Commit afbe7af1 authored by David S. Miller's avatar David S. Miller

Merge tag 'linux-can-fixes-for-3.17-20140918' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2014-09-18

this is a pull request of 8 patches for current net.

A patch by Roger Quadros for the c_can driver fixes the swapped parameters of
the c_can_hw_raminit_ti() function. Oliver Hartkopp adds the missing PCI ids to
the peak_pci driver to support the single channel PCAN ExpressCard 34 adapter.
David Dueck converts the at91_can driver to use proper clock handling
functions. Then there are 5 patches by David Jander and me which fix several
mailbox related problems in the flexcan driver.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 9b67aa4a e77980e5
......@@ -1123,7 +1123,9 @@ static int at91_open(struct net_device *dev)
struct at91_priv *priv = netdev_priv(dev);
int err;
clk_enable(priv->clk);
err = clk_prepare_enable(priv->clk);
if (err)
return err;
/* check or determine and set bittime */
err = open_candev(dev);
......@@ -1149,7 +1151,7 @@ static int at91_open(struct net_device *dev)
out_close:
close_candev(dev);
out:
clk_disable(priv->clk);
clk_disable_unprepare(priv->clk);
return err;
}
......@@ -1166,7 +1168,7 @@ static int at91_close(struct net_device *dev)
at91_chip_stop(dev, CAN_STATE_STOPPED);
free_irq(dev->irq, dev);
clk_disable(priv->clk);
clk_disable_unprepare(priv->clk);
close_candev(dev);
......
......@@ -97,14 +97,14 @@ static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)
ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
writel(ctrl, priv->raminit_ctrlreg);
ctrl &= ~CAN_RAMINIT_DONE_MASK(priv->instance);
c_can_hw_raminit_wait_ti(priv, ctrl, mask);
c_can_hw_raminit_wait_ti(priv, mask, ctrl);
if (enable) {
/* Set start bit and wait for the done bit. */
ctrl |= CAN_RAMINIT_START_MASK(priv->instance);
writel(ctrl, priv->raminit_ctrlreg);
ctrl |= CAN_RAMINIT_DONE_MASK(priv->instance);
c_can_hw_raminit_wait_ti(priv, ctrl, mask);
c_can_hw_raminit_wait_ti(priv, mask, ctrl);
}
spin_unlock(&raminit_lock);
}
......
......@@ -62,7 +62,7 @@
#define FLEXCAN_MCR_BCC BIT(16)
#define FLEXCAN_MCR_LPRIO_EN BIT(13)
#define FLEXCAN_MCR_AEN BIT(12)
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f)
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x7f)
#define FLEXCAN_MCR_IDAM_A (0 << 8)
#define FLEXCAN_MCR_IDAM_B (1 << 8)
#define FLEXCAN_MCR_IDAM_C (2 << 8)
......@@ -125,7 +125,9 @@
FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
/* FLEXCAN interrupt flag register (IFLAG) bits */
#define FLEXCAN_TX_BUF_ID 8
/* Errata ERR005829 step7: Reserve first valid MB */
#define FLEXCAN_TX_BUF_RESERVED 8
#define FLEXCAN_TX_BUF_ID 9
#define FLEXCAN_IFLAG_BUF(x) BIT(x)
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
......@@ -136,6 +138,17 @@
/* FLEXCAN message buffers */
#define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24)
#define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24)
#define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24)
#define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24)
#define FLEXCAN_MB_CODE_RX_OVERRRUN (0x6 << 24)
#define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24)
#define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24)
#define FLEXCAN_MB_CODE_TX_ABORT (0x9 << 24)
#define FLEXCAN_MB_CODE_TX_DATA (0xc << 24)
#define FLEXCAN_MB_CODE_TX_TANSWER (0xe << 24)
#define FLEXCAN_MB_CNT_SRR BIT(22)
#define FLEXCAN_MB_CNT_IDE BIT(21)
#define FLEXCAN_MB_CNT_RTR BIT(20)
......@@ -428,6 +441,14 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
flexcan_write(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
flexcan_write(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
/* Errata ERR005829 step8:
* Write twice INACTIVE(0x8) code to first MB.
*/
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
&regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
&regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
return NETDEV_TX_OK;
}
......@@ -744,6 +765,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
stats->tx_bytes += can_get_echo_skb(dev, 0);
stats->tx_packets++;
can_led_event(dev, CAN_LED_EVENT_TX);
/* after sending a RTR frame mailbox is in RX mode */
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
&regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
netif_wake_queue(dev);
}
......@@ -801,6 +825,7 @@ static int flexcan_chip_start(struct net_device *dev)
struct flexcan_regs __iomem *regs = priv->base;
int err;
u32 reg_mcr, reg_ctrl;
int i;
/* enable module */
err = flexcan_chip_enable(priv);
......@@ -867,8 +892,18 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
flexcan_write(reg_ctrl, &regs->ctrl);
/* Abort any pending TX, mark Mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
/* clear and invalidate all mailboxes first */
for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) {
flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
&regs->cantxfg[i].can_ctrl);
}
/* Errata ERR005829: mark first TX mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
&regs->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
/* mark TX mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
&regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
/* acceptance mask/acceptance code (accept everything) */
......
......@@ -70,6 +70,8 @@ struct peak_pci_chan {
#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */
#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */
#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */
#define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */
#define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */
#define PEAK_PCI_CHAN_MAX 4
......@@ -87,6 +89,7 @@ static const struct pci_device_id peak_pci_tbl[] = {
{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#ifdef CONFIG_CAN_PEAK_PCIEC
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#endif
{0,}
};
......@@ -653,7 +656,8 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
* This must be done *before* register_sja1000dev() but
* *after* devices linkage
*/
if (pdev->device == PEAK_PCIEC_DEVICE_ID) {
if (pdev->device == PEAK_PCIEC_DEVICE_ID ||
pdev->device == PEAK_PCIEC34_DEVICE_ID) {
err = peak_pciec_probe(pdev, dev);
if (err) {
dev_err(&pdev->dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment