Commit ae1dd17d authored by Horia GeantA's avatar Horia GeantA Committed by Herbert Xu

crypto: caam - reduce page 0 regs access to minimum

Use job ring register map, in place of controller register map
to access page 0 registers, as access to the controller register
map is not permitted.
Signed-off-by: default avatarHoria GeantA <horia.geanta@nxp.com>
Signed-off-by: default avatarGaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: default avatarMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: default avatarVarun Sethi <v.sethi@nxp.com>
Reviewed-by: default avatarGaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 6699e143
......@@ -3,7 +3,7 @@
* caam - Freescale FSL CAAM support for crypto API
*
* Copyright 2008-2011 Freescale Semiconductor, Inc.
* Copyright 2016-2019 NXP
* Copyright 2016-2019, 2023 NXP
*
* Based on talitos crypto API driver.
*
......@@ -3542,13 +3542,14 @@ int caam_algapi_init(struct device *ctrldev)
* First, detect presence and attributes of DES, AES, and MD blocks.
*/
if (priv->era < 10) {
struct caam_perfmon __iomem *perfmon = &priv->jr[0]->perfmon;
u32 cha_vid, cha_inst, aes_rn;
cha_vid = rd_reg32(&priv->ctrl->perfmon.cha_id_ls);
cha_vid = rd_reg32(&perfmon->cha_id_ls);
aes_vid = cha_vid & CHA_ID_LS_AES_MASK;
md_vid = (cha_vid & CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
cha_inst = rd_reg32(&priv->ctrl->perfmon.cha_num_ls);
cha_inst = rd_reg32(&perfmon->cha_num_ls);
des_inst = (cha_inst & CHA_ID_LS_DES_MASK) >>
CHA_ID_LS_DES_SHIFT;
aes_inst = cha_inst & CHA_ID_LS_AES_MASK;
......@@ -3556,23 +3557,23 @@ int caam_algapi_init(struct device *ctrldev)
ccha_inst = 0;
ptha_inst = 0;
aes_rn = rd_reg32(&priv->ctrl->perfmon.cha_rev_ls) &
CHA_ID_LS_AES_MASK;
aes_rn = rd_reg32(&perfmon->cha_rev_ls) & CHA_ID_LS_AES_MASK;
gcm_support = !(aes_vid == CHA_VER_VID_AES_LP && aes_rn < 8);
} else {
struct version_regs __iomem *vreg = &priv->jr[0]->vreg;
u32 aesa, mdha;
aesa = rd_reg32(&priv->ctrl->vreg.aesa);
mdha = rd_reg32(&priv->ctrl->vreg.mdha);
aesa = rd_reg32(&vreg->aesa);
mdha = rd_reg32(&vreg->mdha);
aes_vid = (aesa & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
des_inst = rd_reg32(&priv->ctrl->vreg.desa) & CHA_VER_NUM_MASK;
des_inst = rd_reg32(&vreg->desa) & CHA_VER_NUM_MASK;
aes_inst = aesa & CHA_VER_NUM_MASK;
md_inst = mdha & CHA_VER_NUM_MASK;
ccha_inst = rd_reg32(&priv->ctrl->vreg.ccha) & CHA_VER_NUM_MASK;
ptha_inst = rd_reg32(&priv->ctrl->vreg.ptha) & CHA_VER_NUM_MASK;
ccha_inst = rd_reg32(&vreg->ccha) & CHA_VER_NUM_MASK;
ptha_inst = rd_reg32(&vreg->ptha) & CHA_VER_NUM_MASK;
gcm_support = aesa & CHA_VER_MISC_AES_GCM;
}
......
......@@ -3,7 +3,7 @@
* caam - Freescale FSL CAAM support for ahash functions of crypto API
*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2018-2019 NXP
* Copyright 2018-2019, 2023 NXP
*
* Based on caamalg.c crypto API driver.
*
......@@ -1956,12 +1956,14 @@ int caam_algapi_hash_init(struct device *ctrldev)
* presence and attributes of MD block.
*/
if (priv->era < 10) {
md_vid = (rd_reg32(&priv->ctrl->perfmon.cha_id_ls) &
struct caam_perfmon __iomem *perfmon = &priv->jr[0]->perfmon;
md_vid = (rd_reg32(&perfmon->cha_id_ls) &
CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
md_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
md_inst = (rd_reg32(&perfmon->cha_num_ls) &
CHA_ID_LS_MD_MASK) >> CHA_ID_LS_MD_SHIFT;
} else {
u32 mdha = rd_reg32(&priv->ctrl->vreg.mdha);
u32 mdha = rd_reg32(&priv->jr[0]->vreg.mdha);
md_vid = (mdha & CHA_VER_VID_MASK) >> CHA_VER_VID_SHIFT;
md_inst = mdha & CHA_VER_NUM_MASK;
......
......@@ -3,7 +3,7 @@
* caam - Freescale FSL CAAM support for Public Key Cryptography
*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2018-2019 NXP
* Copyright 2018-2019, 2023 NXP
*
* There is no Shared Descriptor for PKC so that the Job Descriptor must carry
* all the desired key parameters, input and output pointers.
......@@ -1168,10 +1168,10 @@ int caam_pkc_init(struct device *ctrldev)
/* Determine public key hardware accelerator presence. */
if (priv->era < 10) {
pk_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
pk_inst = (rd_reg32(&priv->jr[0]->perfmon.cha_num_ls) &
CHA_ID_LS_PK_MASK) >> CHA_ID_LS_PK_SHIFT;
} else {
pkha = rd_reg32(&priv->ctrl->vreg.pkha);
pkha = rd_reg32(&priv->jr[0]->vreg.pkha);
pk_inst = pkha & CHA_VER_NUM_MASK;
/*
......
......@@ -3,7 +3,7 @@
* caam - Freescale FSL CAAM support for hw_random
*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2018-2019 NXP
* Copyright 2018-2019, 2023 NXP
*
* Based on caamalg.c crypto API driver.
*
......@@ -227,10 +227,10 @@ int caam_rng_init(struct device *ctrldev)
/* Check for an instantiated RNG before registration */
if (priv->era < 10)
rng_inst = (rd_reg32(&priv->ctrl->perfmon.cha_num_ls) &
rng_inst = (rd_reg32(&priv->jr[0]->perfmon.cha_num_ls) &
CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
else
rng_inst = rd_reg32(&priv->ctrl->vreg.rng) & CHA_VER_NUM_MASK;
rng_inst = rd_reg32(&priv->jr[0]->vreg.rng) & CHA_VER_NUM_MASK;
if (!rng_inst)
return 0;
......
......@@ -3,7 +3,7 @@
* Controller-level driver, kernel property detection, initialization
*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
* Copyright 2018-2019 NXP
* Copyright 2018-2019, 2023 NXP
*/
#include <linux/device.h>
......@@ -397,7 +397,7 @@ static void kick_trng(struct platform_device *pdev, int ent_delay)
RTMCTL_SAMP_MODE_RAW_ES_SC);
}
static int caam_get_era_from_hw(struct caam_ctrl __iomem *ctrl)
static int caam_get_era_from_hw(struct caam_perfmon __iomem *perfmon)
{
static const struct {
u16 ip_id;
......@@ -423,12 +423,12 @@ static int caam_get_era_from_hw(struct caam_ctrl __iomem *ctrl)
u16 ip_id;
int i;
ccbvid = rd_reg32(&ctrl->perfmon.ccb_id);
ccbvid = rd_reg32(&perfmon->ccb_id);
era = (ccbvid & CCBVID_ERA_MASK) >> CCBVID_ERA_SHIFT;
if (era) /* This is '0' prior to CAAM ERA-6 */
return era;
id_ms = rd_reg32(&ctrl->perfmon.caam_id_ms);
id_ms = rd_reg32(&perfmon->caam_id_ms);
ip_id = (id_ms & SECVID_MS_IPID_MASK) >> SECVID_MS_IPID_SHIFT;
maj_rev = (id_ms & SECVID_MS_MAJ_REV_MASK) >> SECVID_MS_MAJ_REV_SHIFT;
......@@ -446,9 +446,9 @@ static int caam_get_era_from_hw(struct caam_ctrl __iomem *ctrl)
* In case this property is not passed an attempt to retrieve the CAAM
* era via register reads will be made.
*
* @ctrl: controller region
* @perfmon: Performance Monitor Registers
*/
static int caam_get_era(struct caam_ctrl __iomem *ctrl)
static int caam_get_era(struct caam_perfmon __iomem *perfmon)
{
struct device_node *caam_node;
int ret;
......@@ -461,7 +461,7 @@ static int caam_get_era(struct caam_ctrl __iomem *ctrl)
if (!ret)
return prop;
else
return caam_get_era_from_hw(ctrl);
return caam_get_era_from_hw(perfmon);
}
/*
......@@ -628,6 +628,7 @@ static int caam_probe(struct platform_device *pdev)
struct device_node *nprop, *np;
struct caam_ctrl __iomem *ctrl;
struct caam_drv_private *ctrlpriv;
struct caam_perfmon __iomem *perfmon;
struct dentry *dfs_root;
u32 scfgr, comp_params;
u8 rng_vid;
......@@ -667,9 +668,36 @@ static int caam_probe(struct platform_device *pdev)
return ret;
}
caam_little_end = !(bool)(rd_reg32(&ctrl->perfmon.status) &
ring = 0;
for_each_available_child_of_node(nprop, np)
if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
u32 reg;
if (of_property_read_u32_index(np, "reg", 0, &reg)) {
dev_err(dev, "%s read reg property error\n",
np->full_name);
continue;
}
ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
((__force uint8_t *)ctrl + reg);
ctrlpriv->total_jobrs++;
ring++;
}
/*
* Wherever possible, instead of accessing registers from the global page,
* use the alias registers in the first (cf. DT nodes order)
* job ring's page.
*/
perfmon = ring ? (struct caam_perfmon __iomem *)&ctrlpriv->jr[0]->perfmon :
(struct caam_perfmon __iomem *)&ctrl->perfmon;
caam_little_end = !(bool)(rd_reg32(&perfmon->status) &
(CSTA_PLEND | CSTA_ALT_PLEND));
comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ms);
comp_params = rd_reg32(&perfmon->comp_parms_ms);
if (comp_params & CTPR_MS_PS && rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR)
caam_ptr_sz = sizeof(u64);
else
......@@ -780,7 +808,7 @@ static int caam_probe(struct platform_device *pdev)
return ret;
}
ctrlpriv->era = caam_get_era(ctrl);
ctrlpriv->era = caam_get_era(perfmon);
ctrlpriv->domain = iommu_get_domain_for_dev(dev);
dfs_root = debugfs_create_dir(dev_name(dev), NULL);
......@@ -791,7 +819,7 @@ static int caam_probe(struct platform_device *pdev)
return ret;
}
caam_debugfs_init(ctrlpriv, dfs_root);
caam_debugfs_init(ctrlpriv, perfmon, dfs_root);
/* Check to see if (DPAA 1.x) QI present. If so, enable */
if (ctrlpriv->qi_present && !caam_dpaa2) {
......@@ -810,26 +838,13 @@ static int caam_probe(struct platform_device *pdev)
#endif
}
ring = 0;
for_each_available_child_of_node(nprop, np)
if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *)
((__force uint8_t *)ctrl +
(ring + JR_BLOCK_NUMBER) *
BLOCK_OFFSET
);
ctrlpriv->total_jobrs++;
ring++;
}
/* If no QI and no rings specified, quit and go home */
if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) {
dev_err(dev, "no queues configured, terminating\n");
return -ENOMEM;
}
comp_params = rd_reg32(&ctrl->perfmon.comp_parms_ls);
comp_params = rd_reg32(&perfmon->comp_parms_ls);
ctrlpriv->blob_present = !!(comp_params & CTPR_LS_BLOB);
/*
......@@ -838,15 +853,21 @@ static int caam_probe(struct platform_device *pdev)
* check both here.
