Commit b151d9a2 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Mauro Carvalho Chehab

[media] as3645a: move relevant code under __devinit/__devexit

There is no needs to keep .remove under .exit.text. This driver is for a
standalone chip that could be on any board and connected to any i2c bus.

At the same time we don't need to keep the as3645a_probe() after initializing
the device. Therefore we mark it and relevant functions with __devinit tag.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 31ed29f9
......@@ -713,7 +713,7 @@ static int as3645a_resume(struct device *dev)
* The number of LEDs reported in platform data is used to compute default
* limits. Parameters passed through platform data can override those limits.
*/
static int as3645a_init_controls(struct as3645a *flash)
static int __devinit as3645a_init_controls(struct as3645a *flash)
{
const struct as3645a_platform_data *pdata = flash->pdata;
struct v4l2_ctrl *ctrl;
......@@ -804,8 +804,8 @@ static int as3645a_init_controls(struct as3645a *flash)
return flash->ctrls.error;
}
static int as3645a_probe(struct i2c_client *client,
const struct i2c_device_id *devid)
static int __devinit as3645a_probe(struct i2c_client *client,
const struct i2c_device_id *devid)
{
struct as3645a *flash;
int ret;
......@@ -846,7 +846,7 @@ static int as3645a_probe(struct i2c_client *client,
return ret;
}
static int __exit as3645a_remove(struct i2c_client *client)
static int __devexit as3645a_remove(struct i2c_client *client)
{
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
struct as3645a *flash = to_as3645a(subdev);
......@@ -877,7 +877,7 @@ static struct i2c_driver as3645a_i2c_driver = {
.pm = &as3645a_pm_ops,
},
.probe = as3645a_probe,
.remove = __exit_p(as3645a_remove),
.remove = __devexit_p(as3645a_remove),
.id_table = as3645a_id_table,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment