Commit ad3c7b18 authored by Christoph Hellwig's avatar Christoph Hellwig

arm: use swiotlb for bounce buffering on LPAE configs

The DMA API requires that 32-bit DMA masks are always supported, but on
arm LPAE configs they do not currently work when memory is present
above 4GB.  Wire up the swiotlb code like for all other architectures
to provide the bounce buffering in that case.

Fixes: 21e07dba ("scsi: reduce use of block bounce buffers").
Reported-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Tested-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
parent 66d7780f
......@@ -18,7 +18,9 @@ extern const struct dma_map_ops arm_coherent_dma_ops;
static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
{
return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : NULL;
if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE))
return &arm_dma_ops;
return NULL;
}
#ifdef __arch_page_to_dma
......
......@@ -663,6 +663,11 @@ config ARM_LPAE
depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
!CPU_32v4 && !CPU_32v3
select PHYS_ADDR_T_64BIT
select SWIOTLB
select ARCH_HAS_DMA_COHERENT_TO_PFN
select ARCH_HAS_DMA_MMAP_PGPROT
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_HAS_SYNC_DMA_FOR_CPU
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
......
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dma-noncoherent.h>
#include <linux/dma-contiguous.h>
#include <linux/highmem.h>
#include <linux/memblock.h>
......@@ -1125,6 +1126,19 @@ int arm_dma_supported(struct device *dev, u64 mask)
static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
{
/*
* When CONFIG_ARM_LPAE is set, physical address can extend above
* 32-bits, which then can't be addressed by devices that only support
* 32-bit DMA.
* Use the generic dma-direct / swiotlb ops code in that case, as that
* handles bounce buffering for us.
*
* Note: this checks CONFIG_ARM_LPAE instead of CONFIG_SWIOTLB as the
* latter is also selected by the Xen code, but that code for now relies
* on non-NULL dev_dma_ops. To be cleaned up later.
*/
if (IS_ENABLED(CONFIG_ARM_LPAE))
return NULL;
return coherent ? &arm_coherent_dma_ops : &arm_dma_ops;
}
......@@ -2329,6 +2343,9 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
const struct dma_map_ops *dma_ops;
dev->archdata.dma_coherent = coherent;
#ifdef CONFIG_SWIOTLB
dev->dma_coherent = coherent;
#endif
/*
* Don't override the dma_ops if they have already been set. Ideally
......@@ -2363,3 +2380,47 @@ void arch_teardown_dma_ops(struct device *dev)
/* Let arch_setup_dma_ops() start again from scratch upon re-probe */
set_dma_ops(dev, NULL);
}
#ifdef CONFIG_SWIOTLB
void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
size_t size, enum dma_data_direction dir)
{
__dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
size, dir);
}
void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
size_t size, enum dma_data_direction dir)
{
__dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
size, dir);
}
long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
dma_addr_t dma_addr)
{
return dma_to_pfn(dev, dma_addr);
}
pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot,
unsigned long attrs)
{
if (!dev_is_dma_coherent(dev))
return __get_dma_pgprot(attrs, prot);
return prot;
}
void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp, unsigned long attrs)
{
return __dma_alloc(dev, size, dma_handle, gfp,
__get_dma_pgprot(attrs, PAGE_KERNEL), false,
attrs, __builtin_return_address(0));
}
void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle, unsigned long attrs)
{
__arm_dma_free(dev, size, cpu_addr, dma_handle, attrs, false);
}
#endif /* CONFIG_SWIOTLB */
......@@ -21,6 +21,7 @@
#include <linux/dma-contiguous.h>
#include <linux/sizes.h>
#include <linux/stop_machine.h>
#include <linux/swiotlb.h>
#include <asm/cp15.h>
#include <asm/mach-types.h>
......@@ -463,6 +464,10 @@ static void __init free_highpages(void)
*/
void __init mem_init(void)
{
#ifdef CONFIG_ARM_LPAE
swiotlb_init(1);
#endif
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
/* this will put all unused low memory onto the freelists */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment