xen/vcpu: Simplify xen_vcpu related code

Largely mechanical changes to aid unification of xen_vcpu_restore()
logic for PV, PVH and PVHVM.

xen_vcpu_setup(): the only change in logic is that clamp_max_cpus()
is now handled inside the "if (!xen_have_vcpu_info_placement)" block.

xen_vcpu_restore(): code movement from enlighten_pv.c to enlighten.c.

xen_vcpu_info_reset(): pulls together all the code where xen_vcpu
is set to default.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

arch/x86/xen/enlighten.c

@@ -106,6 +106,35 @@ int xen_cpuhp_setup(int (*cpu_up_prepare_cb)(unsigned int),
 	return rc >= 0 ? 0 : rc;
 }
 
+/*
+ * On restore, set the vcpu placement up again.
+ * If it fails, then we're in a bad state, since
+ * we can't back out from using it...
+ */
+void xen_vcpu_restore(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		bool other_cpu = (cpu != smp_processor_id());
+		bool is_up = HYPERVISOR_vcpu_op(VCPUOP_is_up, xen_vcpu_nr(cpu),
+						NULL);
+
+		if (other_cpu && is_up &&
+		    HYPERVISOR_vcpu_op(VCPUOP_down, xen_vcpu_nr(cpu), NULL))
+			BUG();
+
+		xen_setup_runstate_info(cpu);
+
+		if (xen_have_vcpu_info_placement)
+			xen_vcpu_setup(cpu);
+
+		if (other_cpu && is_up &&
+		    HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL))
+			BUG();
+	}
+}
+
 static void clamp_max_cpus(void)
 {
 #ifdef CONFIG_SMP
@@ -114,6 +143,17 @@ static void clamp_max_cpus(void)
 #endif
 }
 
+void xen_vcpu_info_reset(int cpu)
+{
+	if (xen_vcpu_nr(cpu) < MAX_VIRT_CPUS) {
+		per_cpu(xen_vcpu, cpu) =
+			&HYPERVISOR_shared_info->vcpu_info[xen_vcpu_nr(cpu)];
+	} else {
+		/* Set to NULL so that if somebody accesses it we get an OOPS */
+		per_cpu(xen_vcpu, cpu) = NULL;
+	}
+}
+
 void xen_vcpu_setup(int cpu)
 {
 	struct vcpu_register_vcpu_info info;
@@ -137,40 +177,45 @@ void xen_vcpu_setup(int cpu)
 		if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu))
 			return;
 	}
-	if (xen_vcpu_nr(cpu) < MAX_VIRT_CPUS)
-		per_cpu(xen_vcpu, cpu) =
-			&HYPERVISOR_shared_info->vcpu_info[xen_vcpu_nr(cpu)];
+
+	xen_vcpu_info_reset(cpu);
+
+	if (xen_have_vcpu_info_placement) {
+		vcpup = &per_cpu(xen_vcpu_info, cpu);
+		info.mfn = arbitrary_virt_to_mfn(vcpup);
+		info.offset = offset_in_page(vcpup);
+
+		/*
+		 * Check to see if the hypervisor will put the vcpu_info
+		 * structure where we want it, which allows direct access via
+		 * a percpu-variable.
+		 * N.B. This hypercall can _only_ be called once per CPU.
+		 * Subsequent calls will error out with -EINVAL. This is due to
+		 * the fact that hypervisor has no unregister variant and this
+		 * hypercall does not allow to over-write info.mfn and
+		 * info.offset.
+		 */
+		err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info,
+					 xen_vcpu_nr(cpu), &info);
+
+		if (err) {
+			pr_warn_once("register_vcpu_info failed: cpu=%d err=%d\n",
+				     cpu, err);
+			xen_have_vcpu_info_placement = 0;
+		} else {
+			/*
+			 * This cpu is using the registered vcpu info, even if
+			 * later ones fail to.
+			 */
+			per_cpu(xen_vcpu, cpu) = vcpup;
+		}
+	}
 
 	if (!xen_have_vcpu_info_placement) {
 		if (cpu >= MAX_VIRT_CPUS)
 			clamp_max_cpus();
 		return;
 	}
-
-	vcpup = &per_cpu(xen_vcpu_info, cpu);
-	info.mfn = arbitrary_virt_to_mfn(vcpup);
-	info.offset = offset_in_page(vcpup);
-
-	/* Check to see if the hypervisor will put the vcpu_info
-	   structure where we want it, which allows direct access via
-	   a percpu-variable.
-	   N.B. This hypercall can _only_ be called once per CPU. Subsequent
-	   calls will error out with -EINVAL. This is due to the fact that
-	   hypervisor has no unregister variant and this hypercall does not
-	   allow to over-write info.mfn and info.offset.
-	 */
-	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, xen_vcpu_nr(cpu),
-				 &info);
-
-	if (err) {
-		printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err);
-		xen_have_vcpu_info_placement = 0;
-		clamp_max_cpus();
-	} else {
-		/* This cpu is using the registered vcpu info, even if
-		   later ones fail to. */
-		per_cpu(xen_vcpu, cpu) = vcpup;
-	}
 }
 
 void xen_reboot(int reason)

arch/x86/xen/enlighten_hvm.c

@@ -45,11 +45,7 @@ void __ref xen_hvm_init_shared_info(void)
 	 * online but xen_hvm_init_shared_info is run at resume time too and
 	 * in that case multiple vcpus might be online. */
 	for_each_online_cpu(cpu) {
-		/* Leave it to be NULL. */
-		if (xen_vcpu_nr(cpu) >= MAX_VIRT_CPUS)
-			continue;
-		per_cpu(xen_vcpu, cpu) =
-			&HYPERVISOR_shared_info->vcpu_info[xen_vcpu_nr(cpu)];
+		xen_vcpu_info_reset(cpu);
 	}
 }
 

arch/x86/xen/enlighten_pv.c

@@ -107,35 +107,6 @@ struct tls_descs {
  */
 static DEFINE_PER_CPU(struct tls_descs, shadow_tls_desc);
 
-/*
- * On restore, set the vcpu placement up again.
- * If it fails, then we're in a bad state, since
- * we can't back out from using it...
- */
-void xen_vcpu_restore(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		bool other_cpu = (cpu != smp_processor_id());
-		bool is_up = HYPERVISOR_vcpu_op(VCPUOP_is_up, xen_vcpu_nr(cpu),
-						NULL);
-
-		if (other_cpu && is_up &&
-		    HYPERVISOR_vcpu_op(VCPUOP_down, xen_vcpu_nr(cpu), NULL))
-			BUG();
-
-		xen_setup_runstate_info(cpu);
-
-		if (xen_have_vcpu_info_placement)
-			xen_vcpu_setup(cpu);
-
-		if (other_cpu && is_up &&
-		    HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL))
-			BUG();
-	}
-}
-
 static void __init xen_banner(void)
 {
 	unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
@@ -1332,9 +1303,17 @@ asmlinkage __visible void __init xen_start_kernel(void)
 	 */
 	acpi_numa = -1;
 #endif
-	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map and a non-dummy shared_info. */
-	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+	/* Let's presume PV guests always boot on vCPU with id 0. */
+	per_cpu(xen_vcpu_id, 0) = 0;
+
+	/*
+	 * Setup xen_vcpu early because start_kernel needs it for
+	 * local_irq_disable(), irqs_disabled().
+	 *
+	 * Don't do the full vcpu_info placement stuff until we have
+	 * the cpu_possible_mask and a non-dummy shared_info.
+	 */
+	xen_vcpu_info_reset(0);
 
 	WARN_ON(xen_cpuhp_setup(xen_cpu_up_prepare_pv, xen_cpu_dead_pv));
 
@@ -1431,9 +1410,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
 #endif
 	xen_raw_console_write("about to get started...\n");
 
-	/* Let's presume PV guests always boot on vCPU with id 0. */
-	per_cpu(xen_vcpu_id, 0) = 0;
-
+	/* We need this for printk timestamps */
 	xen_setup_runstate_info(0);
 
 	xen_efi_init();

arch/x86/xen/smp_hvm.c

@@ -12,7 +12,8 @@ static void __init xen_hvm_smp_prepare_boot_cpu(void)
 	native_smp_prepare_boot_cpu();
 
 	/*
-	 * Setup vcpu_info for boot CPU.
+	 * Setup vcpu_info for boot CPU. Secondary CPUs get their vcpu_info
+	 * in xen_cpu_up_prepare_hvm().
 	 */
 	xen_vcpu_setup(0);
 

arch/x86/xen/xen-ops.h

@@ -79,6 +79,7 @@ bool xen_vcpu_stolen(int vcpu);
 extern int xen_have_vcpu_info_placement;
 
 void xen_vcpu_setup(int cpu);
+void xen_vcpu_info_reset(int cpu);
 void xen_setup_vcpu_info_placement(void);
 
 #ifdef CONFIG_SMP