accel/ivpu: Do not use wait event interruptible

If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:

[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0

To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.

Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com

drivers/accel/ivpu/ivpu_ipc.c

@@ -209,10 +209,10 @@ int ivpu_ipc_receive(struct ivpu_device *vdev, struct ivpu_ipc_consumer *cons,
 	struct ivpu_ipc_rx_msg *rx_msg;
 	int wait_ret, ret = 0;
 
-	wait_ret = wait_event_interruptible_timeout(cons->rx_msg_wq,
-						    (IS_KTHREAD() && kthread_should_stop()) ||
-						    !list_empty(&cons->rx_msg_list),
-						    msecs_to_jiffies(timeout_ms));
+	wait_ret = wait_event_timeout(cons->rx_msg_wq,
+				      (IS_KTHREAD() && kthread_should_stop()) ||
+				      !list_empty(&cons->rx_msg_list),
+				      msecs_to_jiffies(timeout_ms));
 
 	if (IS_KTHREAD() && kthread_should_stop())
 		return -EINTR;
@@ -220,9 +220,6 @@ int ivpu_ipc_receive(struct ivpu_device *vdev, struct ivpu_ipc_consumer *cons,
 	if (wait_ret == 0)
 		return -ETIMEDOUT;
 
-	if (wait_ret < 0)
-		return -ERESTARTSYS;
-
 	spin_lock_irq(&cons->rx_msg_lock);
 	rx_msg = list_first_entry_or_null(&cons->rx_msg_list, struct ivpu_ipc_rx_msg, link);
 	if (!rx_msg) {