Commit b007e066 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Bjorn Andersson

arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains

Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.
Signed-off-by: default avatarRajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1594292674-15632-5-git-send-email-rnayak@codeaurora.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 19ecbc84
...@@ -2754,6 +2754,8 @@ mdp: mdp@ae01000 { ...@@ -2754,6 +2754,8 @@ mdp: mdp@ae01000 {
<19200000>, <19200000>,
<19200000>, <19200000>,
<19200000>; <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
interrupt-parent = <&mdss>; interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
...@@ -2771,6 +2773,31 @@ dpu_intf1_out: endpoint { ...@@ -2771,6 +2773,31 @@ dpu_intf1_out: endpoint {
}; };
}; };
}; };
mdp_opp_table: mdp-opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
}; };
dsi0: dsi@ae94000 { dsi0: dsi@ae94000 {
...@@ -2794,6 +2821,9 @@ dsi0: dsi@ae94000 { ...@@ -2794,6 +2821,9 @@ dsi0: dsi@ae94000 {
"iface", "iface",
"bus"; "bus";
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
phys = <&dsi_phy>; phys = <&dsi_phy>;
phy-names = "dsi"; phy-names = "dsi";
...@@ -2819,6 +2849,25 @@ dsi0_out: endpoint { ...@@ -2819,6 +2849,25 @@ dsi0_out: endpoint {
}; };
}; };
}; };
dsi_opp_table: dsi-opp-table {
compatible = "operating-points-v2";
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
}; };
dsi_phy: dsi-phy@ae94400 { dsi_phy: dsi-phy@ae94400 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment