Commit aee0b24c authored by Michael Krufky's avatar Michael Krufky Committed by Mauro Carvalho Chehab

V4L/DVB (13347): cx23885: add digital television support for Hauppauge WinTV-HVR1290

Signed-off-by: default avatarMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent a3a4f7e1
......@@ -24,3 +24,4 @@
23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657]
24 -> Hauppauge WinTV-HVR1850 [0070:8541]
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
......@@ -265,6 +265,10 @@ struct cx23885_board cx23885_boards[] = {
.name = "Compro VideoMate E800",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1290] = {
.name = "Hauppauge WinTV-HVR1290",
.portc = CX23885_MPEG_DVB,
},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
......@@ -400,6 +404,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x1858,
.subdevice = 0xe800,
.card = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
}, {
.subvendor = 0x0070,
.subdevice = 0x8551,
.card = CX23885_BOARD_HAUPPAUGE_HVR1290,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
......@@ -819,6 +827,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
mdelay(100);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
/* GPIO-2 Wake# */
......@@ -934,6 +943,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
......@@ -1003,6 +1013,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
......@@ -1023,6 +1034,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
......
......@@ -898,6 +898,7 @@ static int dvb_register(struct cx23885_tsport *port)
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
......
......@@ -79,6 +79,7 @@
#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23
#define CX23885_BOARD_HAUPPAUGE_HVR1850 24
#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
#define CX23885_BOARD_HAUPPAUGE_HVR1290 26
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment