Commit ae70b190 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: ab8500-codec: Revert back to regmap

Commit ff795d61 ("ASoC: ab8500: Convert register I/O to regmap")
initially converted the ab8500 CODEC driver to use regmap rather than
legacy ASoC IO. This was reverted though in commit 63e6d43b ("ASoC:
ab8500: Revert to using custom I/O functions") since the inital conversion
was not working properly. This was presumebly because the SOC_SINGLE_XR_SX
controls, which are used by this driver, did not properly support regmap at
that point. This has since been fixed in commit 6137a5ca ("ASoC: Prepare
SOC_SINGLE_XR_SX controls for regmap"). So revert back to regmap again.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 6391fffb
......@@ -125,6 +125,8 @@ struct ab8500_codec_drvdata_dbg {
/* Private data for AB8500 device-driver */
struct ab8500_codec_drvdata {
struct regmap *regmap;
/* Sidetone */
long *sid_fir_values;
enum sid_state sid_status;
......@@ -165,49 +167,35 @@ static inline const char *amic_type_str(enum amic_type type)
*/
/* Read a register from the audio-bank of AB8500 */
static unsigned int ab8500_codec_read_reg(struct snd_soc_codec *codec,
unsigned int reg)
static int ab8500_codec_read_reg(void *context, unsigned int reg,
unsigned int *value)
{
struct device *dev = context;
int status;
unsigned int value = 0;
u8 value8;
status = abx500_get_register_interruptible(codec->dev, AB8500_AUDIO,
reg, &value8);
if (status < 0) {
dev_err(codec->dev,
"%s: ERROR: Register (0x%02x:0x%02x) read failed (%d).\n",
__func__, (u8)AB8500_AUDIO, (u8)reg, status);
} else {
dev_dbg(codec->dev,
"%s: Read 0x%02x from register 0x%02x:0x%02x\n",
__func__, value8, (u8)AB8500_AUDIO, (u8)reg);
value = (unsigned int)value8;
}
status = abx500_get_register_interruptible(dev, AB8500_AUDIO,
reg, &value8);
*value = (unsigned int)value8;
return value;
return status;
}
/* Write to a register in the audio-bank of AB8500 */
static int ab8500_codec_write_reg(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
static int ab8500_codec_write_reg(void *context, unsigned int reg,
unsigned int value)
{
int status;
status = abx500_set_register_interruptible(codec->dev, AB8500_AUDIO,
reg, value);
if (status < 0)
dev_err(codec->dev,
"%s: ERROR: Register (%02x:%02x) write failed (%d).\n",
__func__, (u8)AB8500_AUDIO, (u8)reg, status);
else
dev_dbg(codec->dev,
"%s: Wrote 0x%02x into register %02x:%02x\n",
__func__, (u8)value, (u8)AB8500_AUDIO, (u8)reg);
struct device *dev = context;
return status;
return abx500_set_register_interruptible(dev, AB8500_AUDIO,
reg, value);
}
static const struct regmap_config ab8500_codec_regmap = {
.reg_read = ab8500_codec_read_reg,
.reg_write = ab8500_codec_write_reg,
};
/*
* Controls - DAPM
*/
......@@ -2564,9 +2552,6 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
static struct snd_soc_codec_driver ab8500_codec_driver = {
.probe = ab8500_codec_probe,
.read = ab8500_codec_read_reg,
.write = ab8500_codec_write_reg,
.reg_word_size = sizeof(u8),
.controls = ab8500_ctrls,
.num_controls = ARRAY_SIZE(ab8500_ctrls),
.dapm_widgets = ab8500_dapm_widgets,
......@@ -2591,6 +2576,15 @@ static int ab8500_codec_driver_probe(struct platform_device *pdev)
drvdata->anc_status = ANC_UNCONFIGURED;
dev_set_drvdata(&pdev->dev, drvdata);
drvdata->regmap = devm_regmap_init(&pdev->dev, NULL, &pdev->dev,
&ab8500_codec_regmap);
if (IS_ERR(drvdata->regmap)) {
status = PTR_ERR(drvdata->regmap);
dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
__func__, status);
return status;
}
dev_dbg(&pdev->dev, "%s: Register codec.\n", __func__);
status = snd_soc_register_codec(&pdev->dev, &ab8500_codec_driver,
ab8500_codec_dai,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment