Commit b12f7a1c authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: serial: kobil_sct.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 826575fc
......@@ -164,13 +164,15 @@ static int kobil_startup(struct usb_serial *serial)
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
endpoint = &altsetting->endpoint[i];
if (usb_endpoint_is_int_out(&endpoint->desc)) {
dbg("%s Found interrupt out endpoint. Address: %d",
dev_dbg(&serial->dev->dev,
"%s Found interrupt out endpoint. Address: %d\n",
__func__, endpoint->desc.bEndpointAddress);
priv->write_int_endpoint_address =
endpoint->desc.bEndpointAddress;
}
if (usb_endpoint_is_int_in(&endpoint->desc)) {
dbg("%s Found interrupt in endpoint. Address: %d",
dev_dbg(&serial->dev->dev,
"%s Found interrupt in endpoint. Address: %d\n",
__func__, endpoint->desc.bEndpointAddress);
priv->read_int_endpoint_address =
endpoint->desc.bEndpointAddress;
......@@ -200,6 +202,7 @@ static void kobil_init_termios(struct tty_struct *tty)
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct device *dev = &port->dev;
int result = 0;
struct kobil_private *priv;
unsigned char *transfer_buffer;
......@@ -215,12 +218,10 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
/* allocate write_urb */
if (!port->write_urb) {
dbg("%s - port %d Allocating port->write_urb",
__func__, port->number);
dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__);
port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->write_urb) {
dbg("%s - port %d usb_alloc_urb failed",
__func__, port->number);
dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__);
kfree(transfer_buffer);
return -ENOMEM;
}
......@@ -247,10 +248,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
transfer_buffer_length,
KOBIL_TIMEOUT
);
dbg("%s - port %d Send get_HW_version URB returns: %i",
__func__, port->number, result);
dbg("Harware version: %i.%i.%i",
transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]);
dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result);
dev_dbg(dev, "Harware version: %i.%i.%i\n", transfer_buffer[0],
transfer_buffer[1], transfer_buffer[2]);
/* get firmware version */
result = usb_control_msg(port->serial->dev,
......@@ -263,10 +263,9 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
transfer_buffer_length,
KOBIL_TIMEOUT
);
dbg("%s - port %d Send get_FW_version URB returns: %i",
__func__, port->number, result);
dbg("Firmware version: %i.%i.%i",
transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]);
dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result);
dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0],
transfer_buffer[1], transfer_buffer[2]);
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
......@@ -282,8 +281,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
0,
KOBIL_TIMEOUT
);
dbg("%s - port %d Send set_baudrate URB returns: %i",
__func__, port->number, result);
dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result);
/* reset all queues */
result = usb_control_msg(port->serial->dev,
......@@ -296,16 +294,14 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
0,
KOBIL_TIMEOUT
);
dbg("%s - port %d Send reset_all_queues URB returns: %i",
__func__, port->number, result);
dev_dbg(dev, "%s - Send reset_all_queues URB returns: %i\n", __func__, result);
}
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
/* start reading (Adapter B 'cause PNP string) */
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
dbg("%s - port %d Send read URB returns: %i",
__func__, port->number, result);
dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result);
}
kfree(transfer_buffer);
......@@ -333,11 +329,9 @@ static void kobil_read_int_callback(struct urb *urb)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
/* char *dbg_data; */
if (status) {
dbg("%s - port %d Read int status not zero: %d",
__func__, port->number, status);
dev_dbg(&port->dev, "%s - Read int status not zero: %d\n", __func__, status);
return;
}
......@@ -346,6 +340,8 @@ static void kobil_read_int_callback(struct urb *urb)
/* BEGIN DEBUG */
/*
char *dbg_data;
dbg_data = kzalloc((3 * purb->actual_length + 10)
* sizeof(char), GFP_KERNEL);
if (! dbg_data) {
......@@ -354,7 +350,7 @@ static void kobil_read_int_callback(struct urb *urb)
for (i = 0; i < purb->actual_length; i++) {
sprintf(dbg_data +3*i, "%02X ", data[i]);
}
dbg(" <-- %s", dbg_data);
dev_dbg(&port->dev, " <-- %s\n", dbg_data);
kfree(dbg_data);
*/
/* END DEBUG */
......@@ -365,8 +361,7 @@ static void kobil_read_int_callback(struct urb *urb)
tty_kref_put(tty);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
dbg("%s - port %d Send read URB returns: %i",
__func__, port->number, result);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
......@@ -384,15 +379,14 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
struct kobil_private *priv;
if (count == 0) {
dbg("%s - port %d write request of 0 bytes",
__func__, port->number);
dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
return 0;
}
priv = usb_get_serial_port_data(port);
if (count > (KOBIL_BUF_LENGTH - priv->filled)) {
dbg("%s - port %d Error: write request bigger than buffer size", __func__, port->number);
dev_dbg(&port->dev, "%s - Error: write request bigger than buffer size\n", __func__);
return -ENOMEM;
}
......@@ -432,8 +426,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
priv->cur_pos = priv->cur_pos + length;
result = usb_submit_urb(port->write_urb, GFP_NOIO);
dbg("%s - port %d Send write URB returns: %i",
__func__, port->number, result);
dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
todo = priv->filled - priv->cur_pos;
if (todo > 0)
......@@ -448,8 +441,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
result = usb_submit_urb(port->interrupt_in_urb,
GFP_NOIO);
dbg("%s - port %d Send read URB returns: %i",
__func__, port->number, result);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
}
return count;
......@@ -493,8 +485,8 @@ static int kobil_tiocmget(struct tty_struct *tty)
transfer_buffer_length,
KOBIL_TIMEOUT);
dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x",
__func__, port->number, result, transfer_buffer[0]);
dev_dbg(&port->dev, "%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n",
__func__, result, transfer_buffer[0]);
result = 0;
if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0)
......@@ -507,6 +499,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct device *dev = &port->dev;
struct kobil_private *priv;
int result;
int dtr = 0;
......@@ -538,11 +531,9 @@ static int kobil_tiocmset(struct tty_struct *tty,
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
if (dtr != 0)
dbg("%s - port %d Setting DTR",
__func__, port->number);
dev_dbg(dev, "%s - Setting DTR\n", __func__);
else
dbg("%s - port %d Clearing DTR",
__func__, port->number);
dev_dbg(dev, "%s - Clearing DTR\n", __func__);
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
SUSBCRequest_SetStatusLinesOrQueues,
......@@ -554,11 +545,9 @@ static int kobil_tiocmset(struct tty_struct *tty,
KOBIL_TIMEOUT);
} else {
if (rts != 0)
dbg("%s - port %d Setting RTS",
__func__, port->number);
dev_dbg(dev, "%s - Setting RTS\n", __func__);
else
dbg("%s - port %d Clearing RTS",
__func__, port->number);
dev_dbg(dev, "%s - Clearing RTS\n", __func__);
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
SUSBCRequest_SetStatusLinesOrQueues,
......@@ -569,8 +558,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
0,
KOBIL_TIMEOUT);
}
dbg("%s - port %d Send set_status_line URB returns: %i",
__func__, port->number, result);
dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
kfree(transfer_buffer);
return (result < 0) ? result : 0;
}
......@@ -658,7 +646,8 @@ static int kobil_ioctl(struct tty_struct *tty,
KOBIL_TIMEOUT
);
dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result);
dev_dbg(&port->dev,
"%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result);
kfree(transfer_buffer);
return (result < 0) ? -EIO: 0;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment