net: lpc_eth: Fix crash on ip link up

When a link is already up, the following sequence makes the kernel
block completely:

  ip link set dev eth0 down
  ip link set dev eth0 up

This is because on suspended phy, the following lines

  __lpc_eth_reset(pldat);
  __lpc_eth_init(pldat);

make the LPC ethernet core block (see LPC32x0 manual). The PHY needs to be
(re-)activated low-level first.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/nxp/lpc_eth.c

@@ -1220,6 +1220,9 @@ static int lpc_eth_open(struct net_device *ndev)
 
 	__lpc_eth_clock_enable(pldat, true);
 
+	/* Suspended PHY makes LPC ethernet core block, so resume now */
+	phy_resume(pldat->phy_dev);
+
 	/* Reset and initialize */
 	__lpc_eth_reset(pldat);
 	__lpc_eth_init(pldat);