*/
if (ctrlpriv->era < 10) {
rng_vid = (rd_reg32(&ctrl->perfmon.cha_id_ls) &
rng_vid = (rd_reg32(&perfmon->cha_id_ls) &
CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT;
ctrlpriv->blob_present = ctrlpriv->blob_present &&
(rd_reg32(&ctrl->perfmon.cha_num_ls) & CHA_ID_LS_AES_MASK);
(rd_reg32(&perfmon->cha_num_ls) & CHA_ID_LS_AES_MASK);
} else {
rng_vid = (rd_reg32(&ctrl->vreg.rng) & CHA_VER_VID_MASK) >>
struct version_regs __iomem *vreg;
vreg = ctrlpriv->total_jobrs ?
(struct version_regs __iomem *)&ctrlpriv->jr[0]->vreg :
(struct version_regs __iomem *)&ctrl->vreg;
rng_vid = (rd_reg32(&vreg->rng) & CHA_VER_VID_MASK) >>
CHA_VER_VID_SHIFT;
ctrlpriv->blob_present = ctrlpriv->blob_present &&
(rd_reg32(&ctrl->vreg.aesa) & CHA_VER_MISC_AES_NUM_MASK);
(rd_reg32(&vreg->aesa) & CHA_VER_MISC_AES_NUM_MASK);
}
/*
......@@ -927,8 +948,8 @@ static int caam_probe(struct platform_device *pdev)
/* NOTE: RTIC detection ought to go here, around Si time */
caam_id = (u64)rd_reg32(&ctrl->perfmon.caam_id_ms) << 32 |
(u64)rd_reg32(&ctrl->perfmon.caam_id_ls);
caam_id = (u64)rd_reg32(&perfmon->caam_id_ms) << 32 |
(u64)rd_reg32(&perfmon->caam_id_ls);
/* Report "alive" for developer to see */
dev_info(dev, "device ID = 0x%016llx (Era %d)\n", caam_id,
......
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */
/* Copyright 2019, 2023 NXP */
#include <linux/debugfs.h>
#include "compat.h"
......@@ -42,16 +42,15 @@ void caam_debugfs_qi_init(struct caam_drv_private *ctrlpriv)
}
#endif
void caam_debugfs_init(struct caam_drv_private *ctrlpriv, struct dentry *root)
void caam_debugfs_init(struct caam_drv_private *ctrlpriv,
struct caam_perfmon __force *perfmon,
struct dentry *root)
{
struct caam_perfmon *perfmon;
/*
* FIXME: needs better naming distinction, as some amalgamation of
* "caam" and nprop->full_name. The OF name isn't distinctive,
* but does separate instances
*/
perfmon = (struct caam_perfmon __force *)&ctrlpriv->ctrl->perfmon;
ctrlpriv->ctl = debugfs_create_dir("ctl", root);
......
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/* Copyright 2019 NXP */
/* Copyright 2019, 2023 NXP */
#ifndef CAAM_DEBUGFS_H
#define CAAM_DEBUGFS_H
struct dentry;
struct caam_drv_private;
struct caam_perfmon;
#ifdef CONFIG_DEBUG_FS
void caam_debugfs_init(struct caam_drv_private *ctrlpriv, struct dentry *root);
void caam_debugfs_init(struct caam_drv_private *ctrlpriv,
struct caam_perfmon __force *perfmon, struct dentry *root);
#else
static inline void caam_debugfs_init(struct caam_drv_private *ctrlpriv,
struct caam_perfmon __force *perfmon,
struct dentry *root)
{}
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment