msc_irqmap_t msc_irqmap[] __initdata = {
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
......@@ -223,5 +217,7 @@ void __init arch_init_irq(void)
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
}
setup_irq(corehi_irq, &corehi_irqaction);
if (request_irq(corehi_irq, corehi_handler, IRQF_NO_THREAD, "CoreHi",
NULL))
pr_err("Failed to request irq %d (CoreHi)\n", corehi_irq);
}
......@@ -110,12 +110,6 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
return IRQ_HANDLED;
}
struct irqaction fmn_irqaction = {
.handler = fmn_message_handler,
.flags = IRQF_PERCPU,
.name = "fmn",
};
void xlr_percpu_fmn_init(void)
{
struct xlr_fmn_info *cpu_fmn_info;
......@@ -195,8 +189,9 @@ void nlm_setup_fmn_irq(void)
{
uint32_t flags;
/* setup irq only once */
setup_irq(IRQ_FMN, &fmn_irqaction);
/* request irq only once */
if (request_irq(IRQ_FMN, fmn_message_handler, IRQF_PERCPU, "fmn", NULL))
pr_err("Failed to request irq %d (fmn)\n", IRQ_FMN);
flags = nlm_cop2_enable_irqsave();
nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
......
......@@ -107,18 +107,6 @@ asmlinkage void plat_irq_dispatch(void)
do_IRQ(MSP_INT_SW1);
}
static struct irqaction cic_cascade_msp = {
.handler = no_action,
.name = "MSP CIC cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction per_cascade_msp = {
.handler = no_action,
.name = "MSP PER cascade",
.flags = IRQF_NO_THREAD,
};
void __init arch_init_irq(void)
{
/* assume we'll be using vectored interrupt mode except in UP mode*/
......@@ -142,8 +130,12 @@ void __init arch_init_irq(void)
#endif /* CONFIG_MIPS_MT_SMP */
#endif /* CONFIG_MIPS_MT */
/* setup the cascaded interrupts */
setup_irq(MSP_INT_CIC, &cic_cascade_msp);
setup_irq(MSP_INT_PER, &per_cascade_msp);
if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD,
"MSP CIC cascade", NULL))
pr_err("Failed to register MSP CIC cascade interrupt\n");
if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
"MSP PER cascade", NULL))
pr_err("Failed to register MSP PER cascade interrupt\n");
#else
/*
......@@ -153,7 +145,11 @@ void __init arch_init_irq(void)
msp_slp_irq_init();
/* setup the cascaded SLP/PER interrupts */
setup_irq(MSP_INT_SLP, &cic_cascade_msp);
setup_irq(MSP_INT_PER, &per_cascade_msp);
if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD,
"MSP CIC cascade", NULL))
pr_err("Failed to register MSP CIC cascade interrupt\n");
if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
"MSP PER cascade", NULL))
pr_err("Failed to register MSP PER cascade interrupt\n");
#endif
}
......@@ -38,21 +38,10 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq_resched = {
.handler = ipi_resched_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI_resched"
};
static struct irqaction irq_call = {
.handler = ipi_call_interrupt,
.flags = IRQF_PERCPU,
.name = "IPI_call"
};
void __init arch_init_ipiirq(int irq, struct irqaction *action)
void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler)
{
setup_irq(irq, action);
if (request_irq(irq, handler, IRQF_PERCPU, name, NULL))
pr_err("Failed to request irq %d (%s)\n", irq, name);
irq_set_handler(irq, handle_percpu_irq);
}
......@@ -60,7 +49,8 @@ void __init msp_vsmp_int_init(void)
{
set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched);
arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call);
arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched",
ipi_resched_interrupt);
arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt);
}
#endif /* CONFIG_MIPS_MT_SMP */
......@@ -27,7 +27,6 @@
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
static struct irqaction timer_vpe1;
static int tim_installed;
void __init plat_time_init(void)
......@@ -77,10 +76,13 @@ void __init plat_time_init(void)
unsigned int get_c0_compare_int(void)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1));
setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1);
if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
"timer", NULL))
pr_err("Failed to register timer interrupt\n");
tim_installed++;
}
......
......@@ -82,12 +82,6 @@ static struct systick_device systick = {
},
};
static struct irqaction systick_irqaction = {
.handler = systick_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.dev_id = &systick.dev,
};
static int systick_shutdown(struct clock_event_device *evt)
{
struct systick_device *sdev;
......@@ -95,7 +89,7 @@ static int systick_shutdown(struct clock_event_device *evt)
sdev = container_of(evt, struct systick_device, dev);
if (sdev->irq_requested)
free_irq(systick.dev.irq, &systick_irqaction);
free_irq(systick.dev.irq, &systick.dev);
sdev->irq_requested = 0;
iowrite32(0, systick.membase + SYSTICK_CONFIG);
......@@ -104,12 +98,17 @@ static int systick_shutdown(struct clock_event_device *evt)
static int systick_set_oneshot(struct clock_event_device *evt)
{
const char *name = systick.dev.name;
struct systick_device *sdev;
int irq = systick.dev.irq;
sdev = container_of(evt, struct systick_device, dev);
if (!sdev->irq_requested)
setup_irq(systick.dev.irq, &systick_irqaction);
if (!sdev->irq_requested) {
if (request_irq(irq, systick_interrupt,
IRQF_PERCPU | IRQF_TIMER, name, &systick.dev))
pr_err("Failed to request irq %d (%s)\n", irq, name);
}
sdev->irq_requested = 1;
iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
systick.membase + SYSTICK_CONFIG);
......@@ -125,7 +124,6 @@ static int __init ralink_systick_init(struct device_node *np)
if (!systick.membase)
return -ENXIO;
systick_irqaction.name = np->name;
systick.dev.name = np->name;
clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
......
......@@ -92,11 +92,6 @@ static irqreturn_t ip22_eisa_intr(int irq, void *dev_id)
return IRQ_NONE;
}
static struct irqaction eisa_action = {
.handler = ip22_eisa_intr,
.name = "EISA",
};
int __init ip22_eisa_init(void)
{
int i, c;
......@@ -136,9 +131,8 @@ int __init ip22_eisa_init(void)
init_i8259_irqs();
/* Cannot use request_irq because of kmalloc not being ready at such
* an early stage. Yes, I've been bitten... */
setup_irq(SGI_EISA_IRQ, &eisa_action);
if (request_irq(SGI_EISA_IRQ, ip22_eisa_intr, 0, "EISA", NULL))
pr_err("Failed to request irq %d (EISA)\n", SGI_EISA_IRQ);
EISA_bus = 1;
return 0;
......
......@@ -159,36 +159,7 @@ static void __irq_entry indy_buserror_irq(void)
irq_exit();
}
static struct irqaction local0_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "local0 cascade",
};
static struct irqaction local1_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "local1 cascade",
};
static struct irqaction buserr = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "Bus Error",
};
static struct irqaction map0_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
static struct irqaction map1_cascade = {
.handler = no_action,
.flags = IRQF_NO_THREAD,
.name = "mapable1 cascade",
};
#define SGI_INTERRUPTS SGINT_END
#else
#define SGI_INTERRUPTS SGINT_LOCAL3
......@@ -322,14 +293,24 @@ void __init arch_init_irq(void)
}
/* vector handler. this register the IRQ as non-sharable */
setup_irq(SGI_LOCAL_0_IRQ, &local0_cascade);
setup_irq(SGI_LOCAL_1_IRQ, &local1_cascade);
setup_irq(SGI_BUSERR_IRQ, &buserr);
if (request_irq(SGI_LOCAL_0_IRQ, no_action, IRQF_NO_THREAD,
"local0 cascade", NULL))
pr_err("Failed to register local0 cascade interrupt\n");
if (request_irq(SGI_LOCAL_1_IRQ, no_action, IRQF_NO_THREAD,
"local1 cascade", NULL))
pr_err("Failed to register local1 cascade interrupt\n");
if (request_irq(SGI_BUSERR_IRQ, no_action, IRQF_NO_THREAD,
"Bus Error", NULL))
pr_err("Failed to register Bus Error interrupt\n");
/* cascade in cascade. i love Indy ;-) */
setup_irq(SGI_MAP_0_IRQ, &map0_cascade);
if (request_irq(SGI_MAP_0_IRQ, no_action, IRQF_NO_THREAD,
"mapable0 cascade", NULL))
pr_err("Failed to register mapable0 cascade interrupt\n");
#ifdef USE_LIO3_IRQ
setup_irq(SGI_MAP_1_IRQ, &map1_cascade);
if (request_irq(SGI_MAP_1_IRQ, no_action, IRQF_NO_THREAD,
"mapable1 cascade", NULL))
pr_err("Failed to register mapable1 cascade interrupt\n");
#endif
#ifdef CONFIG_EISA
......
......@@ -111,16 +111,6 @@ static inline void flush_mace_bus(void)
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
static struct irqaction memerr_irq = {
.handler = crime_memerr_intr,
.name = "CRIME memory error",
};
static struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.name = "CRIME CPU error",
};
/*
* This is for pure CRIME interrupts - ie not MACE. The advantage?
* We get to split the register in half and do faster lookups.
