Commit b0b41af1 authored by Naga Sureshkumar Relli's avatar Naga Sureshkumar Relli Committed by Michal Simek

dt-bindings: memory: Add pl353 smc controller devicetree binding information

Add pl353 static memory controller devicetree binding information.
Signed-off-by: default avatarNaga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 65102238
Device tree bindings for ARM PL353 static memory controller
PL353 static memory controller supports two kinds of memory
interfaces.i.e NAND and SRAM/NOR interfaces.
The actual devices are instantiated from the child nodes of pl353 smc node.
Required properties:
- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell".
- reg : Controller registers map and length.
- clock-names : List of input clock names - "memclk", "apb_pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
- address-cells : Must be 2.
- size-cells : Must be 1.
Child nodes:
For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
supported as child nodes.
for NAND partition information please refer the below file
Documentation/devicetree/bindings/mtd/partition.txt
Example:
smcc: memory-controller@e000e000
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
clock-names = "memclk", "apb_pclk";
clocks = <&clkc 11>, <&clkc 44>;
reg = <0xe000e000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region
0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region
0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region
nand_0: flash@e1000000 {
compatible = "arm,pl353-nand-r2p1"
reg = <0 0 0x1000000>;
(...)
};
nor0: flash@e2000000 {
compatible = "cfi-flash";
reg = <1 0 0x2000000>;
};
nor1: flash@e4000000 {
compatible = "cfi-flash";
reg = <2 0 0x2000000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment