ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4

Following 2 hwmod structures are added
1. usb_host_hs
     The hwmod of usbhs with uhh, ehci and ohci base addresses
     functional clock and ehci, ohci irqs

2. usb_tll_hs
      hwmod of usbhs with the TLL base address and irq.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
[keshava_mgowda@ti.com: rebased to kernel version 3.0, added workarounds for
 hardware issues]
Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
[paul@pwsan.com: fixed multi-line comments, fixed whitespace, fixed S-o-b
 notes, removed spurious TLL->L3 interface]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
 static struct omap_hwmod omap44xx_mpu_hwmod;
 static struct omap_hwmod omap44xx_mpu_private_hwmod;
 static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
 
 /*
  * Interconnects omap_hwmod structures
@@ -5276,6 +5278,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
 };
 
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+	.master		= &omap44xx_usb_host_hs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+	.name = "usb_host_hs",
+	.sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+	&omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+	{
+		.name		= "uhh",
+		.pa_start	= 0x4a064000,
+		.pa_end		= 0x4a0647ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "ohci",
+		.pa_start	= 0x4a064800,
+		.pa_end		= 0x4a064bff,
+	},
+	{
+		.name		= "ehci",
+		.pa_start	= 0x4a064c00,
+		.pa_end		= 0x4a064fff,
+	},
+	{}
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_host_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_host_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap44xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_host_hs_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.mpu_irqs	= omap44xx_usb_host_hs_irqs,
+	.slaves		= omap44xx_usb_host_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+	.masters	= omap44xx_usb_host_hs_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+	.name = "usb_tll_hs",
+	.sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+	{
+		.name		= "tll",
+		.pa_start	= 0x4a062000,
+		.pa_end		= 0x4a063fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_tll_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_tll_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap44xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_tll_hs_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
+	.slaves		= omap44xx_usb_tll_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 
 	/* dmm class */
@@ -5415,13 +5618,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_uart3_hwmod,
 	&omap44xx_uart4_hwmod,
 
+	/* usb host class */
+	&omap44xx_usb_host_hs_hwmod,
+	&omap44xx_usb_tll_hs_hwmod,
+
 	/* usb_otg_hs class */
 	&omap44xx_usb_otg_hs_hwmod,
 
 	/* wd_timer class */
 	&omap44xx_wd_timer2_hwmod,
 	&omap44xx_wd_timer3_hwmod,
-
 	NULL,
 };