Commit ac9b8b7f authored by Aradhya Bhatia's avatar Aradhya Bhatia Committed by Neil Armstrong

drm/panel: simple: Add Lincoln Tech Sol LCD185-101CT panel

Add support for Lincoln Technology Solutions LCD185-101CT, 10.1",
1920x1200, 8-bit TFT LCD with LVDS interface, LED backlight and PCAP
touch support (Goodix GT928).

[0]: Panel Datasheet
https://lincolntechsolutions.com/wp-content/uploads/2023/04/LCD185-101CTL1ARNTT_DS_R1.3.pdfSigned-off-by: default avatarAradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240515095133.745492-5-a-bhatia1@ti.comSigned-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515095133.745492-5-a-bhatia1@ti.com
parent 43f092d2
......@@ -2870,6 +2870,35 @@ static const struct panel_desc lg_lb070wv8 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode lincolntech_lcd185_101ct_mode = {
.clock = 155127,
.hdisplay = 1920,
.hsync_start = 1920 + 128,
.hsync_end = 1920 + 128 + 20,
.htotal = 1920 + 128 + 20 + 12,
.vdisplay = 1200,
.vsync_start = 1200 + 19,
.vsync_end = 1200 + 19 + 4,
.vtotal = 1200 + 19 + 4 + 20,
};
static const struct panel_desc lincolntech_lcd185_101ct = {
.modes = &lincolntech_lcd185_101ct_mode,
.bpc = 8,
.num_modes = 1,
.size = {
.width = 217,
.height = 136,
},
.delay = {
.prepare = 50,
.disable = 50,
},
.bus_flags = DRM_BUS_FLAG_DE_HIGH,
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing logictechno_lt161010_2nh_timing = {
.pixelclock = { 26400000, 33300000, 46800000 },
.hactive = { 800, 800, 800 },
......@@ -4644,6 +4673,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "lg,lb070wv8",
.data = &lg_lb070wv8,
}, {
.compatible = "lincolntech,lcd185-101ct",
.data = &lincolntech_lcd185_101ct,
}, {
.compatible = "logicpd,type28",
.data = &logicpd_type_28,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment