Commit ad976187 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] dib8000: improves the auto search mode check logic

The logic that detects if auto search mode should be used is too
complex.

Also, it doesn't cover all cases, as the dib8000_tune logic
requires either auto mode or a fully specified manual mode.
So, move it to a separate function and add some extra debug
data to help identifying when it falled back to auto mode,
because the manual settings are invalid.
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: default avatarPatrick Boettcher <pboettcher@kernellabs.com>
parent 70315b3e
......@@ -2873,6 +2873,91 @@ static int dib8090p_init_sdram(struct dib8000_state *state)
return 0;
}
/**
* is_manual_mode - Check if TMCC should be used for parameters settings
* @c: struct dvb_frontend_properties
*
* By default, TMCC table should be used for parameter settings on most
* usercases. However, sometimes it is desirable to lock the demod to
* use the manual parameters.
*
* On manual mode, the current dib8000_tune state machine is very restrict:
* It requires that both per-layer and per-transponder parameters to be
* properly specified, otherwise the device won't lock.
*
* Check if all those conditions are properly satisfied before allowing
* the device to use the manual frequency lock mode.
*/
static int is_manual_mode(struct dtv_frontend_properties *c)
{
int i, n_segs = 0;
/* Use auto mode on DVB-T compat mode */
if (c->delivery_system != SYS_ISDBT)
return 0;
/*
* Transmission mode is only detected on auto mode, currently
*/
if (c->transmission_mode == TRANSMISSION_MODE_AUTO) {
dprintk("transmission mode auto");
return 0;
}
/*
* Guard interval is only detected on auto mode, currently
*/
if (c->guard_interval == GUARD_INTERVAL_AUTO) {
dprintk("guard interval auto");
return 0;
}
/*
* If no layer is enabled, assume auto mode, as at least one
* layer should be enabled
*/
if (!c->isdbt_layer_enabled) {
dprintk("no layer modulation specified");
return 0;
}
/*
* Check if the per-layer parameters aren't auto and
* disable a layer if segment count is 0 or invalid.
*/
for (i = 0; i < 3; i++) {
if (!(c->isdbt_layer_enabled & 1 << i))
continue;
if ((c->layer[i].segment_count > 13) ||
(c->layer[i].segment_count == 0)) {
c->isdbt_layer_enabled &= ~(1 << i);
continue;
}
n_segs += c->layer[i].segment_count;
if ((c->layer[i].modulation == QAM_AUTO) ||
(c->layer[i].fec == FEC_AUTO)) {
dprintk("layer %c has either modulation or FEC auto",
'A' + i);
return 0;
}
}
/*
* Userspace specified a wrong number of segments.
* fallback to auto mode.
*/
if (n_segs == 0 || n_segs > 13) {
dprintk("number of segments is invalid");
return 0;
}
/* Everything looks ok for manual mode */
return 1;
}
static int dib8000_tune(struct dvb_frontend *fe)
{
struct dib8000_state *state = fe->demodulator_priv;
......@@ -2901,37 +2986,14 @@ static int dib8000_tune(struct dvb_frontend *fe)
if (state->revision == 0x8090)
dib8090p_init_sdram(state);
state->status = FE_STATUS_TUNE_PENDING;
if ((c->delivery_system != SYS_ISDBT) ||
(c->inversion == INVERSION_AUTO) ||
(c->transmission_mode == TRANSMISSION_MODE_AUTO) ||
(c->guard_interval == GUARD_INTERVAL_AUTO) ||
(((c->isdbt_layer_enabled & (1 << 0)) != 0) &&
(c->layer[0].segment_count != 0xff) &&
(c->layer[0].segment_count != 0) &&
((c->layer[0].modulation == QAM_AUTO) ||
(c->layer[0].fec == FEC_AUTO))) ||
(((c->isdbt_layer_enabled & (1 << 1)) != 0) &&
(c->layer[1].segment_count != 0xff) &&
(c->layer[1].segment_count != 0) &&
((c->layer[1].modulation == QAM_AUTO) ||
(c->layer[1].fec == FEC_AUTO))) ||
(((c->isdbt_layer_enabled & (1 << 2)) != 0) &&
(c->layer[2].segment_count != 0xff) &&
(c->layer[2].segment_count != 0) &&
((c->layer[2].modulation == QAM_AUTO) ||
(c->layer[2].fec == FEC_AUTO))) ||
(((c->layer[0].segment_count == 0) ||
((c->isdbt_layer_enabled & (1 << 0)) == 0)) &&
((c->layer[1].segment_count == 0) ||
((c->isdbt_layer_enabled & (2 << 0)) == 0)) &&
((c->layer[2].segment_count == 0) || ((c->isdbt_layer_enabled & (3 << 0)) == 0))))
state->channel_parameters_set = 0; /* auto search */
else
state->channel_parameters_set = 1; /* channel parameters are known */
state->channel_parameters_set = is_manual_mode(c);
dprintk("Tuning channel on %s search mode",
state->channel_parameters_set ? "manual" : "auto");
dib8000_viterbi_state(state, 0); /* force chan dec in restart */
/* Layer monit */
/* Layer monitor */
dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
dib8000_set_frequency_offset(state);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment