dt: Fix binding typos in clock-names and interrupt-names

s/interrupts-names/interrupt-names/g
s/clocks-names/clock-names/g

Some of the binding files and device tree files get this wrong and the
kernel won't be able to pick it up. Fix them up now so that they don't
get widely used.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by : Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

@@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 {
 	interrupt-names = "macirq";
 	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
 	clocks = <&emac_0_clk>;
-	clocks-names = "stmmaceth";
+	clock-names = "stmmaceth";
 };

Documentation/devicetree/bindings/net/stmmac.txt

@@ -33,7 +33,7 @@ Optional properties:
 - max-frame-size: See ethernet.txt file in the same directory
 - clocks: If present, the first clock should be the GMAC main clock,
   further clocks may be specified in derived bindings.
-- clocks-names: One name for each entry in the clocks property, the
+- clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
 
 Examples:

Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt

@@ -83,7 +83,7 @@ Example:
 		reg 		= <0xfe61f080 0x4>;
 		reg-names	= "irqmux";
 		interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts-names = "irqmux";
+		interrupt-names	= "irqmux";
 		ranges 		= <0 0xfe610000 0x5000>;
 
 		PIO0: gpio@fe610000 {
@@ -165,7 +165,7 @@ sdhci0:sdhci@fe810000{
 	interrupt-parent = <&PIO3>;
 	#interrupt-cells = <2>;
 	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
-	interrupts-names = "card-detect";
+	interrupt-names = "card-detect";
 	pinctrl-names = "default";
 	pinctrl-0	= <&pinctrl_mmc>;
 };

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -47,7 +47,7 @@ mcasp0: mcasp0@1d00000 {
 	reg = <0x100000 0x3000>;
 	reg-names "mpu";
 	interrupts = <82>, <83>;
-	interrupts-names = "tx", "rx";
+	interrupt-names = "tx", "rx";
 	op-mode = <0>;		/* MCASP_IIS_MODE */
 	tdm-slots = <2>;
 	serial-dir = <

arch/arm/boot/dts/am33xx.dtsi

@@ -802,7 +802,7 @@ mcasp0: mcasp@48038000 {
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 				<&edma 9>;
@@ -816,7 +816,7 @@ mcasp1: mcasp@4803C000 {
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 				<&edma 11>;

arch/arm/boot/dts/am4372.dtsi

@@ -691,7 +691,7 @@ mcasp0: mcasp@48038000 {
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
 			       <&edma 9>;
@@ -705,7 +705,7 @@ mcasp1: mcasp@4803C000 {
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
-			interrupts-names = "tx", "rx";
+			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
 			       <&edma 11>;

arch/arm/boot/dts/stih415-pinctrl.dtsi

@@ -49,7 +49,7 @@ pin-controller-sbc {
 			reg 		= <0xfe61f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe610000 0x5000>;
 
 			PIO0: gpio@fe610000 {
@@ -187,7 +187,7 @@ pin-controller-front {
 			reg 		= <0xfee0f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x8000>;
 
 			PIO5: gpio@fee00000 {
@@ -282,7 +282,7 @@ pin-controller-rear {
 			reg 		= <0xfe82f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe820000 0x8000>;
 
 			PIO13: gpio@fe820000 {
@@ -423,7 +423,7 @@ pin-controller-left {
 			reg 		= <0xfd6bf080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
@@ -460,7 +460,7 @@ pin-controller-right {
 			reg 		= <0xfd33f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -53,7 +53,7 @@ pin-controller-sbc {
 			reg 		= <0xfe61f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfe610000 0x6000>;
 
 			PIO0: gpio@fe610000 {
@@ -201,7 +201,7 @@ pin-controller-front {
 			reg 		= <0xfee0f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfee00000 0x10000>;
 
 			PIO5: gpio@fee00000 {
@@ -333,7 +333,7 @@ pin-controller-rear {
 			reg 		= <0xfe82f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges 		= <0 0xfe820000 0x6000>;
 
 			PIO13: gpio@fe820000 {
@@ -461,7 +461,7 @@ pin-controller-fvdp-fe {
 			reg 		= <0xfd6bf080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges		= <0 0xfd6b0000 0x3000>;
 
 			PIO100: gpio@fd6b0000 {
@@ -498,7 +498,7 @@ pin-controller-fvdp-lite {
 			reg 		= <0xfd33f080 0x4>;
 			reg-names	= "irqmux";
 			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupts-names = "irqmux";
+			interrupt-names	= "irqmux";
 			ranges			= <0 0xfd330000 0x5000>;
 
 			PIO103: gpio@fd330000 {

drivers/of/irq.c

@@ -364,7 +364,7 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
 
 		memset(r, 0, sizeof(*r));
 		/*
-		 * Get optional "interrupts-names" property to add a name
+		 * Get optional "interrupt-names" property to add a name
 		 * to the resource.
 		 */
 		of_property_read_string_index(dev, "interrupt-names", index,