Commit ada2c4f5 authored by Bingbu Cao's avatar Bingbu Cao Committed by Mauro Carvalho Chehab

media: ov2740: support device probe in non-zero ACPI D state

Tell ACPI device PM code that the driver supports the device being in
non-zero ACPI D state when the driver's probe function is entered.

Also do identification on the first access of the device, whether in probe
or when starting streaming.
Signed-off-by: default avatarBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 1e583b56
......@@ -345,6 +345,9 @@ struct ov2740 {
/* NVM data inforamtion */
struct nvm_data *nvm;
/* True if the device has been identified */
bool identified;
};
static inline struct ov2740 *to_ov2740(struct v4l2_subdev *subdev)
......@@ -440,6 +443,30 @@ static int ov2740_write_reg_list(struct ov2740 *ov2740,
return 0;
}
static int ov2740_identify_module(struct ov2740 *ov2740)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
int ret;
u32 val;
if (ov2740->identified)
return 0;
ret = ov2740_read_reg(ov2740, OV2740_REG_CHIP_ID, 3, &val);
if (ret)
return ret;
if (val != OV2740_CHIP_ID) {
dev_err(&client->dev, "chip id mismatch: %x!=%x",
OV2740_CHIP_ID, val);
return -ENXIO;
}
ov2740->identified = true;
return 0;
}
static int ov2740_update_digital_gain(struct ov2740 *ov2740, u32 d_gain)
{
int ret = 0;
......@@ -724,6 +751,10 @@ static int ov2740_start_streaming(struct ov2740 *ov2740)
int link_freq_index;
int ret = 0;
ret = ov2740_identify_module(ov2740);
if (ret)
return ret;
ov2740_load_otp_data(nvm);
link_freq_index = ov2740->cur_mode->link_freq_index;
......@@ -956,25 +987,6 @@ static const struct v4l2_subdev_internal_ops ov2740_internal_ops = {
.open = ov2740_open,
};
static int ov2740_identify_module(struct ov2740 *ov2740)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
int ret;
u32 val;
ret = ov2740_read_reg(ov2740, OV2740_REG_CHIP_ID, 3, &val);
if (ret)
return ret;
if (val != OV2740_CHIP_ID) {
dev_err(&client->dev, "chip id mismatch: %x!=%x",
OV2740_CHIP_ID, val);
return -ENXIO;
}
return 0;
}
static int ov2740_check_hwcfg(struct device *dev)
{
struct fwnode_handle *ep;
......@@ -1137,6 +1149,7 @@ static int ov2740_probe(struct i2c_client *client)
{
struct ov2740 *ov2740;
int ret = 0;
bool full_power;
ret = ov2740_check_hwcfg(&client->dev);
if (ret) {
......@@ -1149,6 +1162,15 @@ static int ov2740_probe(struct i2c_client *client)
if (!ov2740)
return -ENOMEM;
full_power = acpi_dev_state_d0(&client->dev);
if (full_power) {
ret = ov2740_identify_module(ov2740);
if (ret) {
dev_err(&client->dev, "failed to find sensor: %d", ret);
return ret;
}
}
v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
ret = ov2740_identify_module(ov2740);
if (ret) {
......@@ -1186,11 +1208,9 @@ static int ov2740_probe(struct i2c_client *client)
if (ret)
dev_warn(&client->dev, "register nvmem failed, ret %d\n", ret);
/*
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
pm_runtime_set_active(&client->dev);
/* Set the device's state to active if it's in D0 state. */
if (full_power)
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
......@@ -1225,6 +1245,7 @@ static struct i2c_driver ov2740_i2c_driver = {
},
.probe_new = ov2740_probe,
.remove = ov2740_remove,
.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
};
module_i2c_driver(ov2740_i2c_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment