Commit b04cc0d9 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Krzysztof Kozlowski

memory: renesas-rpc-if: Add support for RZ/G2L

SPI Multi I/O Bus Controller on RZ/G2L SoC is almost identical to
the RPC-IF interface found on R-Car Gen3 SoC's.

This patch adds a new compatible string for the RZ/G2L family so
that the timing values on RZ/G2L can be adjusted.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211025205631.21151-8-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
parent 5da9b59b
......@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
......@@ -27,8 +28,8 @@
#define RPCIF_CMNCR_MOIIO_HIZ (RPCIF_CMNCR_MOIIO0(3) | \
RPCIF_CMNCR_MOIIO1(3) | \
RPCIF_CMNCR_MOIIO2(3) | RPCIF_CMNCR_MOIIO3(3))
#define RPCIF_CMNCR_IO3FV(val) (((val) & 0x3) << 14) /* undocumented */
#define RPCIF_CMNCR_IO2FV(val) (((val) & 0x3) << 12) /* undocumented */
#define RPCIF_CMNCR_IO3FV(val) (((val) & 0x3) << 14) /* documented for RZ/G2L */
#define RPCIF_CMNCR_IO2FV(val) (((val) & 0x3) << 12) /* documented for RZ/G2L */
#define RPCIF_CMNCR_IO0FV(val) (((val) & 0x3) << 8)
#define RPCIF_CMNCR_IOFV_HIZ (RPCIF_CMNCR_IO0FV(3) | RPCIF_CMNCR_IO2FV(3) | \
RPCIF_CMNCR_IO3FV(3))
......@@ -126,6 +127,9 @@
#define RPCIF_SMDRENR_OPDRE BIT(4)
#define RPCIF_SMDRENR_SPIDRE BIT(0)
#define RPCIF_PHYADD 0x0070 /* R/W available on R-Car E3/D3/V3M and RZ/G2{E,L} */
#define RPCIF_PHYWR 0x0074 /* R/W available on R-Car E3/D3/V3M and RZ/G2{E,L} */
#define RPCIF_PHYCNT 0x007C /* R/W */
#define RPCIF_PHYCNT_CAL BIT(31)
#define RPCIF_PHYCNT_OCTA(v) (((v) & 0x3) << 22)
......@@ -133,10 +137,12 @@
#define RPCIF_PHYCNT_OCT BIT(20)
#define RPCIF_PHYCNT_DDRCAL BIT(19)
#define RPCIF_PHYCNT_HS BIT(18)
#define RPCIF_PHYCNT_STRTIM(v) (((v) & 0x7) << 15)
#define RPCIF_PHYCNT_CKSEL(v) (((v) & 0x3) << 16) /* valid only for RZ/G2L */
#define RPCIF_PHYCNT_STRTIM(v) (((v) & 0x7) << 15) /* valid for R-Car and RZ/G2{E,H,M,N} */
#define RPCIF_PHYCNT_WBUF2 BIT(4)
#define RPCIF_PHYCNT_WBUF BIT(2)
#define RPCIF_PHYCNT_PHYMEM(v) (((v) & 0x3) << 0)
#define RPCIF_PHYCNT_PHYMEM_MASK GENMASK(1, 0)
#define RPCIF_PHYOFFSET1 0x0080 /* R/W */
#define RPCIF_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
......@@ -244,18 +250,46 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
return PTR_ERR(rpc->dirmap);
rpc->size = resource_size(res);
rpc->type = (enum rpcif_type)of_device_get_match_data(dev);
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
return PTR_ERR_OR_ZERO(rpc->rstc);
}
EXPORT_SYMBOL(rpcif_sw_init);
void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif *rpc)
{
u32 data;
regmap_write(rpc->regmap, RPCIF_PHYWR, 0xa5390000);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000000);
regmap_write(rpc->regmap, RPCIF_PHYWR, 0x00008080);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000022);
regmap_write(rpc->regmap, RPCIF_PHYWR, 0x00008080);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000024);
regmap_read(rpc->regmap, RPCIF_PHYCNT, &data);
regmap_write(rpc->regmap, RPCIF_PHYCNT, data | RPCIF_PHYCNT_CKSEL(3));
regmap_write(rpc->regmap, RPCIF_PHYWR, 0x00000030);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000032);
}
int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
{
u32 dummy;
pm_runtime_get_sync(rpc->dev);
if (rpc->type == RPCIF_RZ_G2L) {
int ret;
ret = reset_control_reset(rpc->rstc);
if (ret)
return ret;
usleep_range(200, 300);
rpcif_rzg2l_timing_adjust_sdr(rpc);
}
/*
* NOTE: The 0x260 are undocumented bits, but they must be set.
* RPCIF_PHYCNT_STRTIM is strobe timing adjustment bits,
......@@ -264,8 +298,15 @@ void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
* On H3 ES1.x, the value should be 0, while on others,
* the value should be 7.
*/
regmap_write(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_STRTIM(7) |
RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260);
if (rpc->type == RPCIF_RCAR_GEN3) {
regmap_write(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_STRTIM(7) |
RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260);
} else {
regmap_read(rpc->regmap, RPCIF_PHYCNT, &dummy);
dummy &= ~RPCIF_PHYCNT_PHYMEM_MASK;
dummy |= RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260;
regmap_write(rpc->regmap, RPCIF_PHYCNT, dummy);
}
/*
* NOTE: The 0x1511144 are undocumented bits, but they must be set
......@@ -282,9 +323,17 @@ void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
regmap_update_bits(rpc->regmap, RPCIF_PHYINT,
RPCIF_PHYINT_WPVAL, 0);
regmap_write(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_SFDE |
RPCIF_CMNCR_MOIIO_HIZ | RPCIF_CMNCR_IOFV_HIZ |
RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
if (rpc->type == RPCIF_RCAR_GEN3)
regmap_write(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_SFDE |
RPCIF_CMNCR_MOIIO_HIZ | RPCIF_CMNCR_IOFV_HIZ |
RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
else
regmap_write(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_SFDE |
RPCIF_CMNCR_MOIIO3(1) | RPCIF_CMNCR_MOIIO2(1) |
RPCIF_CMNCR_MOIIO1(1) | RPCIF_CMNCR_MOIIO0(1) |
RPCIF_CMNCR_IO3FV(2) | RPCIF_CMNCR_IO2FV(2) |
RPCIF_CMNCR_IO0FV(2) | RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
/* Set RCF after BSZ update */
regmap_write(rpc->regmap, RPCIF_DRCR, RPCIF_DRCR_RCF);
/* Dummy read according to spec */
......@@ -295,6 +344,8 @@ void rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
pm_runtime_put(rpc->dev);
rpc->bus_size = hyperflash ? 2 : 1;
return 0;
}
EXPORT_SYMBOL(rpcif_hw_init);
......@@ -657,7 +708,8 @@ static int rpcif_remove(struct platform_device *pdev)
}
static const struct of_device_id rpcif_of_match[] = {
{ .compatible = "renesas,rcar-gen3-rpc-if", },
{ .compatible = "renesas,rcar-gen3-rpc-if", .data = (void *)RPCIF_RCAR_GEN3 },
{ .compatible = "renesas,rzg2l-rpc-if", .data = (void *)RPCIF_RZ_G2L },
{},
};
MODULE_DEVICE_TABLE(of, rpcif_of_match);
......
......@@ -130,7 +130,9 @@ static int rpcif_hb_probe(struct platform_device *pdev)
rpcif_enable_rpm(&hyperbus->rpc);
rpcif_hw_init(&hyperbus->rpc, true);
error = rpcif_hw_init(&hyperbus->rpc, true);
if (error)
return error;
hyperbus->hbdev.map.size = hyperbus->rpc.size;
hyperbus->hbdev.map.virt = hyperbus->rpc.dirmap;
......
......@@ -156,7 +156,9 @@ static int rpcif_spi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
rpcif_hw_init(rpc, false);
error = rpcif_hw_init(rpc, false);
if (error)
return error;
error = spi_register_controller(ctlr);
if (error) {
......
......@@ -57,6 +57,11 @@ struct rpcif_op {
} data;
};
enum rpcif_type {
RPCIF_RCAR_GEN3,
RPCIF_RZ_G2L,
};
struct rpcif {
struct device *dev;
void __iomem *base;
......@@ -64,6 +69,7 @@ struct rpcif {
struct regmap *regmap;
struct reset_control *rstc;
size_t size;
enum rpcif_type type;
enum rpcif_data_dir dir;
u8 bus_size;
void *buffer;
......@@ -78,7 +84,7 @@ struct rpcif {
};
int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
void rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
int rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
size_t *len);
int rpcif_manual_xfer(struct rpcif *rpc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment