Commit b10af3f7 authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab

V4L/DVB (14001): gscpa_sonixb: Differentiate between tas5110c and tas5110d and fix d hstart

Our hstart value was wrong for tas5110d sensor using sonixb cams, this
patch fixes this. Many thanks to Paulus (laudaka) for donating me a camera
with such a sensor IC.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 8d0082fa
......@@ -73,8 +73,9 @@ struct sd {
#define SENSOR_OV7630 2
#define SENSOR_PAS106 3
#define SENSOR_PAS202 4
#define SENSOR_TAS5110 5
#define SENSOR_TAS5130CXX 6
#define SENSOR_TAS5110C 5
#define SENSOR_TAS5110D 6
#define SENSOR_TAS5130CXX 7
__u8 reg11;
};
......@@ -460,13 +461,21 @@ static const __u8 pas202_sensor_init[][8] = {
{0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
};
static const __u8 initTas5110[] = {
static const __u8 initTas5110c[] = {
0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
0x16, 0x12, 0x60, 0x86, 0x2b,
0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
};
/* Same as above, except a different hstart */
static const __u8 initTas5110d[] = {
0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x01, 0x00, 0x41, 0x09, 0x0a,
0x16, 0x12, 0x60, 0x86, 0x2b,
0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
};
static const __u8 tas5110_sensor_init[][8] = {
{0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10},
{0x30, 0x11, 0x02, 0x20, 0xa9, 0x00, 0x00, 0x10},
......@@ -497,7 +506,9 @@ SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
0),
SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
NO_EXPO|NO_FREQ, 0),
SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
0),
......@@ -652,7 +663,8 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_TAS5110: {
case SENSOR_TAS5110C:
case SENSOR_TAS5110D: {
__u8 i2c[] =
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10};
......@@ -704,7 +716,8 @@ static void setexposure(struct gspca_dev *gspca_dev)
struct sd *sd = (struct sd *) gspca_dev;
switch (sd->sensor) {
case SENSOR_TAS5110: {
case SENSOR_TAS5110C:
case SENSOR_TAS5110D: {
__u8 reg;
/* register 19's high nibble contains the sn9c10x clock divider
......@@ -1227,10 +1240,10 @@ static const struct sd_desc sd_desc = {
static const struct usb_device_id device_table[] __devinitconst = {
{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */
{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */
{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment