Merge tag 'pwm/for-6.5-rc1' of...

Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's a little bit of everything in here: we've got various
  improvements and cleanups to drivers, some fixes across the board and
  a bit of new hardware support"

* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
  dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
  pwm: Add Renesas RZ/G2L MTU3a PWM driver
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  dt-bindings: pwm: restrict node name suffixes
  pwm: pca9685: Switch i2c driver back to use .probe()
  pwm: ab8500: Fix error code in probe()
  MAINTAINERS: add pwm to PolarFire SoC entry
  pwm: add microchip soft ip corePWM driver
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  pwm: meson: make full use of common clock framework
  pwm: meson: don't use hdmi/video clock as mux parent
  pwm: meson: switch to using struct clk_parent_data for mux parents
  pwm: meson: remove not needed check in meson_pwm_calc
  pwm: meson: fix handling of period/duty if greater than UINT_MAX
  pwm: meson: modify and simplify calculation in meson_pwm_get_state
  dt-bindings: pwm: Add R-Car V3U device tree bindings
  dt-bindings: pwm: imx: add i.MX8QXP compatible
  pwm: mediatek: Add support for MT7981
  dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
  ...

Documentation/devicetree/bindings/pwm/imx-pwm.yaml

@@ -43,6 +43,7 @@ properties:
               - fsl,imx8mn-pwm
               - fsl,imx8mp-pwm
               - fsl,imx8mq-pwm
+              - fsl,imx8qxp-pwm
           - const: fsl,imx27-pwm
 
   reg:
@@ -61,6 +62,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml

@@ -22,6 +22,7 @@ properties:
           - mediatek,mt7623-pwm
           - mediatek,mt7628-pwm
           - mediatek,mt7629-pwm
+          - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm

Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt

-BCM2835 PWM controller (Raspberry Pi controller)
-
-Required properties:
-- compatible: should be "brcm,bcm2835-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: This clock defines the base clock frequency of the PWM hardware
-  system, the period and the duty_cycle of the PWM signal is a multiple of
-  the base period.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Examples:
-
-pwm@2020c000 {
-	compatible = "brcm,bcm2835-pwm";
-	reg = <0x2020c000 0x28>;
-	clocks = <&clk_pwm>;
-	#pwm-cells = <3>;
-};
-
-clocks {
-	....
-		clk_pwm: pwm {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-frequency = <9200000>;
-		};
-	....
-};

Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PWM controller (Raspberry Pi controller)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@2020c000 {
+      compatible = "brcm,bcm2835-pwm";
+      reg = <0x2020c000 0x28>;
+      clocks = <&clk_pwm>;
+      #pwm-cells = <3>;
+    };

Documentation/devicetree/bindings/pwm/pwm.yaml

@@ -13,7 +13,7 @@ select: false
 
 properties:
   $nodename:
-    pattern: "^pwm(@.*|-[0-9a-f])*$"
+    pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#pwm-cells":
     description:

Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml

@@ -35,6 +35,7 @@ properties:
           - renesas,pwm-r8a77980  # R-Car V3H
           - renesas,pwm-r8a77990  # R-Car E3
           - renesas,pwm-r8a77995  # R-Car D3
+          - renesas,pwm-r8a779a0  # R-Car V3U
           - renesas,pwm-r8a779g0  # R-Car V4H
       - const: renesas,pwm-rcar
 

MAINTAINERS

@@ -18337,6 +18337,7 @@ F:	drivers/clk/microchip/clk-mpfs*.c
 F:	drivers/i2c/busses/i2c-microchip-corei2c.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
+F:	drivers/pwm/pwm-microchip-core.c
 F:	drivers/reset/reset-mpfs.c
 F:	drivers/rtc/rtc-mpfs.c
 F:	drivers/soc/microchip/mpfs-sys-controller.c

drivers/pwm/Kconfig

@@ -405,6 +405,16 @@ config PWM_MEDIATEK
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-mediatek.
 
+config PWM_MICROCHIP_CORE
+	tristate "Microchip corePWM PWM support"
+	depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  PWM driver for Microchip FPGA soft IP core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-microchip-core.
+
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
 	depends on ARCH_MXS || COMPILE_TEST
@@ -493,6 +503,17 @@ config PWM_ROCKCHIP
 	  Generic PWM framework driver for the PWM controller found on
 	  Rockchip SoCs.
 
+config PWM_RZ_MTU3
+	tristate "Renesas RZ/G2L MTU3a PWM Timer support"
+	depends on RZ_MTU3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the MTU3a PWM Timer controller found in Renesas
+	  RZ/G2L like chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-rz-mtu3.
+
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST

drivers/pwm/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
 obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MEDIATEK)	+= pwm-mediatek.o
+obj-$(CONFIG_PWM_MICROCHIP_CORE)	+= pwm-microchip-core.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_NTXEC)		+= pwm-ntxec.o
@@ -45,6 +46,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE)	+= pwm-raspberrypi-poe.o
 obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
+obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
 obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o

drivers/pwm/pwm-ab8500.c

@@ -190,7 +190,7 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	int err;
 
 	if (pdev->id < 1 || pdev->id > 31)
-		return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+		return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
 
 	/*
 	 * Nothing to be done in probe, this is required to get the

drivers/pwm/pwm-clk.c

@@ -89,7 +89,7 @@ static int pwm_clk_probe(struct platform_device *pdev)
 	if (!pcchip)
 		return -ENOMEM;
 
-	pcchip->clk = devm_clk_get(&pdev->dev, NULL);
+	pcchip->clk = devm_clk_get_prepared(&pdev->dev, NULL);
 	if (IS_ERR(pcchip->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(pcchip->clk),
 				     "Failed to get clock\n");
@@ -98,15 +98,9 @@ static int pwm_clk_probe(struct platform_device *pdev)
 	pcchip->chip.ops = &pwm_clk_ops;
 	pcchip->chip.npwm = 1;
 
-	ret = clk_prepare(pcchip->clk);
-	if (ret < 0)
-		return dev_err_probe(&pdev->dev, ret, "Failed to prepare clock\n");
-
 	ret = pwmchip_add(&pcchip->chip);
-	if (ret < 0) {
-		clk_unprepare(pcchip->clk);
+	if (ret < 0)
 		return dev_err_probe(&pdev->dev, ret, "Failed to add pwm chip\n");
-	}
 
 	platform_set_drvdata(pdev, pcchip);
 	return 0;
@@ -120,8 +114,6 @@ static void pwm_clk_remove(struct platform_device *pdev)
 
 	if (pcchip->clk_enabled)
 		clk_disable(pcchip->clk);
-
-	clk_unprepare(pcchip->clk);
 }
 
 static const struct of_device_id pwm_clk_dt_ids[] = {

drivers/pwm/pwm-imx-tpm.c

@@ -397,6 +397,13 @@ static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
 	if (tpm->enable_count > 0)
 		return -EBUSY;
 
+	/*
+	 * Force 'real_period' to be zero to force period update code
+	 * can be executed after system resume back, since suspend causes
+	 * the period related registers to become their reset values.
+	 */
+	tpm->real_period = 0;
+
 	clk_disable_unprepare(tpm->clk);
 
 	return 0;

drivers/pwm/pwm-mediatek.c

@@ -38,6 +38,7 @@ struct pwm_mediatek_of_data {
 	unsigned int num_pwms;
 	bool pwm45_fixup;
 	bool has_ck_26m_sel;
+	const unsigned int *reg_offset;
 };
 
 /**
@@ -59,10 +60,14 @@ struct pwm_mediatek_chip {
 	const struct pwm_mediatek_of_data *soc;
 };
 
-static const unsigned int pwm_mediatek_reg_offset[] = {
+static const unsigned int mtk_pwm_reg_offset_v1[] = {
 	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
 };
 
+static const unsigned int mtk_pwm_reg_offset_v2[] = {
+	0x0080, 0x00c0, 0x0100, 0x0140, 0x0180, 0x01c0, 0x0200, 0x0240
+};
+
 static inline struct pwm_mediatek_chip *
 to_pwm_mediatek_chip(struct pwm_chip *chip)
 {
@@ -111,7 +116,7 @@ static inline void pwm_mediatek_writel(struct pwm_mediatek_chip *chip,
 				       unsigned int num, unsigned int offset,
 				       u32 value)
 {
-	writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset);
+	writel(value, chip->regs + chip->soc->reg_offset[num] + offset);
 }
 
 static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -285,60 +290,77 @@ static const struct pwm_mediatek_of_data mt2712_pwm_data = {
 	.num_pwms = 8,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt6795_pwm_data = {
 	.num_pwms = 7,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7622_pwm_data = {
 	.num_pwms = 6,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7623_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = true,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7628_pwm_data = {
 	.num_pwms = 4,
 	.pwm45_fixup = true,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7629_pwm_data = {
 	.num_pwms = 1,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
-static const struct pwm_mediatek_of_data mt8183_pwm_data = {
-	.num_pwms = 4,
+static const struct pwm_mediatek_of_data mt7981_pwm_data = {
+	.num_pwms = 3,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v2,
 };
 
-static const struct pwm_mediatek_of_data mt8365_pwm_data = {
-	.num_pwms = 3,
+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
+	.num_pwms = 2,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
-static const struct pwm_mediatek_of_data mt7986_pwm_data = {
-	.num_pwms = 2,
+static const struct pwm_mediatek_of_data mt8183_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
+};
+
+static const struct pwm_mediatek_of_data mt8365_pwm_data = {
+	.num_pwms = 3,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt8516_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct of_device_id pwm_mediatek_of_match[] = {
@@ -348,6 +370,7 @@ static const struct of_device_id pwm_mediatek_of_match[] = {
 	{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
 	{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
 	{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+	{ .compatible = "mediatek,mt7981-pwm", .data = &mt7981_pwm_data },
 	{ .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
 	{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
 	{ .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },

drivers/pwm/pwm-mtk-disp.c

@@ -79,14 +79,11 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
 
-	if (!state->enabled) {
-		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-					 0x0);
-
-		if (mdp->enabled) {
-			clk_disable_unprepare(mdp->clk_mm);
-			clk_disable_unprepare(mdp->clk_main);
-		}
+	if (!state->enabled && mdp->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+					 mdp->data->enable_mask, 0x0);
+		clk_disable_unprepare(mdp->clk_mm);
+		clk_disable_unprepare(mdp->clk_main);
 
 		mdp->enabled = false;
 		return 0;

drivers/pwm/pwm-pca9685.c

@@ -665,7 +665,7 @@ static struct i2c_driver pca9685_i2c_driver = {
 		.of_match_table = of_match_ptr(pca9685_dt_ids),
 		.pm = &pca9685_pwm_pm,
 	},
-	.probe_new = pca9685_pwm_probe,
+	.probe = pca9685_pwm_probe,
 	.remove = pca9685_pwm_remove,
 	.id_table = pca9685_id,
 };

drivers/pwm/pwm-sifive.c

@@ -244,12 +244,12 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 	if (IS_ERR(ddata->regs))
 		return PTR_ERR(ddata->regs);
 
-	ddata->clk = devm_clk_get(dev, NULL);
+	ddata->clk = devm_clk_get_prepared(dev, NULL);
 	if (IS_ERR(ddata->clk))
 		return dev_err_probe(dev, PTR_ERR(ddata->clk),
 				     "Unable to find controller clock\n");
 
-	ret = clk_prepare_enable(ddata->clk);
+	ret = clk_enable(ddata->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable clock for pwm: %d\n", ret);
 		return ret;
@@ -308,7 +308,6 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 		clk_disable(ddata->clk);
 		--enabled_clks;
 	}
-	clk_unprepare(ddata->clk);
 
 	return ret;
 }
@@ -327,8 +326,6 @@ static void pwm_sifive_remove(struct platform_device *dev)
 		if (pwm->state.enabled)
 			clk_disable(ddata->clk);
 	}
-
-	clk_unprepare(ddata->clk);
 }
 
 static const struct of_device_id pwm_sifive_of_match[] = {

drivers/pwm/sysfs.c

@@ -424,6 +424,13 @@ static int pwm_class_resume_npwm(struct device *parent, unsigned int npwm)
 		if (!export)
 			continue;
 
+		/* If pwmchip was not enabled before suspend, do nothing. */
+		if (!export->suspend.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = export->suspend.enabled;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0)
@@ -448,7 +455,17 @@ static int pwm_class_suspend(struct device *parent)
 		if (!export)
 			continue;
 
+		/*
+		 * If pwmchip was not enabled before suspend, save
+		 * state for resume time and do nothing else.
+		 */
 		export->suspend = state;
+		if (!state.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = false;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0) {