......@@ -497,8 +487,12 @@ void __init arch_init_irq(void)
break;
}
}
setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
if (request_irq(CRIME_MEMERR_IRQ, crime_memerr_intr, 0,
"CRIME memory error", NULL))
pr_err("Failed to register CRIME memory error interrupt\n");
if (request_irq(CRIME_CPUERR_IRQ, crime_cpuerr_intr, 0,
"CRIME CPU error", NULL))
pr_err("Failed to register CRIME CPU error interrupt\n");
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
change_c0_status(ST0_IM, ALLINTS);
......
......@@ -222,7 +222,9 @@ void __init sni_a20r_irq_init(void)
irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
IRQF_SHARED, "ISA", NULL))
pr_err("Failed to register ISA interrupt\n");
}
void sni_a20r_init(void)
......
......@@ -27,7 +27,7 @@ asmlinkage void plat_irq_dispatch(void)
}
/* ISA irq handler */
static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
irqreturn_t sni_isa_irq_handler(int dummy, void *p)
{
int irq;
......@@ -39,12 +39,6 @@ static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
return IRQ_HANDLED;
}
struct irqaction sni_isa_irq = {
.handler = sni_isa_irq_handler,
.name = "ISA",
.flags = IRQF_SHARED
};
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8295
......
......@@ -244,7 +244,9 @@ void __init sni_pcit_irq_init(void)
*(volatile u32 *)SNI_PCIT_INT_REG = 0;
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
setup_irq(SNI_PCIT_INT_START + 6, &sni_isa_irq);
if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
IRQF_SHARED, "ISA", NULL))
pr_err("Failed to register ISA interrupt\n");
}
void __init sni_pcit_cplus_irq_init(void)
......@@ -257,7 +259,9 @@ void __init sni_pcit_cplus_irq_init(void)
*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq(MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
IRQF_SHARED, "ISA", NULL))
pr_err("Failed to register ISA interrupt\n");
}
void __init sni_pcit_init(void)
......
......@@ -356,11 +356,6 @@ void sni_rm200_init_8259A(void)
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
static struct irqaction sni_rm200_irq2 = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static struct resource sni_rm200_pic1_resource = {
.name = "onboard ISA pic1",
......@@ -389,12 +384,6 @@ static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p)
return IRQ_HANDLED;
}
struct irqaction sni_rm200_i8259A_irq = {
.handler = sni_rm200_i8259A_irq_handler,
.name = "onboard ISA",
.flags = IRQF_SHARED
};
void __init sni_rm200_i8259_irqs(void)
{
int i;
......@@ -417,7 +406,9 @@ void __init sni_rm200_i8259_irqs(void)
irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip,
handle_level_irq);
setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2);
if (request_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, no_action,
IRQF_NO_THREAD, "cascade", NULL))
pr_err("Failed to register cascade interrupt\n");
}
......@@ -481,8 +472,12 @@ void __init sni_rm200_irq_init(void)
irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq);
if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
IRQF_SHARED, "onboard ISA", NULL))
pr_err("Failed to register onboard ISA interrupt\n");
if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
IRQF_SHARED, "ISA", NULL))
pr_err("Failed to register ISA interrupt\n");
}
void __init sni_rm200_init(void)
......
......@@ -55,12 +55,6 @@ static irqreturn_t a20r_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction a20r_irqaction = {
.handler = a20r_interrupt,
.flags = IRQF_PERCPU | IRQF_TIMER,
.name = "a20r-timer",
};
/*
* a20r platform uses 2 counters to divide the input frequency.
* Counter 2 output is connected to Counter 0 & 1 input.
......@@ -68,13 +62,13 @@ static struct irqaction a20r_irqaction = {
static void __init sni_a20r_timer_setup(void)
{
struct clock_event_device *cd = &a20r_clockevent_device;
struct irqaction *action = &a20r_irqaction;
unsigned int cpu = smp_processor_id();
cd->cpumask = cpumask_of(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
if (request_irq(SNI_A20R_IRQ_TIMER, a20r_interrupt,
IRQF_PERCPU | IRQF_TIMER, "a20r-timer", cd))
pr_err("Failed to register a20r-timer interrupt\n");
}
#define SNI_8254_TICK_RATE 1193182UL
......
......@@ -17,12 +17,6 @@ typedef struct irq_cascade {
static irq_cascade_t irq_cascade[NR_IRQS] __cacheline_aligned;
static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
{
int retval = 0;
......@@ -36,7 +30,8 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int))
irq_cascade[irq].get_irq = get_irq;
if (get_irq != NULL) {
retval = setup_irq(irq, &cascade_irqaction);
retval = request_irq(irq, no_action, IRQF_NO_THREAD,
"cascade", NULL);
if (retval < 0)
irq_cascade[irq].get_irq = NULL;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment