Commit af00148f authored by Michal Kazior's avatar Michal Kazior Committed by Kalle Valo

ath10k: simplify fixed rate selection

Use the existing ieee80211_rate array instead of
definining separate one. This gets rid of the ugly
4-index offset when dealing with 5GHz band.
Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent 6fd4bd26
......@@ -36,21 +36,19 @@
/*********/
static struct ieee80211_rate ath10k_rates[] = {
/* CCK */
{ .bitrate = 10 },
{ .bitrate = 20 },
{ .bitrate = 55 },
{ .bitrate = 110 },
/* OFDM */
{ .bitrate = 60 },
{ .bitrate = 90 },
{ .bitrate = 120 },
{ .bitrate = 180 },
{ .bitrate = 240 },
{ .bitrate = 360 },
{ .bitrate = 480 },
{ .bitrate = 540 },
{ .bitrate = 10, .hw_value = ATH10K_HW_RATE_CCK_LP_1M },
{ .bitrate = 20, .hw_value = ATH10K_HW_RATE_CCK_LP_2M },
{ .bitrate = 55, .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M },
{ .bitrate = 110, .hw_value = ATH10K_HW_RATE_CCK_LP_11M },
{ .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M },
{ .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M },
{ .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M },
{ .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M },
{ .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M },
{ .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M },
{ .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M },
{ .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M },
};
#define ath10k_a_rates (ath10k_rates + 4)
......@@ -5196,22 +5194,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
return ret;
}
/* Helper table for legacy fixed_rate/bitrate_mask */
static const u8 cck_ofdm_rate[] = {
ATH10K_HW_RATE_CCK_LP_1M,
ATH10K_HW_RATE_CCK_LP_2M,
ATH10K_HW_RATE_CCK_LP_5_5M,
ATH10K_HW_RATE_CCK_LP_11M,
ATH10K_HW_RATE_OFDM_6M,
ATH10K_HW_RATE_OFDM_9M,
ATH10K_HW_RATE_OFDM_12M,
ATH10K_HW_RATE_OFDM_18M,
ATH10K_HW_RATE_OFDM_24M,
ATH10K_HW_RATE_OFDM_36M,
ATH10K_HW_RATE_OFDM_48M,
ATH10K_HW_RATE_OFDM_54M,
};
/* Check if only one bit set */
static int ath10k_check_single_mask(u32 mask)
{
......@@ -5359,6 +5341,7 @@ ath10k_bitrate_mask_rate(struct ath10k *ar,
u8 *fixed_rate,
u8 *fixed_nss)
{
struct ieee80211_supported_band *sband;
u8 rate = 0, pream = 0, nss = 0, i;
enum wmi_rate_preamble preamble;
......@@ -5372,17 +5355,12 @@ ath10k_bitrate_mask_rate(struct ath10k *ar,
case WMI_RATE_PREAMBLE_CCK:
case WMI_RATE_PREAMBLE_OFDM:
i = ffs(mask->control[band].legacy) - 1;
sband = &ar->mac.sbands[band];
if (band == IEEE80211_BAND_2GHZ && i < 4)
pream = WMI_RATE_PREAMBLE_CCK;
if (band == IEEE80211_BAND_5GHZ)
i += 4;
if (i >= ARRAY_SIZE(cck_ofdm_rate))
if (WARN_ON(i >= sband->n_bitrates))
return false;
rate = cck_ofdm_rate[i];
rate = sband->bitrates[i].hw_value;
break;
case WMI_RATE_PREAMBLE_HT:
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment