Commit b0ed0bbf authored by Kevin Lo's avatar Kevin Lo Committed by David S. Miller

net: phy: broadcom: add support for BCM54811 PHY

The BCM54811 PHY shares many similarities with the already supported BCM54810
PHY but additionally requires some semi-unique configuration.
Signed-off-by: default avatarKevin Lo <kevlo@kevlo.org>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d42d118c
......@@ -195,7 +195,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810)
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
return;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
......@@ -214,8 +215,10 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
clk125en = false;
} else {
if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
/* Here, bit 0 _enables_ CLK125 when set */
val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) {
/* Here, bit 0 _enables_ CLK125 when set */
val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
}
clk125en = false;
}
}
......@@ -225,8 +228,13 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
else
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
val |= BCM54XX_SHD_SCR3_TRDDAPD;
if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
val |= BCM54810_SHD_SCR3_TRDDAPD;
else
val |= BCM54XX_SHD_SCR3_TRDDAPD;
}
if (orig != val)
bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
......@@ -327,6 +335,32 @@ static int bcm54xx_resume(struct phy_device *phydev)
return bcm54xx_config_init(phydev);
}
static int bcm54811_config_init(struct phy_device *phydev)
{
int err, reg;
/* Disable BroadR-Reach function. */
reg = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
reg &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
err = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
reg);
if (err < 0)
return err;
err = bcm54xx_config_init(phydev);
/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
BCM54612E_LED4_CLK125OUT_EN | reg);
if (err < 0)
return err;
}
return err;
}
static int bcm5482_config_init(struct phy_device *phydev)
{
int err, reg;
......@@ -722,6 +756,17 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.suspend = genphy_suspend,
.resume = bcm54xx_resume,
}, {
.phy_id = PHY_ID_BCM54811,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54811",
/* PHY_GBIT_FEATURES */
.config_init = bcm54811_config_init,
.config_aneg = bcm5481_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
.suspend = genphy_suspend,
.resume = bcm54xx_resume,
}, {
.phy_id = PHY_ID_BCM5482,
.phy_id_mask = 0xfffffff0,
......@@ -816,6 +861,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM5464, 0xfffffff0 },
{ PHY_ID_BCM5481, 0xfffffff0 },
{ PHY_ID_BCM54810, 0xfffffff0 },
{ PHY_ID_BCM54811, 0xfffffff0 },
{ PHY_ID_BCM5482, 0xfffffff0 },
{ PHY_ID_BCM50610, 0xfffffff0 },
{ PHY_ID_BCM50610M, 0xfffffff0 },
......
......@@ -17,6 +17,7 @@
#define PHY_ID_BCM5395 0x0143bcf0
#define PHY_ID_BCM53125 0x03625f20
#define PHY_ID_BCM54810 0x03625d00
#define PHY_ID_BCM54811 0x03625cc0
#define PHY_ID_BCM5482 0x0143bcb0
#define PHY_ID_BCM5411 0x00206070
#define PHY_ID_BCM5421 0x002060e0
......@@ -255,6 +256,7 @@
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
#define BCM54810_SHD_CLK_CTL 0x3
#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9)
#define BCM54810_SHD_SCR3_TRDDAPD 0x0100
/* BCM54612E Registers */
#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment