Commit b0d077ed authored by Stanley Chu's avatar Stanley Chu Committed by Martin K. Petersen

scsi: ufs-mediatek: add device reset implementation

Add device reset vops implementation in MediaTek UFS driver.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-3-git-send-email-stanley.chu@mediatek.comReviewed-by: default avatarAvri Altman <avri.altman@wdc.com>
Signed-off-by: default avatarStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent fef093ff
...@@ -6,16 +6,25 @@ ...@@ -6,16 +6,25 @@
* Peter Wang <peter.wang@mediatek.com> * Peter Wang <peter.wang@mediatek.com>
*/ */
#include <linux/arm-smccc.h>
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_address.h> #include <linux/of_address.h>
#include <linux/phy/phy.h> #include <linux/phy/phy.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/soc/mediatek/mtk_sip_svc.h>
#include "ufshcd.h" #include "ufshcd.h"
#include "ufshcd-pltfrm.h" #include "ufshcd-pltfrm.h"
#include "unipro.h" #include "unipro.h"
#include "ufs-mediatek.h" #include "ufs-mediatek.h"
#define ufs_mtk_smc(cmd, val, res) \
arm_smccc_smc(MTK_SIP_UFS_CONTROL, \
cmd, val, 0, 0, 0, 0, 0, &(res))
#define ufs_mtk_device_reset_ctrl(high, res) \
ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable) static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
{ {
u32 tmp; u32 tmp;
...@@ -269,6 +278,29 @@ static int ufs_mtk_link_startup_notify(struct ufs_hba *hba, ...@@ -269,6 +278,29 @@ static int ufs_mtk_link_startup_notify(struct ufs_hba *hba,
return ret; return ret;
} }
static void ufs_mtk_device_reset(struct ufs_hba *hba)
{
struct arm_smccc_res res;
ufs_mtk_device_reset_ctrl(0, res);
/*
* The reset signal is active low. UFS devices shall detect
* more than or equal to 1us of positive or negative RST_n
* pulse width.
*
* To be on safe side, keep the reset low for at least 10us.
*/
usleep_range(10, 15);
ufs_mtk_device_reset_ctrl(1, res);
/* Some devices may need time to respond to rst_n */
usleep_range(10000, 15000);
dev_info(hba->dev, "device reset done\n");
}
static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{ {
struct ufs_mtk_host *host = ufshcd_get_variant(hba); struct ufs_mtk_host *host = ufshcd_get_variant(hba);
...@@ -303,6 +335,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = { ...@@ -303,6 +335,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
.pwr_change_notify = ufs_mtk_pwr_change_notify, .pwr_change_notify = ufs_mtk_pwr_change_notify,
.suspend = ufs_mtk_suspend, .suspend = ufs_mtk_suspend,
.resume = ufs_mtk_resume, .resume = ufs_mtk_resume,
.device_reset = ufs_mtk_device_reset,
}; };
/** /**
......
...@@ -6,6 +6,9 @@ ...@@ -6,6 +6,9 @@
#ifndef _UFS_MEDIATEK_H #ifndef _UFS_MEDIATEK_H
#define _UFS_MEDIATEK_H #define _UFS_MEDIATEK_H
#include <linux/bitops.h>
#include <linux/soc/mediatek/mtk_sip_svc.h>
/* /*
* Vendor specific pre-defined parameters * Vendor specific pre-defined parameters
*/ */
...@@ -29,6 +32,12 @@ ...@@ -29,6 +32,12 @@
#define VS_SAVEPOWERCONTROL 0xD0A6 #define VS_SAVEPOWERCONTROL 0xD0A6
#define VS_UNIPROPOWERDOWNCONTROL 0xD0A8 #define VS_UNIPROPOWERDOWNCONTROL 0xD0A8
/*
* SiP commands
*/
#define MTK_SIP_UFS_CONTROL MTK_SIP_SMC_CMD(0x276)
#define UFS_MTK_SIP_DEVICE_RESET BIT(1)
/* /*
* VS_DEBUGCLOCKENABLE * VS_DEBUGCLOCKENABLE
*/ */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment