Staging: rt2870: remove dead RALINK_ATE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2870/common/2870_rtmp_init.c

@@ -518,10 +518,6 @@ NDIS_STATUS	RTMPAllocTxRxRingMemory(
 			NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]);
 		}
 
-#ifdef RALINK_ATE
-		NdisAllocateSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
-
 //		NdisAllocateSpinLock(&pAd->MemLock);	// Not used in RT28XX
 
 //		NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit()
@@ -684,9 +680,7 @@ VOID	RTMPFreeTxRxRingMemory(
 	NdisFreeSpinLock(&pAd->MLMEBulkOutLock);
 
 	NdisFreeSpinLock(&pAd->CmdQLock);
-#ifdef RALINK_ATE
-	NdisFreeSpinLock(&pAd->GenericLock);
-#endif // RALINK_ATE //
+
 	// Clear all pending bulk-out request flags.
 	RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff);
 
@@ -1197,17 +1191,6 @@ static void rx_done_tasklet(unsigned long data)
 
 	ASSERT((pRxContext->InUse == pRxContext->IRPPending));
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-    {
-		// If the driver is in ATE mode and Rx frame is set into here.
-		if (pAd->ContinBulkIn == TRUE)
-		{
-			RTUSBBulkReceive(pAd);
-		}
-	}
-	else
-#endif // RALINK_ATE //
 	RTUSBBulkReceive(pAd);
 
 	return;

drivers/staging/rt2870/common/action.c

@@ -890,11 +890,6 @@ VOID ORIBATimerTimeout(
 //	USHORT			Sequence;
 	UCHAR			TID;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	total = pAd->MacTab.Size * NUM_OF_TID;
 
 	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)

drivers/staging/rt2870/common/ba_action.c

@@ -1088,12 +1088,6 @@ VOID BAOriSessionSetupTimeout(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
 	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))

drivers/staging/rt2870/common/cmm_sync.c

@@ -397,12 +397,6 @@ VOID ScanNextChannel(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)

drivers/staging/rt2870/common/mlme.c

@@ -585,14 +585,6 @@ VOID MlmeHandler(
 			break;
 		}
 
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
 		//From message type, determine which state machine I should drive
 		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
 		{
@@ -823,18 +815,6 @@ VOID MlmePeriodicExec(
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -888,30 +868,6 @@ VOID MlmePeriodicExec(
 	{
                 pAd->Mlme.OneSecPeriodicRound ++;
 
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
 		if (rx_Total)
 		{
 
@@ -1032,17 +988,6 @@ VOID STAMlmePeriodicExec(
 	ULONG	TxTotalCnt;
 	int 	i;
 
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef WPA_SUPPLICANT_SUPPORT
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
 #endif // WPA_SUPPLICANT_SUPPORT //
@@ -2003,13 +1948,6 @@ VOID MlmeDynamicTxRateSwitching(
 	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
 	MAC_TABLE_ENTRY			*pEntry;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
 	//
 	// walk through MAC table, see if need to change AP's TX rate toward each entry
 	//
@@ -4851,12 +4789,6 @@ BOOLEAN MlmeEnqueueForRecv(
 	INT		 MsgType;
 	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
@@ -5531,11 +5463,6 @@ VOID 	AsicUpdateProtect(
 	UCHAR			i;
 	UINT32 MacReg = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
 	{
@@ -7972,12 +7899,6 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -8055,12 +7976,6 @@ VOID AsicRxAntEvalTimeout(
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{

drivers/staging/rt2870/common/rtmp_init.c

@@ -2276,12 +2276,6 @@ VOID NICUpdateFifoStaCounters(
 	CHAR				reTry;
 	UCHAR				succMCS;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 		do
 		{
 			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
@@ -3425,36 +3419,6 @@ VOID	UserCfgInit(
 	//RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE);
 	//RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV);
 
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = NULL;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
 	pAd->CommonCfg.bWiFiTest = FALSE;
 
 
@@ -3733,13 +3697,6 @@ VOID RTMPSetLED(
 	UCHAR			HighByte = 0;
 	UCHAR			LowByte;
 
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	LowByte = pAd->LedCntl.field.LedMode&0x7f;
 	switch (Status)
 	{

drivers/staging/rt2870/common/rtusb_bulk.c

@@ -1589,9 +1589,6 @@ VOID	RTUSBKickBulkOut(
 {
 	// BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged.
 	if (!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX)
-#ifdef RALINK_ATE
-		&& !(ATE_ON(pAd))
-#endif // RALINK_ATE //
 		)
 	{
 #if 0	// not used now in RT28xx, but may used latter.
@@ -1700,18 +1697,6 @@ VOID	RTUSBKickBulkOut(
 
 		}
 	}
-#ifdef RALINK_ATE
-	/* If the mode is in ATE mode. */
-	else if((ATE_ON(pAd)) &&
-		!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX))// PETER : watch out !
-	{
-		if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE))
-		{
-			ATE_RTUSBBulkOutDataPacket(pAd, 0);
-		}
-	}
-#endif // RALINK_ATE //
-
 }
 
 /*
@@ -1894,14 +1879,6 @@ VOID	RTUSBCancelPendingBulkOutIRP(
 			RTMPusecDelay(200);
 		}
 
-#ifdef RALINK_ATE
-		pHTTXContext->bCopySavePad = 0;
-		pHTTXContext->CurWritePosition = 0;
-		pHTTXContext->CurWriteRealPos = 0;
-		pHTTXContext->bCurWriting = FALSE;
-		pHTTXContext->NextBulkOutPosition = 0;
-		pHTTXContext->ENextBulkOutPosition = 0;
-#endif // RALINK_ATE //
 		pAd->BulkOutPending[Idx] = FALSE;
 	}
 

drivers/staging/rt2870/common/rtusb_io.c

@@ -1327,13 +1327,6 @@ VOID CMDHandler(
 #ifdef CONFIG_STA_SUPPORT
 						UINT32 data;
 #endif // CONFIG_STA_SUPPORT //
-#ifdef RALINK_ATE
-       					if(ATE_ON(pAd))
-						{
-							DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-							break;
-						}
-#endif // RALINK_ATE //
 
 #ifdef CONFIG_STA_SUPPORT
 
@@ -1394,9 +1387,7 @@ VOID CMDHandler(
 						PHT_TX_CONTEXT	pHTTXContext;
 //						RTMP_TX_RING *pTxRing;
 						unsigned long IrqFlags;
-#ifdef RALINK_ATE
-						PTX_CONTEXT		pNullContext = &(pAd->NullContext);
-#endif // RALINK_ATE //
+
 						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid));
 						// All transfers must be aborted or cancelled before attempting to reset the pipe.
 						//RTUSBCancelPendingBulkOutIRP(pAd);
@@ -1459,32 +1450,6 @@ VOID CMDHandler(
 								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
 								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
 /*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-								if(ATE_ON(pAd))
-							    {
-									pNullContext->IRPPending = TRUE;
-									//
-									// If driver is still in ATE TXFRAME mode,
-									// keep on transmitting ATE frames.
-									//
-									DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->ate.Mode == %d\npAd->ContinBulkOut == %d\npAd->BulkOutRemained == %d\n", pAd->ate.Mode, pAd->ContinBulkOut, atomic_read(&pAd->BulkOutRemained)));
-									if((pAd->ate.Mode == ATE_TXFRAME) && ((pAd->ContinBulkOut == TRUE) || (atomic_read(&pAd->BulkOutRemained) > 0)))
-								    {
-										DBGPRINT_RAW(RT_DEBUG_TRACE, ("After CMDTHREAD_RESET_BULK_OUT, continue to bulk out frames !\n"));
-
-										// Init Tx context descriptor
-										RTUSBInitTxDesc(pAd, pNullContext, 0/* pAd->bulkResetPipeid */, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
-
-										if((ret = RTUSB_SUBMIT_URB(pNullContext->pUrb))!=0)
-										{
-											DBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
-										}
-
-										pAd->BulkOutReq++;
-									}
-								}
-								else
-#endif // RALINK_ATE //
 /*-----------------------------------------------------------------------------------------------*/
 								{
 								RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, pHTTXContext->BulkOutSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete);
@@ -1597,19 +1562,6 @@ VOID CMDHandler(
 					{
 						UINT32		MACValue;
 /*-----------------------------------------------------------------------------------------------*/
-#ifdef RALINK_ATE
-						if (ATE_ON(pAd))
-						{
-							if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
-							{
-								DBGPRINT_RAW(RT_DEBUG_ERROR, ("ATE : BulkIn IRP Pending!!!\n"));
-								ATE_RTUSBCancelPendingBulkInIRP(pAd);
-								RTMPusecDelay(100000);
-								pAd->PendingRx = 0;
-							}
-						}
-						else
-#endif // RALINK_ATE //
 /*-----------------------------------------------------------------------------------------------*/
 						{
 						//while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))

drivers/staging/rt2870/oid.h

@@ -81,9 +81,6 @@
 
 #define OID_GEN_MACHINE_NAME               0x0001021A
 
-#ifdef RALINK_ATE
-#define RT_QUERY_ATE_TXDONE_COUNT			0x0401
-#endif // RALINK_ATE //
 #define RT_QUERY_SIGNAL_CONTEXT				0x0402
 #define RT_SET_IAPP_PID                 	0x0404
 #define RT_SET_APD_PID						0x0405
@@ -662,12 +659,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
 #endif
 
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-#define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)

drivers/staging/rt2870/rt2870.h

@@ -69,10 +69,6 @@
 #define	fRTUSB_BULK_OUT_DATA_FRAG_3				0x00000100
 #define	fRTUSB_BULK_OUT_DATA_FRAG_4				0x00000200
 
-#ifdef RALINK_ATE
-#define	fRTUSB_BULK_OUT_DATA_ATE				0x00100000
-#endif // RALINK_ATE //
-
 #define RT2870_USB_DEVICES	\
 {	\
 	{USB_DEVICE(0x148F,0x2770)}, /* Ralink */		\

drivers/staging/rt2870/rt_ate.h

-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __ATE_H__
-#define __ATE_H__
-
-#define ate_print printk
-#define ATEDBGPRINT DBGPRINT
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-#define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
-
-/* RT2880_iNIC will define "RT2860". */
-
-/* RT2880_iNIC will define RT2860. */
-
-#ifdef RT2870
-#define EEPROM_SIZE								0x400
-#ifdef CONFIG_STA_SUPPORT
-#define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
-#endif // CONFIG_STA_SUPPORT //
-#endif // RT2870 //
-
-#ifdef RT2870
-#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)    RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)
-#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)
-
-#define BULK_OUT_LOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_LOCK((pLock), IrqFlags);
-
-#define BULK_OUT_UNLOCK(pLock, IrqFlags)	\
-		if(1 /*!(in_interrupt() & 0xffff0000)*/)	\
-			RTMP_IRQ_UNLOCK((pLock), IrqFlags);
-
-// Prototypes of completion funuc.
-VOID ATE_RTUSBBulkOutDataPacketComplete(
-	IN purbb_t purb,
-	OUT struct pt_regs *pt_regs);
-
-VOID ATE_RTUSBBulkOutDataPacket(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			BulkOutPipeId);
-
-VOID ATE_RTUSBCancelPendingBulkInIRP(
-	IN	PRTMP_ADAPTER	pAd);
-#endif // RT2870 //
-
-VOID rt_ee_read_all(
-	IN  PRTMP_ADAPTER   pAd,
-	OUT USHORT *Data);
-
-
-VOID rt_ee_write_all(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  USHORT *Data);
-
-INT Set_ATE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_DA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_SA_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_BSSID_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_CHANNEL_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER0_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_POWER1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_RX_Antenna_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_FREQOFFSET_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_BW_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_LENGTH_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_COUNT_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MCS_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_MODE_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_TX_GI_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-
-INT	Set_ATE_RX_FER_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_RF_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF1_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF2_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF3_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Write_RF4_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Load_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_ATE_Read_E2P_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Show_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT	Set_ATE_Help_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
-	IN PRTMP_ADAPTER		pAd,
-	IN PRXWI_STRUC			pRxWI,
-	IN PRT28XX_RXD_STRUC    p28xxRxD,
-	IN PHEADER_802_11		pHeader);
-
-VOID RtmpDoAte(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID BubbleSort(
-	IN  INT32 n,
-	IN  INT32 a[]);
-
-VOID CalNoiseLevel(
-	IN  PRTMP_ADAPTER   pAdapter,
-	IN  UCHAR           channel,
-	OUT INT32           buffer[3][10]);
-
-BOOLEAN SyncTxRxConfig(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	USHORT			offset,
-	IN	UCHAR			value);
-
-#if 0
-INT Set_TxStart_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif  // 0 //
-
-INT Set_TxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RxStop_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-#if 0
-INT Set_EERead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_EEWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPRead_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_BBPWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-
-INT Set_RFWrite_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PUCHAR			arg);
-#endif // end of #if 0 //
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-VOID ATEAsicSwitchChannel(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEAsicAdjustTxPower(
-	IN PRTMP_ADAPTER pAd);
-
-VOID ATEDisableAsicProtect(
-	IN		PRTMP_ADAPTER	pAd);
-
-CHAR ATEConvertToRssi(
-	IN PRTMP_ADAPTER  pAd,
-	IN CHAR				Rssi,
-	IN UCHAR    RssiNumber);
-
-VOID ATESampleRssi(
-	IN PRTMP_ADAPTER	pAd,
-	IN PRXWI_STRUC		pRxWI);
-
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
-    IN  PRTMP_ADAPTER   pAd);
-
-VOID RTMPStationStart(
-    IN  PRTMP_ADAPTER   pAd);
-#endif // CONFIG_STA_SUPPORT //
-#endif // __ATE_H__ //

drivers/staging/rt2870/rt_config.h

@@ -75,12 +75,6 @@
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifdef RALINK_ATE
-#include "rt_ate.h"
-#endif // RALINK_ATE //
-
-
-
 #ifdef CONFIG_STA_SUPPORT
 #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 #ifndef WPA_SUPPLICANT_SUPPORT

drivers/staging/rt2870/rt_main_dev.c

@@ -1430,15 +1430,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-	/* RT2870STA does this in RTMPSendPackets() */
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES);
-		return 0;
-	}
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{

drivers/staging/rt2870/rtmp.h

@@ -284,92 +284,6 @@ extern UCHAR  PRE_N_HT_OUI[];
 
 #define	MAXSEQ		(0xFFF)
 
-#ifdef RALINK_ATE
-typedef	struct _ATE_INFO {
-	UCHAR	Mode;
-	CHAR	TxPower0;
-	CHAR	TxPower1;
-	CHAR    TxAntennaSel;
-	CHAR    RxAntennaSel;
-	TXWI_STRUC  TxWI; 	  // TXWI
-	USHORT	QID;
-	UCHAR	Addr1[MAC_ADDR_LEN];
-	UCHAR	Addr2[MAC_ADDR_LEN];
-	UCHAR	Addr3[MAC_ADDR_LEN];
-	UCHAR	Channel;
-	UINT32	TxLength;
-	UINT32	TxCount;
-	UINT32	TxDoneCount; // Tx DMA Done
-	UINT32	RFFreqOffset;
-	BOOLEAN	bRxFer;
-	BOOLEAN	bQATxStart; // Have compiled QA in and use it to ATE tx.
-	BOOLEAN	bQARxStart;	// Have compiled QA in and use it to ATE rx.
-	UINT32	RxTotalCnt;
-	UINT32	RxCntPerSec;
-
-	CHAR	LastSNR0;             // last received SNR
-	CHAR    LastSNR1;             // last received SNR for 2nd  antenna
-	CHAR    LastRssi0;            // last received RSSI
-	CHAR    LastRssi1;            // last received RSSI for 2nd  antenna
-	CHAR    LastRssi2;            // last received RSSI for 3rd  antenna
-	CHAR    AvgRssi0;             // last 8 frames' average RSSI
-	CHAR    AvgRssi1;             // last 8 frames' average RSSI
-	CHAR    AvgRssi2;             // last 8 frames' average RSSI
-	SHORT   AvgRssi0X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi1X8;           // sum of last 8 frames' RSSI
-	SHORT   AvgRssi2X8;           // sum of last 8 frames' RSSI
-
-	UINT32	NumOfAvgRssiSample;
-
-#ifdef RALINK_28xx_QA
-	// Tx frame
-#ifdef RT2870
-	/* not used in RT2860 */
-	TXINFO_STRUC		TxInfo; // TxInfo
-#endif // RT2870 //
-	USHORT		HLen; // Header Length
-	USHORT		PLen; // Pattern Length
-	UCHAR 		Header[32]; // Header buffer
-	UCHAR		Pattern[32]; // Pattern buffer
-	USHORT		DLen; // Data Length
-	USHORT		seq;
-	UINT32		CID;
-	THREAD_PID 		AtePid;
-	// counters
-	UINT32		U2M;
-	UINT32		OtherData;
-	UINT32		Beacon;
-	UINT32		OtherCount;
-	UINT32		TxAc0;
-	UINT32		TxAc1;
-	UINT32		TxAc2;
-	UINT32		TxAc3;
-	UINT32		TxHCCA;
-	UINT32		TxMgmt;
-	UINT32		RSSI0;
-	UINT32		RSSI1;
-	UINT32		RSSI2;
-	UINT32		SNR0;
-	UINT32		SNR1;
-	// control
-	//UINT32		Repeat; // Tx Cpu count
-	UCHAR		TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-}	ATE_INFO, *PATE_INFO;
-
-#ifdef RALINK_28xx_QA
-struct ate_racfghdr {
- 	UINT32		magic_no;
-	USHORT		command_type;
-	USHORT		command_id;
-	USHORT		length;
-	USHORT		sequence;
-	USHORT		status;
-	UCHAR		data[2046];
-}  __attribute__((packed));
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 struct reordering_mpdu
 {
@@ -2702,12 +2616,6 @@ typedef struct _RTMP_ADAPTER
 	struct completion			mlmeComplete;
 	struct completion			CmdQComplete;
 	wait_queue_head_t			*wait;
-
-	//======Lock for 2870 ATE
-#ifdef RALINK_ATE
-	NDIS_SPIN_LOCK			GenericLock;		// ATE Tx/Rx generic spinlock
-#endif // RALINK_ATE //
-
 #endif // RT2870 //
 
 
@@ -3020,16 +2928,6 @@ typedef struct _RTMP_ADAPTER
 
     struct wificonf			WIFItestbed;
 
-#ifdef RALINK_ATE
-	ATE_INFO				ate;
-#ifdef RT2870
-	BOOLEAN					ContinBulkOut;		//ATE bulk out control
-	BOOLEAN					ContinBulkIn;		//ATE bulk in control
-	atomic_t				BulkOutRemained;
-	atomic_t				BulkInRemained;
-#endif // RT2870 //
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 	struct reordering_mpdu_pool mpdu_blk_pool;
 #endif // DOT11_N_SUPPORT //

drivers/staging/rt2870/rtmp_def.h

@@ -1339,24 +1339,6 @@
 #define INT_MESH                   	0x0500
 
 // Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-#ifdef RALINK_ATE
-#define	ATE_START                   0x00   // Start ATE
-#define	ATE_STOP                    0x80   // Stop ATE
-#define	ATE_TXCONT                  0x05   // Continuous Transmit
-#define	ATE_TXCARR                  0x09   // Transmit Carrier
-#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
-#define	ATE_TXFRAME                 0x01   // Transmit Frames
-#define	ATE_RXFRAME                 0x02   // Receive Frames
-#ifdef RALINK_28xx_QA
-#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
-#define ATE_RXSTOP					0xfd   // Stop receiving Frames
-#define	BBP22_TXFRAME     			0x00   // Transmit Frames
-#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
-#define	BBP22_TXCARR                0xc1   // Transmit Carrier
-#define	BBP24_TXCONT                0x00   // Continuous Transmit
-#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
 
 // WEP Key TYPE
 #define WEP_HEXADECIMAL_TYPE    0

drivers/staging/rt2870/sta/connect.c

@@ -264,13 +264,6 @@ VOID CntlIdleProc(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if(ATE_ON(pAd))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
 			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
@@ -313,13 +306,6 @@ VOID CntlOidScanProc(
 	ULONG                      BssIdx = BSS_NOT_FOUND;
 	BSS_ENTRY                  CurrBss;
 
-#ifdef RALINK_ATE
-/* Disable scanning when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 	// record current BSS if network is connected.
 	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
@@ -539,12 +525,6 @@ VOID CntlOidRTBssidProc(
 	MLME_DISASSOC_REQ_STRUCT    DisassocReq;
 	MLME_JOIN_REQ_STRUCT        JoinReq;
 
-#ifdef RALINK_ATE
-/* No need to perform this routine when ATE is running. */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	// record user desired settings
 	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
 	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
@@ -2017,12 +1997,6 @@ VOID LinkDown(
 	if (MONITOR_ON(pAd))
 		return;
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
     if (pAd->CommonCfg.bWirelessEvent)
 	{
 		RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);

drivers/staging/rt2870/sta/rtmp_data.c

@@ -755,22 +755,6 @@ BOOLEAN STARxDoneInterruptHandle(
 			break;
 		}
 		/* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */
-#ifdef RALINK_ATE
-		if (ATE_ON(pAd))
-		{
-			pAd->ate.RxCntPerSec++;
-			ATESampleRssi(pAd, pRxWI);
-#ifdef RALINK_28xx_QA
-			if (pAd->ate.bQARxStart == TRUE)
-			{
-				/* (*pRxD) has been swapped in GetPacketFromRxRing() */
-				ATE_QA_Statistics(pAd, pRxWI, pRxD,	pHeader);
-			}
-#endif // RALINK_28xx_QA //
-			RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS);
-			continue;
-		}
-#endif // RALINK_ATE //
 
 		// Check for all RxD errors
 		Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD);
@@ -1297,14 +1281,6 @@ VOID	RTMPSendNullFrame(
 	ULONG	Length;
 	PHEADER_802_11	pHeader_802_11;
 
-
-#ifdef RALINK_ATE
-	if(ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
     // WPA 802.1x secured port control
     if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||

drivers/staging/rt2870/sta/sync.c

@@ -973,14 +973,6 @@ VOID PeerBeacon(
 	UCHAR			AddHtInfoLen;
 	UCHAR			NewExtChannelOffset = 0xff;
 
-
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
 	if (!(INFRA_ON(pAd) || ADHOC_ON(pAd)
 		))
 		return;
@@ -1613,14 +1605,6 @@ VOID InvalidStateWhenStart(
 VOID EnqueuePsPoll(
 	IN PRTMP_ADAPTER pAd)
 {
-#ifdef RALINK_ATE
-    if (ATE_ON(pAd))
-    {
-		return;
-    }
-#endif // RALINK_ATE //
-
-
 	if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP)
     	pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE;
 	MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));

drivers/staging/rt2870/sta_ioctl.c

@@ -281,40 +281,6 @@ static struct {
 	{"Debug",						Set_Debug_Proc},
 #endif
 
-#ifdef RALINK_ATE
-	{"ATE",							Set_ATE_Proc},
-	{"ATEDA",						Set_ATE_DA_Proc},
-	{"ATESA",						Set_ATE_SA_Proc},
-	{"ATEBSSID",					Set_ATE_BSSID_Proc},
-	{"ATECHANNEL",					Set_ATE_CHANNEL_Proc},
-	{"ATETXPOW0",					Set_ATE_TX_POWER0_Proc},
-	{"ATETXPOW1",					Set_ATE_TX_POWER1_Proc},
-	{"ATETXANT",					Set_ATE_TX_Antenna_Proc},
-	{"ATERXANT",					Set_ATE_RX_Antenna_Proc},
-	{"ATETXFREQOFFSET",				Set_ATE_TX_FREQOFFSET_Proc},
-	{"ATETXBW",						Set_ATE_TX_BW_Proc},
-	{"ATETXLEN",					Set_ATE_TX_LENGTH_Proc},
-	{"ATETXCNT",					Set_ATE_TX_COUNT_Proc},
-	{"ATETXMCS",					Set_ATE_TX_MCS_Proc},
-	{"ATETXMODE",					Set_ATE_TX_MODE_Proc},
-	{"ATETXGI",						Set_ATE_TX_GI_Proc},
-	{"ATERXFER",					Set_ATE_RX_FER_Proc},
-	{"ATERRF",						Set_ATE_Read_RF_Proc},
-	{"ATEWRF1",						Set_ATE_Write_RF1_Proc},
-	{"ATEWRF2",						Set_ATE_Write_RF2_Proc},
-	{"ATEWRF3",						Set_ATE_Write_RF3_Proc},
-	{"ATEWRF4",						Set_ATE_Write_RF4_Proc},
-	{"ATELDE2P",				    Set_ATE_Load_E2P_Proc},
-	{"ATERE2P",						Set_ATE_Read_E2P_Proc},
-	{"ATESHOW",						Set_ATE_Show_Proc},
-	{"ATEHELP",						Set_ATE_Help_Proc},
-
-#ifdef RALINK_28xx_QA
-	{"TxStop",						Set_TxStop_Proc},
-	{"RxStop",						Set_RxStop_Proc},
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 #ifdef WPA_SUPPLICANT_SUPPORT
     {"WpaSupport",                  Set_Wpa_Support},
 #endif // WPA_SUPPLICANT_SUPPORT //
@@ -1942,14 +1908,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     memset(extra, 0x00, IW_PRIV_SIZE_MASK);
     sprintf(extra, "\n\n");
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-	    sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	    //sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->ate.TxDoneCount);
-	}
-	else
-#endif // RALINK_ATE //
 	{
     sprintf(extra+strlen(extra), "Tx success                      = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
     sprintf(extra+strlen(extra), "Tx success without retry        = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
@@ -1965,22 +1923,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
     sprintf(extra+strlen(extra), "Rx duplicate frame              = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
 
     sprintf(extra+strlen(extra), "False CCA (one second)          = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		if (pAd->ate.RxAntennaSel == 0)
-		{
-    		sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta));
-			sprintf(extra+strlen(extra), "RSSI-C (if available)           = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta));
-		}
-		else
-		{
-    		sprintf(extra+strlen(extra), "RSSI                            = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta));
-		}
-	}
-	else
-#endif // RALINK_ATE //
 	{
     	sprintf(extra+strlen(extra), "RSSI-A                          = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
         sprintf(extra+strlen(extra), "RSSI-B (if available)           = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
@@ -2895,13 +2837,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 			{
 				if (bbpId <= 136)
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
 					}
@@ -2927,15 +2862,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 			{
 				if (bbpId <= 136)
 				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						//Read it back for showing
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
 					{
 					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
     					//Read it back for showing
@@ -2970,13 +2896,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
 		{
 		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
                 break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
 			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
 			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId*2, regBBP);
 			if (bbpId%5 == 4)
@@ -3306,13 +3225,6 @@ INT RTMPSetInformation(
             }
             break;
         case OID_802_11_BSSID_LIST_SCAN:
- #ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             Now = jiffies;
 			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
 
@@ -3414,13 +3326,6 @@ INT RTMPSetInformation(
             }
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
             if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
                 Status  = -EINVAL;
             else
@@ -4046,13 +3951,6 @@ INT RTMPSetInformation(
 			break;
 
 		case OID_802_11_DISASSOCIATE:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				break;
-			}
-#endif // RALINK_ATE //
 			//
 			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
 			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
@@ -4634,16 +4532,6 @@ INT RTMPQueryInformation(
 				Status = -EFAULT;
             }
             break;
-#ifdef RALINK_ATE
-		case RT_QUERY_ATE_TXDONE_COUNT:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n"));
-			wrq->u.data.length = sizeof(UINT32);
-			if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-			break;
-#endif // RALINK_ATE //
         case OID_802_11_BSSID_LIST:
             if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
             {
@@ -4785,14 +4673,6 @@ INT RTMPQueryInformation(
             Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
             break;
         case OID_802_11_BSSID:
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
-				Status = NDIS_STATUS_RESOURCES;
-				break;
-			}
-#endif // RALINK_ATE //
             if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
             {
                 Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
@@ -5497,15 +5377,6 @@ INT rt28xx_sta_ioctl(
 
 	switch(cmd)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		case RTPRIV_IOCTL_ATE:
-			{
-				RtmpDoAte(pAd, wrq);
-			}
-			break;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
         case SIOCGIFHWADDR:
 			DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
 			memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
@@ -6729,13 +6600,6 @@ VOID RTMPIoctlMAC(
                         UCHAR R66;
                         pAdapter->BbpTuning.bEnable = FALSE;
                         R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
 						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
                         DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
                     }